Sper scientific 850020 Bedienungsanleitung

1 1

Bluetooth®

Anemometer

850020

Instruction Manual

2 3

TABLE OF CONTENTS

INTRODUCTION..........................................3

PANEL DESCRIPTION................................4

MEASUREMENT PROCEDURES...............5

BACKLIGHT.................................................6

HOLD FUNCTION........................................6

MAX/MIN FUNCTION...................................6

AUTO POWER OFF.....................................7

BLUETOOTH COMMUNICATIONS.............8

BATTERY REPLACEMENT.......................11

SPECIFICATIONS......................................12

OPTIONAL ACCESSORIES......................13

WARRANTY...............................................16

2 3

INTRODUCTION

Sper Scientic’s Bluetooth® Anemometer

Meter is small, light, and simple to use.

Simultaneously displays air temperature in

°C or °F, and air velocity in 5 units of mea-

sure, on the meter’s large 1-½” high backlit

display. Features minimum and maximum

hold (peak), data hold and moving average

functions. The meter o󰀨ers the convenience

of Bluetooth® for wireless communication

with free iOS and Android Apps. Results can

also be remotely viewed on your smart-

phone in real time, saved and exported. This

enables the meter to be used as a remote

wireless probe and as a datalogger. Comes

ready to use with instructions, tripod screw,

and a 9V battery.

4 5

PANEL DESCRIPTION

1. Anemometer Vane

2. LCD Display

3. HOLD/ button

4. MAX/MIN button

5. Power button

6. Range selection

7. Bluetooth button

4 5

MEASUREMENT PROCEDURES

1. Turn the meter on/o󰀨 by pressing the

POWER button.

2. Airspeed will appear in large digits on the

lower display and temperature in smaller

digits on the upper display.

3. Hold the red button down for 2 seconds to

toggle between temperature readings in °C

and °F.

4. Press the red button to toggle between

m/s, ft/min, km/h, MPH, knots.

6 7

BACKLIGHT

Press for 2 seconds to turn the illuminated

display on/o󰀨.

HOLD FUNCTION

With the meter on, press the HOLD button to

display “HOLD” and the last reading. Press

HOLD again to exit this function.

MAX/MIN FUNCTION

Max/Min readings are continually updated as

soon as you enter the Max/Min mode. These

readings are reset when you exit the Max/ Min

mode, or when the meter is turned o󰀨.

1. Press the MAX/MIN button once to display

“MAX” and the maximum (peak) recorded

airow. The display will be updated only

when the max (peak) is exceeded.

6 7

2. Press the MAX/MIN button again to display

“MIN” and the minimum airow. The dis-

play will be updated only on reaching a

lower airow.

3. Press the MAX/MIN button again to view

a moving average of airow since you rst

entered Max/Min mode.

4. Press the MAX/MIN button again to exit

Max/Min mode. The current reading is now

displayed and continually updated.

AUTO POWER OFF

1. If no buttons are pushed for about 10 min-

utes, the meter will automatically turn o󰀨.

2. While the meter is on, press the power

button for 2 seconds to override Auto Power

O󰀨: disappears from the display indicat-

ing that Auto Power O󰀨 is disabled.

Note…The meter defaults to Auto Power O󰀨

each time it is turned on.

BLUETOOTH®COMMUNICATION

Download and pairing

1. Download the iOS or Android “Meterbox

Pro” APP to your smartphone.

2. Press the button on the meter to activate

Bluetooth®.

3. Press “Connect Device” on the APP.

4. Now choose “850020” from the device list

that now appears. The meter will immedi-

ately begin displaying a real time graph of

your meter’s readings.

Saving your results

5. To begin recording data press the red

button on screen. You will now be asked to

name and save the le. The data will now

start recording. Press the red button again

to stop recording.

Viewing saved Data

6. Press < at the top of the screen to view

saved data. Next, choose “Files” at the

bottom of the screen, then choose the le

you wish to view. A graph of the entire

record will now appear. Press on the

lower right to see the data including

recording times, maximum, minimum and

average readings.

7. (saved data le graph) enables you to

add notes and photos to your data le.

8. Press at the top of the screen to export

the data for to your computer for further

analysis or storage.

10 11

Settings

Alarms: Insert your Hi and Low values and

turn the alarm switch on.

Recording: Choose your test sample rate

and duration.

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850081DOK Bedienungsanleitung

Sper scientific

Sper scientific 850069 Bedienungsanleitung

Sper scientific

Sper scientific 300079 Bedienungsanleitung

Sper scientific

Sper scientific 850039 Bedienungsanleitung

Sper scientific

Sper scientific 300100 Bedienungsanleitung

Sper scientific

Sper scientific 850014 Bedienungsanleitung

Sper scientific

Sper scientific 300107 Bedienungsanleitung

Sper scientific

Sper scientific 840020 Bedienungsanleitung

Sper scientific

Sper scientific 300058 Bedienungsanleitung

Sper scientific

Sper scientific 840080 Bedienungsanleitung

Sper scientific

Sper scientific 300005 Bedienungsanleitung

Sper scientific

Sper scientific 850011 Bedienungsanleitung

Sper scientific

Sper scientific 850068 Bedienungsanleitung

Sper scientific

Sper scientific 850045 Bedienungsanleitung

Sper scientific

Sper scientific 850068 Bedienungsanleitung

Sper scientific

Sper scientific 850024 Bedienungsanleitung

Sper scientific

Sper scientific 800020 Bedienungsanleitung

Sper scientific

Sper scientific 800050 Bedienungsanleitung

Sper scientific

Sper scientific 840062 Bedienungsanleitung

Sper scientific

Sper scientific 800012 Bedienungsanleitung

Sper scientific

Sper scientific 840021 Bedienungsanleitung

Sper scientific

Sper scientific 850070 Bedienungsanleitung

Sper scientific

Sper scientific 850019 Bedienungsanleitung

Sper scientific

Sper scientific 850025 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung