SMART 600i Bedienungsanleitung

K.O.H.

rail

K.O.H.

Smart board

bracket

K.O.H mounting spacers

Preparing for the installation

SMART includes a “mounting template” with each of its 600i interactive whiteboard

systems. This mounting template can NOT be used since the SMART board will hang

from the rail.

The first procedure is to plan where to position/mount the Unifi projector, make

sure it’s at a safe height, while maintaining enough space for airflow above the

unit.(see SMART’s instruction).

Be sure to position the projector bracket/KOH mounting spacers no less than 5"

(12.7 cm) from the ceiling to provide adequate airflow around the projector.

Guidelines for Installing Interactive Whiteboard 600i system with K.O.H. Rail

system

page 1 of 3 K.O.H. installation manual for SMART 600i

Locate a stud (if FRAMED WALL) near the location where you plan to mount the

projector, and mark it. You should attach one (1) of the two (2) spacers near the

center of the assembly to this stud.

Contrary to the regular 600i installation, you should install the SMART board on

the KOH rail system before you mount the projector. Because the distance

between the top of the smart board (top of the frame) to the bottom of

f

SMART’s “mounting plate” should be 3“ inches.

Preparing for the installation

Proceed to Installation

You should install the Smart board on the KOH rail system before you install the KOH

mounting spacers and projector.

1. Install KOH rail per instructions. (Above the whiteboard/blackboard if that is the

application).

2. Attach brackets to SMART board, and hang it on the rail.

NOTE: The KOH brackets allow for 8 different height settings of the SMART board.

You should use the top holes. Keep in mind you need 3” from the top of

Guidelines for Installing Interactive Whiteboard 600i system with K.O.H. Rail

system

page 2 of 3 K.O.H. installation manual for SMART 600i

the SMART board to the bottom of the projector mount.

Guidelines for Installing Interactive Whiteboard 600i system with K.O.H. Rail

system

Proceed to Installation (continued from page 2)

page 3 of 3 K.O.H. installation manual for SMART 600i

K.O.H. MOUNTING STRIPS/SPACERS FOR 680i3

3. Measure 3” from the top of the SMART board’s frame and mark it. This marks the

bottom where the KOH mounting block will be positioned/installed.

4. Attach SMARTs’ “mounting plate” using appropriate long screws or bolts (not

included in KOH kit).

5. Drill holes in the wall for the 2 holes on the side.

6. Mount the assembly on the wall with the bottom of the Smarts’ “mounting plate”

at the 3” mark. If you are mounting on a framed wall, mount one (1) of the

two (2) spacers in the center to a stud.

7. Proceed using SMART’s regular instructions for the 600i system.

Andere Handbücher für 600i

1

Inhaltsverzeichnis

Andere SMART Interaktives Whiteboard Handbücher

SMART

SMART FS640 Bedienungsanleitung

SMART

SMART SmartBoard 600 Series Bedienungsanleitung

SMART

SMART board 8000i-G4 series Betriebsanleitung

SMART

SMART SBX880 Bedienungsanleitung

SMART

SMART SB880i5-MP Bedienungsanleitung

SMART

SMART Table 230i Bedienungsanleitung

SMART

SMART SBID 8084i-G4 Bedienungsanleitung

SMART

SMART M600i6 Bedienungsanleitung

SMART

SMART Board 800 Series Bedienungsanleitung

SMART

SMART kapp iQ 55 Bedienungsanleitung

SMART

SMART kapp iQ 55 Bedienungsanleitung

SMART

SMART 8055i Bedienungsanleitung

SMART

SMART SmartBoard 600i2 Bedienungsanleitung

SMART

SMART KAPP IQ Installationsanleitung

SMART

SMART SBID 8070i-G4 Bedienungsanleitung

SMART

SMART SBM600i6 Bedienungsanleitung

SMART

SMART 880i5-SMP Bedienungsanleitung

SMART

SMART 8070i-SMP Bedienungsanleitung

SMART

SMART SMART Board Bedienungsanleitung

SMART

SMART SBID8055i-G5-SMP Service-Handbuch

SMART

SMART 8084i-G4-SMP Bedienungsanleitung

SMART

SMART Board 600i4 Bedienungsanleitung

SMART

SMART SBX880 Bedienungsanleitung

SMART

SMART SBX885 Bedienungsanleitung

Beliebte Interaktives Whiteboard Handbücher anderer Marken

HitachiSoft

HitachiSoft StarBoard FX-TRIO-88W Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART Board

SMART Board 680 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

SMART Board

SMART Board SBM685ix2 Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Panasonic

Panasonic UB-5335 Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Plus

Plus M-11S Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung

AVer

AVer CP series Bedienungsanleitung

Genee

Genee 56" Bedienungsanleitung