Sirius Satellite Radio SEM51 Leitfaden

SEM51

User & Installation Manual

when Sirius ducting is used.

Full replacement warranty on parts and labour.

Year

Warranty

www.siriusbrand.com

BEFORE YOU INSTALL 4

BEFORE YOU INSTALL - MOTOR WIRING CONNECTION 4

BEFORE YOU INSTALL - DUCTING INFORMATION 5

INSTALLING THE SEM51 MOTOR 6

OPTIONAL MESH FILTER 8

BRACKET AND INTERNAL PIPE DIMENSIONS 9

SEM51 MOTOR WIRING DIAGRAM 10

WARRANTY INFORMATION 11

TABLE OF CONTENTS

This installation should only be performed by a qualified tradesperson. Where possible, use a trained Sirius recommended

installer (see Siriusbrand.com). Sirius will not be held responsible for issues that occur due to installation of product by an

unqualified tradesperson.

• Motor must be accessible for servicing purposes. If not, servicing may be refused unless access can be provided.

Prior to install please check minimum & maximum installation details on the Sirius website, FAQ under support tab.

Service is offered during normal business hours only, also appliances to have a clear access in a serviceable area.

• The ducting of the rangehood must not be connected to ducting which is used for exhausting other fumes from

appliances, such as central heating, boilers etc.

• For the external exhausting of the fumes, comply with the Australian building standards.

• Ventilate the room suitably according to the Australian building standards when the appliance is working together with

gas or oil appliances.

• The SEM motor is powered by the rangehood. Standard 10AMP GPO at the point of rangehood required.

• Before connecting the rangehood to the mains supply, make sure that the voltage indicated in the rating plate

corresponds to the mains voltage in the home.

• Before carrying out any sort of maintenance or cleaning operation, make sure that the appliance is disconnected from

the electrical mains.

IMPORTANT INFORMATION BEFORE INSTALLATION IN YOUR SIRIUS RANGEHOOD

• FLASHING NOT INCLUDED

• Sirius has metal and tiled roof flashing available in various sizes from your retailer,

or visit www.siriusbrand.com

• Rangehood and SEM5 XS316 must be a minimum of 2 metres between rangehood and motor for noise reduction

reasons.

• Only use ducting that falls within the necessary minimum and maximum length requirements as specified in the

installation guide.

• Try and minimise bends to the ducting for optimum performance.

• Use only suitable ducting as specified by Sirius. Under no circumstances is flexible ducting to be used as it creates

unwanted noise, vibration and can place the motor under unnecessary stress resulting in premature failure of the SEM

motor.

• Under no circumstances is the duct diameter is the duct diameter to be reduced. A constant minimum diameter of

150mm for the SEM 5 must be maintained at all times.

• Read the mounting and operating instructions of the rangehood carefully.

• The manufacturer cannot be held responsible for a decrease of the airflow or for an increase of noise level caused by

non-compliance with the instructions above.

BEFORE YOU INSTALL

WARNING

1. Remove the four screws holding the front of the housing in place to

expose the connections.

2. Following the wiring chart on the front of the housing, connect each wire

to the matching colour, making sure that this is done correctly before running

power to the unit.

3. Replace the cover and fix the four screws back into place.

MOTOR WIRING CONNECTION

The symbol on the product or on its packaging indicates that this product

may not be treated as house-hold waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed information about

recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the

product. This appliance is marked according to the European directive

2002/96/EC on waste electrical and electronic equipment (WEEE).

Sirius warranty covers only Sirius product. If you choose to install a non-Sirius branded accessory

such as flexible ducting, Sirius will only warrant the rangehood and motor. If installation is found to be

the cause of failure or issue then charges will apply for service and parts.

Flexible ducting is not permitted under any circumstances. Flexible ducting has been found to

increase noise levels, increase vibration and reduce airflow. Sirius Semi-rigid or solid ducting can be

used in lieu. There is a range available to suit any application.

Ducting available at www.siriusbrand.com

6 Year Warranty when Sirius Ducting is used. Full replacement warranty on parts and labour.

See website for terms & conditions.

A reduction in the duct diameter from stated ducting size will void warranty.

If you are in doubt about the ducting, please contact Sirius on 1300 762 219 prior to installation

WARNING

The appliance must be installed and

connected to the power supply only by a

qualified technician.

• There should be adequate ventilation of the room when the rangehood is used at the same time as

appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the

room)

• The details concerning the method and frequency of cleaning

• There is a fire risk if cleaning is not carried out in accordance with the instructions;

• Do not flambé under the range hood;

• CAUTION: Accessible parts may become hot when used with cooking appliances.

BEFORE YOU INSTALL - DUCTING INFORMATION

1. Pre determine the exit point where the roof

penetration will be and prepare a hole of 205 mm to

accommodate the motor flue.

2. Fix the Internal Bracket on the inside of the roof

cavity using the 9 x 25mm Screws Supplied in

the packaging. (Fig. 1) Please note that if there is

no timber supports to hold the Internal bracket,

horozontal timber supports (not supplied) may need to

be fitted.

3. Fit the roof flashing to the 200mm diameter steel

pipe (as on Fig. 2) and insert the pipe through the

roof penetration and internal bracket. Sirius Roof

Flashing can be purchased through your retailer or at

Siriusbrand.com. Metal roof flashing code: MRF G178,

Tiled Roof Flashing code: TRF G075

4. Fix the 200mm pipe to the internal bracket with the 8 x

supplied 9.5mm screws. Please note that the 200mm

pipe has no pre drilled holes and will need to be drilled

at the desired height by the installer. A minimum of

100mm exposed section of 200mm pipe is required to

accomodate the flashing. (Fig. 3)

INSTALLATION

(Fig. 3) 8 x 9.5mm long screws

(Fig. 2)

(Fig. 1)

NOTE

Please be aware for noise reasons the the

SEM51 motor is required to be a minimum or 2

metres from the location of the rangehood. 3-5

metres is best practice installation.

The motor has a 7 metre long control cable

which cannot be lengthened under any

circumstances. Any attempt to modify this

product in any way will immediately void the

manufacturer warranty.

5. Once the 200mm pipe is securely fitted to the internal

bracket, connect 150mm ducting to the motor.

Please note, do not use screws to fix the ductwork

to this section as it will prevent the non return valves

from opening during operation. Low grade flexible

ducting should not be used under any circumstances

as it will void the manyfacturer warranty. A minimum

requirement semi rigid duct work can be used. See

approved range of ducting at www.siriusbrand.com

6. Feed the attached ductwork and power cable through

the 200mm section of pipe into the roof cavity. (Fig. 4)

7. Fix the motor to the exposed section of the 200mm

pipe and secure in place with the supplied 8 x 5mm

screws. Please note that the exit point on the motor

needs to be positioned on the low side of the pitch on

the roof. (Fig 5.)

8. Run the motor power cable back to the location of

the rangehood and plug in the connections. Follow

the MOTOR WIRING CONNECTION instructions on

page 4 of this manual to connect the motor to the

rangehood.

(Fig. 5)

low side

(Fig. 4)

9. Run the ductwork from the motor location back to the

location of the rangehood. Connect the ductwork to

the plastic outlet collar on the rangehood and secure

in place. Please note, do not use screws to fix the

ductwork to the rangehood as it will prevent the non

return valves from opening during operation.

10. Plug the rangehood into a 10 amp GPO located within

1 Metre of the rangehood. Press the red reset button

until you feel a click, you will now have power to the

hood and motor and can begin operation of your

Sirius Rangehood.

Note: Never reduce the ducting diameter under any

circumstances as it will severly effect the performance

and increase noise level of your rangehood.

A 150mm constant diameter duct run is required.

Avoid abrupt changes in direction of your ductwork.

For every 90 degree bend, reduce your maximum

duct length by 1 metre. Example: 2 x 90 degree bend,

maximum duct length should not exceed 5 metres.

Sirius strongly recommend that the installation of

the SEM51 motor should only be performed by a

suitably qualified tradesperson. Sirius will not be held

responsible for any ongoing issues due to incorrect or

sub standard installation by an unqualified installer.

IMPORTANT

BAL40 MESH OPTIONAL

Part number: SPS-75105000598

Remove the 4 screws holding the existing ventillation

cover in place and take off. Fit the BAL40 mesh into place

and replace the 4 screws. Refer to Fig. 6.

(Fig. 6)

BRACKET AND INTERNAL PIPE DIMENSIONS

600mm

515mm

200mm diameter

254mm

Top view

Side view

Flue ceiling brace

254mm 71mm

SEM51 MOTOR WIRING DIAGRAM

Inhaltsverzeichnis

Andere Sirius Satellite Radio Dunstabzugshaube Handbücher

Sirius Satellite Radio

Sirius Satellite Radio SUT951 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SILT-26 Series Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT968 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio Valentina SLT958EM Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT960 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio ALFRESCO SLEM80 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT105 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SDD2ELEMTC Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Stone SU-DD2-L Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SL913 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio ALFRESCO SL83 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT972 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SILT18 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLTC EM 107 G900 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUT958 H200 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio S-DDH1 Benutzerhandbuch

Sirius Satellite Radio

Sirius Satellite Radio SLTC928 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT950 EM Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SILT-28 Series Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SUT950 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio Alfresco SIL25FRESCO1200 Bedienungsanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLT972 Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SIL-EM490X Kurzanleitung

Sirius Satellite Radio

Sirius Satellite Radio SLTC919 520 Bedienungsanleitung

Beliebte Dunstabzugshaube Handbücher anderer Marken

emmeti

emmeti RECUPA MED A-140 Leitfaden

Nibe

Nibe F135 Bedienungsanleitung

Zephyr

Zephyr Spruce AK9834BS Installationsanleitung

Kuppersberg

Kuppersberg INTRO 60 Montage- und Wartungsanleitung

Hisense

Hisense MH6INBG Bedienungsanleitung

Miele

Miele DA 1255 Bedienungsanleitung

Broan

Broan 46000 Bedienungsanleitung

GE Profile PV977 Originalbetriebsanleitung

FALMEC

FALMEC FFRIA24W5FS Bedienungsanleitung

Whirlpool

Whirlpool RH2600XL-1 SERIES Bedienungsanleitung

ETNA

ETNA AV360RVS Bedienungsanleitung

JUNO

JUNO JDF603E6 Bedienungsanleitung

Miele

Miele DA 6708 D Bedienungsanleitung

Tricity Bendix

Tricity Bendix LE 150 Handbuch

AEG

AEG X68163BV1 Bedienungsanleitung

AEG

AEG 125 D Bedienungsanleitung

Smeg

Smeg KSEV97X Bedienungsanleitung

Nibe

Nibe S Series Benutzerhandbuch