Sper scientific 840046 Bedienungsanleitung

Microwave Meter

840046

Instruction Manual

- 2 -

Microwave Meter 840046

Printed in the USA

The contents of this manual may not be

reproduced or transmitted in any form or

by any means electronic, mechanical, or

other means that do not yet exist or may be

developed, including photocopying, recording,

or any information storage and retrieval

system without the express permission from

Sper Scientific.

- 3 -

TABLE OF CONTENTS

INTRODUCTION. . . . . . . . . . . . . . .

FEATURES . . . . . . . . . . . . . . . . . . .

MATERIALS SUPPLIED. . . . . . . . .

KEYPAD. . . . . . . . . . . . . . . . . . . . . .

MEASUREMENT PROCEDURES. .

BATTERY REPLACEMENT. . . . . . .

MAINTENANCE. . . . . . . . . . . . . . . .

OPTIONAL ACCESSORIES. . . . . .

SPECIFICATIONS. . . . . . . . . . . . . .

WARRANTY . . . . . . . . . . . . . . . . . .

- 4 -

INTRODUCTION

Measure hazardous microwave

oven leakage

With use microwave oven door

seals may wear enabling hazardous

microwaves to leak out. Sper Scientific

Microwave Meter is calibrated at

2.45 GHZ, the precise frequency of

microwave ovens to accurately

measure the intensity of such micro-

wave leakage. Features maximum

and minimum hold, an audible alarm,

and a zero adjustment to eliminate

background EMF. The display also

indicates overload and low battery.

Comes with a soft carrying case and

standard 9V battery, which provides

approximately 100 hours of use.

- 5 -

FEATURES

 Frequency selection of normal

or microwave range

 Tripod mounting socket

 Maximum and minimum

 Hold function

 Auto-power-off

 Built-in alarm

 Zero offset adjustment

 Overload indicator

 Low battery indicator

- 6 -

MATERIALS SUPPLIED

 Meter

 9 Volt Battery

 Instruction Manual

 Soft Carrying Case

- 7 -

KEYPAD

1. Sensor position

2. LCD

3. Zero button

4. Power on/off

5. Maximum/minimum button

6. Frequency range selection button

7. Data hold button

8. Tripod mounting socket

9. Battery cover

MEASUREMENT PROCEDURES

1. Press POWER to turn the meter on.

2. Press FREQ. RANGE to select

microwave (2.45 GHZ) or RF (50

MHZ to 3.5 GHZ). When 2.45 GHZ

is selected, “2450 MHZ” will appear

on the lower right corner of the LCD.

When normal range is selected,

“2450 MHZ” will disappear from the

lower right corner of the display.

3. For general information on

microwave oven leakage and

instructions on preparing for

microwave measurement,

see page 14.

4. Position the top of the meter to

measure the electromagnetic waves.

Adjust the measurement angle or

position until the highest reading

is obtained.

- 8 -

- 9 -

Measurement Position

Figure 1 shows the correct

measurement position of

RF electromagnetic field

strength.

Figure 2 shows the

incorrect measurement

positions of RF

electromagnetic field

strength.

MEASUREMENT PROCEDURES

Figure 1

Figure 2

- 10 -

Note…

Due to background environmental

magnetic fields, this meter may display

a reading value under 0.002 mW/cm2

prior to measuring.

Maximum, Minimum and Hold

1. Press MAX/MIN to retain the maxi-

mum value. “MAX” will appear on

the LCD. The meter will continue

measuring, holding the maximum

value on the LCD until exceeded.

2. Press MAX/MIN again to retain the

minimum value. “MIN” will appear

on the LCD. The meter will continue

measuring, holding the minimum

value on the LCD until exceeded.

3. Press MAX/MIN again to retain the

maximum and minimum values

simultaneously. “MAX MIN” will

MEASUREMENT PROCEDURES

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 840080 Bedienungsanleitung

Sper scientific

Sper scientific 850048 Bedienungsanleitung

Sper scientific

Sper scientific 300005 Bedienungsanleitung

Sper scientific

Sper scientific 800098 Bedienungsanleitung

Sper scientific

Sper scientific 850006 Installations- und Benutzerhandbuch

Sper scientific

Sper scientific 850001 Bedienungsanleitung

Sper scientific

Sper scientific 850020 Bedienungsanleitung

Sper scientific

Sper scientific 850039 Bedienungsanleitung

Sper scientific

Sper scientific 300068 Bedienungsanleitung

Sper scientific

Sper scientific 800020 Bedienungsanleitung

Sper scientific

Sper scientific AquaShock 850046K Bedienungsanleitung

Sper scientific

Sper scientific 300056 Bedienungsanleitung

Sper scientific

Sper scientific 850026 Bedienungsanleitung

Sper scientific

Sper scientific 840021 Bedienungsanleitung

Sper scientific

Sper scientific 840063 Bedienungsanleitung

Sper scientific

Sper scientific 840007 Bedienungsanleitung

Sper scientific

Sper scientific 860045 Bedienungsanleitung

Sper scientific

Sper scientific 300079 Bedienungsanleitung

Sper scientific

Sper scientific 850009 Bedienungsanleitung

Sper scientific

Sper scientific 300100 Bedienungsanleitung

Sper scientific

Sper scientific 840018 Bedienungsanleitung

Sper scientific

Sper scientific 850024 Bedienungsanleitung

Sper scientific

Sper scientific 850081 Bedienungsanleitung

Sper scientific

Sper scientific 800047 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung