Soleus Air SE-PAC-08E9 Bedienungsanleitung

8,000 BTU Portable Air Conditioner

Operating Instructions

V.130711

Model No.:SE-PAC-08E9

Reference No.:KY-80E9

3092402

Thank you for choosing a Soleus Air Portable Air Conditioner. This owner’s manual will provide

you with valuable information necessary for the proper care and maintenance of your new product.

Please take a few moments to thoroughly read the instructions and familiarize yourself with all the

operational aspects of your new Soleus Air Portable Air Conditioner.

For your own records, please attach a copy of your sales receipt to this manual. Also, write the

store name/location, date purchased, and serial number below:

Store Name: ____________________________________________________

Location: ______________________________________________________

Date Purchased: _________________________________________________

Serial Number (located on back of unit): ______________________________

IMPORTANT INSTRUCTIONS

Before installing and using your portable air conditioner, please read this owner’s manual carefully. Store this

manual in a safe place for future reference.

1) Always place the unit on a level surface.

2) Never use or store gasoline or other flammable vapor or liquid near this unit unless instructed by this manual.

3) Maintain at least 10 inches (25 cm) clearance space around this unit. Do not block or cover air inlet or outlet

grilles.

4) The unit must be connected to a correctly grounded power supply.

5) Do not start or stop the unit by inserting or pulling out the power plug.

6) Do not use an adapter plug or extension cord.

7) Do not use the unit in the immediate surroundings of a bath, a shower or a swimming pool.

8) Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills unless instructed by this

manual.

9) Do not let children play near this unit.

10) Always inspect the cord for signs of damage before use. If the power cord is damaged, it must be replaced by

the manufacturer or a qualified service technician.

11) When cleaning the unit, always turn the unit off and unplug the power cord.

12) Do Not Mix Old And New Batteries.

Do Not Mix Alkaline, Standard (Carbon - Zinc), Or Rechargeable (Nickel - Cadmium) Batteries.

SPECIFICATIONS

 The cooling capacity is measured at an ambient temperature of DB 86 °F, WB 78 °F.

 Noise level is measured at a distance of 3.28 ft away from the front of the unit, when the unit is in cooling mode.

 Power consumption is measured when the fan runs at the highest speed setting.

 These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.

 If the environment temperature is higher than the max operating temperature or lower than the minimum operat-

ing temperature, the air conditioner may not work properly.

PACKAGE CONTENTS

MODEL NUMBER SE-PAC-08E9

REFERENCE NUMBER KY-80E9

COOLING CAPACITY 8,000 BTU/H

DEHUMIDIFYING CAPACITY 38 pts per Day

COOLING POWER USAGE 760 Watts, 6.7 Amps

AIR FLOW VOLUME 200 CFM

POWER SOURCE 115 V / 60 HZ

SOUND PRESSURE LEVEL 46 dB(A)

PRODUCT WEIGHT 50 Lbs

OPERATING

TEMPERATURE 60.8℉-107.6℉

11.75” W × 13.75” D × 31” H

PRODUCT DIMENSIONS

REFRIGERANT R-410A

Portable Air Conditioner

Exhaust Hose (1)

Hose Adapter (1)

Window Kit Adapter (1)

Window Kit Adapter Extension (1)

Remote Control (1)

AAA Batteries (2)

Window Kit - 3 Sliding Panels (1 single hose panel, 2 extension panels)

Owner’s Manual (1)

LCDI POWER CORD AND PLUG

This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord

and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi-

ble cord with no termination on the load side and a LCDI attachment plug on the line side.

The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the

nominal current leakage between the cord shield and either load conductor exceeds a predetermined

value. The cord will remain de-energized until the devise has been manually reset. This is intended to re-

duce the risk of a fire in the power cord or combustible materials nearby. The cord shields are not grounded

and they must be considered a shock hazards if exposed. The cord shield must not be connected to ground

or to any exposed metal.

The test and reset buttons on the LCDI Plug are used to check if the plug is functioning properly. To test:

1. Plug power cord into wall outlet

2. Press TEST Button, circuit should trip, cutting power to the air conditioner

3. Press RESET button for use

If test button is pressed and unit can still be turned on, current leakage has been detected. Do not use the

air conditioner or attempt to reset the LCDI Plug. Contact Soleus Air Customer Service for troubleshooting

recommendations.

WARNING:

1. DO NOT press the TEST button while the air conditioner is operating.

2. The TEST and RESET buttons should not be used as “ON” and “OFF” switches.

3. The cord and plug are not intended to offer protection to externally connected loads or supply circuits.

4. The cord and plug are intended for indoor use only.

RESET

TEST

PRODUCT DIAGRAM

Casters

Louvers

Remote Control

Signal Receptor

Control Panel (on top)

Filter Compartment

Remote Control

Evaporator Air Intake

Condenser Air Outlet

Condenser Air Intake

Drain PortDrain Hole

Rubber Plug

PARTS & ASSEMBLY

PARTS

EXHAUST HOSE

WINDOW KIT

ASSEMBLY & INSTALLATION

INSTALLATION

When the unit is operating as an air conditioner or dehumidifier, the unit draws in fresh outdoor air and exhausts hot

air out of the room to complete the air exchange. When the unit is operating in fan mode no outdoor air exchange

takes place. The window kit and exhaust hose do not need to be installed when the unit is used as a fan.

NOTE: The supplied window kit can be installed in sliding windows and sliding glass doors up to 7 ft. long

(approximate length).

MOUNTING THE EXHAUST HOSE

 Choose a suitable location, near a grounded electrical outlet and suitable window or door. Remove

packaging and locate components.

 Extend both ends of the exhaust hose approximately 6 inches.

 Screw the window kit adapter onto one end of the exhaust hose counter-clockwise. Screw the hose

adapter onto the other end of the exhaust hose counter-clockwise.

 Slide the hose adapter of the exhaust hose down arrow over the discharge opening on the back of the

unit.

 Open the window or door and adjust the length of window kit to fit the opening. Then make the kit

fixed.

 Attach the window kit adapter of the exhaust hose to the window kit.

NOTE: The Portable Air Conditioner above may differ from the unit described in this manual. The above directions and im-

ages show general directions for Soleus Air hose portable air conditioners.

WINDOW KIT INSTALLATION

Optional Window Kit Adapter Extension (Included)

The Window Kit Adapter Extension is an optional part

that can be used on window sizes that require a longer

connection between the window and the exhaust hose.

WINDOW KIT ASSEMBLY

1.Parts:

A) 2 Track Screws

B) 2 Wing Nuts

C1 & C2) 2 Hose Panels, one Exhaust Hose Openings

D) 1 Sliding Track Panel

2. Assembly:

First, take the Track Screws (A) and screw one

into each of the small holes found on the Hose

Panels (C1 & C2).

3. Next, take the Wing Nuts (B) and tighten them

around each of the Track Screws (A). Do not tighten

the Wing Nuts (B) all the way; make sure they are

somewhat loose.

4. Now, place the Sliding Track Panel (D)

over the Track Screw (A) on Hose Panel (C1).

5. Next, take the other Hose Panel (C2) and connect

it to Hose Panel (C1) by placing the Sliding Track

Panel (D) over the Track Screw (A) on Hose Panel

(C2).

6. The Hose Panels (C1 &C2) should now be

connected using the Sliding Track Panel (D).

7. To complete the assembly, tighten the wing Nuts

(B) installed earlier. The finished Window Kit

should resemble the image seen below.

OPERATING INSTRUCTIONS

CONTROL PANEL BUTTONS

1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER

button once more to turn the unit off.

2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air

Conditioner, Dehumidifier, Fan only mode. Each press of the MODE button will light up a different

icon on the control panel. The exhaust hose and window kit must be installed when the unit is in Air

Conditioner, Dehumidifier mode. When using the unit as a fan, it is not necessary to keep the exhaust

hose and window kit connected to the unit.

3) Temperature - Select the desired temperature by pressing either - or + key when using the unit in

cooling mode. The temperature indicator flashes to display the desired temperature setting. After the

temperature is set, the unit will display this temperature setting until it is changed by the user. The tem-

perature indicator display shows temperature in Celsius or Fahrenheit. Press the - and + simultane-

ously to change between Celsius and Fahrenheit .

4) Bucket Full - when the unit can not evaporate the collected moisture fast enough. The excess water

will collect in a backup water tank located inside the unit. The bucket full icon will light up if this

occurs.

5) Louver Direction - This unit has 4-way directional louvers. Use the louver guides manually to direct

air where cooling or fanning is needed most.

POWER BUTTON

MODE BUTTON

TEMPERATURE AND TIMER

INDICATOR

BUCKET FULL

TIMER/TEMP DECREASE TIMER/TEMP INCREASE

AIR CONDITIONER MODE DEHUMIDIFIER MODE

FAN MODE

CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS

CONTROL PANEL

REMOTE CONTROL

TIMER ON

TIMER OFF

LCD DISPLAY

POWER BUTTON

MINUTE SELECTER

SLEEP BUTTON

HOUR SELECTER

TEMP SETTING

MODE BUTTON

FAN SPEED

OPERATING THE UNIT USING THE REMOTE CONTROL

* Remote Colors may differ from the

image above.

Inhaltsverzeichnis

Andere Soleus Air Klimaanlage Handbücher

Soleus Air

Soleus Air PSC-12HP-201 Bedienungsanleitung

Soleus Air

Soleus Air WCM1-08E-01 Bedienungsanleitung

Soleus Air

Soleus Air KY2-34 Bedienungsanleitung

Soleus Air

Soleus Air MAC-8000 Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-09ESE-26 Bedienungsanleitung

Soleus Air

Soleus Air FE-08BA Bedienungsanleitung

Soleus Air

Soleus Air KFR/KFS Series Bedienungsanleitung

Soleus Air

Soleus Air WM1-05M-01 Bedienungsanleitung

Soleus Air

Soleus Air SG-TTW-10ESE Bedienungsanleitung

Soleus Air

Soleus Air KFGHP-09-ID, KFGHP-09-OD, KFGH Technisches Datenblatt

Soleus Air

Soleus Air HCC-C09H26-A Bedienungsanleitung

Soleus Air

Soleus Air SG-PAC-10E2 Bedienungsanleitung

Soleus Air

Soleus Air PE1-09R-30 Bedienungsanleitung

Soleus Air

Soleus Air TM-PAC-08E3 Bedienungsanleitung

Soleus Air

Soleus Air PE4-11R-03 Bedienungsanleitung

Soleus Air

Soleus Air KFH-12/KFH-12-1 Bedienungsanleitung

Soleus Air

Soleus Air WS3-06E-201 Bedienungsanleitung

Soleus Air

Soleus Air SG-PTAC-09HPDA Bedienungsanleitung

Soleus Air

Soleus Air Mobile Comfort KY-80G Bedienungsanleitung

Soleus Air

Soleus Air 000/12 - BTU Multi-Room Heat/Cool Room Air... Bedienungsanleitung

Soleus Air

Soleus Air HCB-P11-A Bedienungsanleitung

Soleus Air

Soleus Air GM-TTW-10HC Bedienungsanleitung

Soleus Air

Soleus Air SG-WAC-06ESE Bedienungsanleitung

Soleus Air

Soleus Air LX-135DHP Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung