Sper scientific 300107 Bedienungsanleitung

FIXED-VOLUME PIPETTORS

300107 - 300116

Instruction Manual

SPER

SCIENTIFIC LTD.

- 2 -

TABLE OF CONTENTS

I. INTRODUCTION ............................................................................. 2

II. DESCRIPTION ............................................................................... 2

III. MEASUREMENT PROCEDURES .................................................. 3

IV. SPECIFICATIONS .......................................................................... 3

VII. WARRANTY.................................................................................... 4

I. INTRODUCTION

Your new air displacement pipettor is ergonomically designed, comfortable

to hold and easy to operate. High-end features include:

•Entire unit (and not the tip cone and tip ejector only) is chemically

resistant and fully autoclavable up to 8 times.

•Tip ejector

•Excellent accuracy

II. DESCRIPTION

Plunger

Tip Ejector

Handle

Suction Tube

Tip

- 3 -

III. MEASUREMENT PROCEDURES

1. Secure a pipette tip to the TIP of the unit.

2. Holding the unit vertically, depress the PLUNGER to the first stop. Next

fully immerse the TIP 2 to 4 mm into the solution.

3. Slowly release the PLUNGER until it returns to the original position.

4. Remove the unit from the solution after 1 to 2 seconds.

5. To discharge the solution from the pipette tip, place the TIP against the

inside wall of the receptacle. Depress the PLUNGER to the first stop,

then depress fully to completely blow out the solution from the TIP.

6. Next move the TIP up and along the inner wall of the receptacle several

times.

7. You may now remove the unit and release the PLUNGER.

8. Depress the TIP EJECTOR to remove the pipette tip.

9. Clean the unit using an autoclave or ultrasonic cleaner as required by

your application. The unit may be autoclaved for a maximum of 8 times,

after which, the unit should be discarded. Calibration remains stable

after occasional autoclaving. Annual recalibration by a professional

service center is recommended to ensure accuracy.

Note: Inserting objects into the top of the tip assembly can damage the

pipette seal.

Product

Number Range ( µl ) Accuracy (%) Repeatability (%)

300107 5 µl ± 4.00 <2.80

300108 10 µl ± 2.5 <1.00

300109 20 µl ± 2.0 <1.00

300110 25 µl ± 2.0 <1.00

300111 50 µl ± 2.0 <1.00

300112 100 µl ± 1.2 <0.50

300113 200 µl ± 1.0 <0.40

Specifications

300114 500 µl ± 1.0 <0.40

300115 1000 µl ± 1.0 <0.30

300116 5000 µl ± 0.8 <0.20

- 4 -

TWO YEAR WARRANTY

Sper Scientific warrants this product against defects in materials and

workmanship for a period of two years from the date of purchase, and

agrees to repair or replace any defective unit without charge. If your

model has since been discontinued, an equivalent Sper Scientific product

will be substituted if available. This warranty does not cover damage

resulting from accident, misuse, or abuse of the product. In order to obtain

warranty service, simply ship the unit postage prepaid to:

SPER SCIENTIFIC LTD.

7720 East Redfield, Suite 7

Scottsdale, Arizona 85260

(480) 948-4448

www.sperscientific.com

[email protected]

Please Note: The defective unit must be accompanied by a description of the

problem and your return address. Register online or return your warranty card

within 10 days of purchase.

Rev. 05/17/06

Check our website for updates.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 840018 Bedienungsanleitung

Sper scientific

Sper scientific 850081DOK Bedienungsanleitung

Sper scientific

Sper scientific 840020 Bedienungsanleitung

Sper scientific

Sper scientific 840018 Bedienungsanleitung

Sper scientific

Sper scientific 850020 Bedienungsanleitung

Sper scientific

Sper scientific 850023 Bedienungsanleitung

Sper scientific

Sper scientific 850004 Bedienungsanleitung

Sper scientific

Sper scientific 300003 Bedienungsanleitung

Sper scientific

Sper scientific 840081 Bedienungsanleitung

Sper scientific

Sper scientific 840021 Bedienungsanleitung

Sper scientific

Sper scientific 840024 Bedienungsanleitung

Sper scientific

Sper scientific 850050 Bedienungsanleitung

Sper scientific

Sper scientific 840080 Bedienungsanleitung

Sper scientific

Sper scientific 840023 Bedienungsanleitung

Sper scientific

Sper scientific 300005 Bedienungsanleitung

Sper scientific

Sper scientific 800015 Bedienungsanleitung

Sper scientific

Sper scientific 850026 Bedienungsanleitung

Sper scientific

Sper scientific 840005 Bedienungsanleitung

Sper scientific

Sper scientific 900030 Bedienungsanleitung

Sper scientific

Sper scientific 850048 Bedienungsanleitung

Sper scientific

Sper scientific 850001E Bedienungsanleitung

Sper scientific

Sper scientific 860032 Bedienungsanleitung

Sper scientific

Sper scientific 300068 Bedienungsanleitung

Sper scientific

Sper scientific 850006 Installations- und Benutzerhandbuch

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung