Sper scientific 840018 Bedienungsanleitung
- 2 -
CONTENTS
I. Introduction ................................... 2
II. Description .................................... 3
III. Operating Instructions................... 4
•Precautions and Maintenance .. 4
•Calibration.................................. 4-5
•Measurement ............................ 5-6
•Battery Replacement ................. 6
•Optional Accessories ................ 6
IV. Specifications ................................ 7
V. Warranty ....................................... 8
I. Introduction
Perfect for testing for OSHA requirements,
your new instrument meets ANSI S1.4
Type 2 and IEC61672-1 Class 2. Meas-
ures the 32~130 dB range in the "A" scale,
simulating the human ear response.
Features a built-in calibration adjustment,
fast response time, mini size, a resolution
of 0.1 dB, Max Hold, and a low battery
indicator. Designed to meet the
measurement requirements of safety engi-
neers, health, industrial safety offices and
sound quality control in various environ-
ments. Comes with instructions, wind-
screen, calibration tool, and two 1.5V
batteries. CE compliant.
www.ponpe.com
- 4 -
III. Operating Instructions
Precautions and Maintenance
•Do not store or operate the instrument at
high temperatures or humidity.
•Keep the microphone dry and avoid se-
vere shock or vibration.
•Wind blowing across the microphone can
cause measurement errors, these effects
are reduced by using the windscreen.
•Remove the batteries if the unit is not in
use for a long period of time.
•Wipe the case with a dry cloth, do not
use abrasives or solvents.
Calibration
Calibrate the meter before first use or
when the reading appears inaccurate.
If you require a certificate of calibration
traceable to NIST, the unit may be sent to
Sper Scientific for servicing (fee applies).
There are two methods of calibration:
1. Internal Electrical Calibration
•With the unit on, lightly press the
Battery Cover to slide it down and off.
•Move the Measurement Slide Switch
down. This activates the built-in
oscillator (94dB 1 kHz, sine wave) for
www.ponpe.com
- 5 -
electrical calibration of the unit.
•The LCD displays "CAL" for about 1
second. As needed, use the calibration
tool to adjust the Calibration (CAL) VR
until "94.0dB" is displayed.
•This ends the calibration. Make sure
that the Measurement Slide Switch is
returned to the "MEAS" (up) position
and the Battery Cover is reattached.
2. Acoustic calibration using a standard
sound calibrator such as Sper Scien-
tific's 840031.
•With the Measurement Slide Switch in
the "MEAS" (up) position, place the mi-
crophone in the calibrator.
•As needed, use the calibration tool to
adjust the Calibration (CAL) VR until
"94.0dB" is displayed.
Measurement
1. Press the Power / Max Hold button to
turn the meter on.
2. Point the Microphone at the noise
source.
3. The LCD displays the measured sound
level. Readings are updated twice
every second.
•"OVER" is displayed when the sound
www.ponpe.com
- 6 -
level is above 130dB.
•"UNDER" is displayed when the
sound level is below 32dB.
4. During the measurement procedure,
press the Power / Max Hold button to
freeze the measurement. "MAX" and
the measurement are displayed. When
the frozen sound level measurement is
exceeded, the new maximum
measurement will be displayed. Press
the Power / Max Hold button again to
exit this function.
5. To turn the unit off, press and hold the
Power /Max Hold button for 2 seconds.
Battery Replacement
Replace the battery when the low battery
icon is displayed. press the Battery Cover
to slide it down and off. Insert two 1.5V
batteries, paying attention to the polarity as
indicated in the compartment. Reattach
the cover.
Optional Accessories
840031 - Acoustical Calibrator
840091 - Wind Screen Replacement
www.ponpe.com
- 7 -
Range 32dB ~ 130dB
Resolution 0.1 dB
Accuracy ±1.5dB (under reference
conditions, 94dB@1kHz )
Frequency 31.5 Hz ~ 8 KHz in the "A"
weighting.
Time
Weighting FAST
Operating
Temperature 32~104°F (0~40°C)
Operating
Humidity 10 to 90%RH
Storage
Temperature 14~140°F (-10~60°C)
Storage
Humidity 10 to 75%RH
Display
Update 0.5 seconds
Microphone 1/2" electret
condenser microphone
Dimensions 8.1"L × 1.7"W × 1.0"H
206 × 42 × 25 mm
Weight 0.22 lbs, 100g
with batteries
Battery Life Approx. 20 hours
Alkaline
IV. SPECIFICATIONS
www.ponpe.com
- 8 -
Rev. 12/08/04
WARRANTY
Sper Scientific warrants this product
against defects in materials and
workmanship for a period of five (5)
years from the date of purchase, and
agrees to repair or replace any
defective unit without charge. If your
model has since been discontinued, an
equivalent Sper Scientific product will
be substituted if available. This
warranty does not cover damage
resulting from accident, misuse, or
abuse of the product. To obtain
warranty service, ship the unit postage
prepaid to:
SPER SCIENTIFIC LTD,
7720 E. Redfield Suite 7
Scottsdale, AZ 85260
WWW.SPERSCIENTIFIC.COM
Please Note: The defective unit must
be accompanied by a description of the
problem and your return address.
Register your product online or return
your warranty card within ten (10) days
of purchase.
www.ponpe.com
Inhaltsverzeichnis
Andere Sper scientific Messgerät Handbücher
Sper scientific
Sper scientific 800111 Bedienungsanleitung
Sper scientific
Sper scientific 840063 Bedienungsanleitung
Sper scientific
Sper scientific 800021 Bedienungsanleitung
Sper scientific
Sper scientific 840046 Bedienungsanleitung
Sper scientific
Sper scientific 860043 Bedienungsanleitung
Sper scientific
Sper scientific 850081 Bedienungsanleitung
Sper scientific
Sper scientific 800046 Bedienungsanleitung
Sper scientific
Sper scientific 840023 Bedienungsanleitung
Sper scientific
Sper scientific 850004 Bedienungsanleitung
Sper scientific
Sper scientific 840020 Bedienungsanleitung
Sper scientific
Sper scientific 840012 Bedienungsanleitung
Sper scientific
Sper scientific 800019 Bedienungsanleitung
Sper scientific
Sper scientific 800034 Bedienungsanleitung
Sper scientific
Sper scientific 840005 Bedienungsanleitung
Sper scientific
Sper scientific 850003 Bedienungsanleitung
Sper scientific
Sper scientific WBGT Bedienungsanleitung
Sper scientific
Sper scientific 300014 Bedienungsanleitung
Sper scientific
Sper scientific 840010 Bedienungsanleitung
Sper scientific
Sper scientific 850011 Bedienungsanleitung
Sper scientific
Sper scientific 850015 Bedienungsanleitung
