Sper scientific 800019 Bedienungsanleitung

1 1

Bluetooth®

Hygrometer

800019

Instruction Manual

2 3

TABLE OF CONTENTS

INTRODUCTION..........................................3

PANEL DESCRIPTION................................4

MEASUREMENT PROCEDURES...............5

AC WEIGHTING SCALES...........................5

BACKLIGHT.................................................5

HOLD FUNCTION........................................5

MAX/MIN FUNCTION...................................6

AUTO POWER OFF.....................................7

BLUETOOTH COMMUNICATIONS.............8

BATTERY REPLACEMENT.......................11

SPECIFICATIONS......................................12

OPTIONAL ACCESSORIES......................13

WARRANTY...............................................16

2 3

INTRODUCTION

Sper Scientic’s Bluetooth® Hygrometer is

small, light, and simple to use. Displays

humidity, wet bulb, dew point and air

temperature in °C or °F on the meter’s

large 1-½” backlit display. Features a bar

graph display, minimum and maximum hold

(peak) and data hold functions. The meter

o󰀨ers the convenience of Bluetooth® for

wireless communication with free iOS and

Android smart phone Apps. Results can

also be remotely viewed on your smart-

phone in real time, saved and exported.

This enables the meter to be used as a

remote wireless probe and as a datalogger.

Comes ready to use with tripod screw,

instructions and a 9V battery. N.I.S.T.

traceable certicate of compliance available.

4 5

PANEL DESCRIPTION

1. Temperature/

RH Sensors

2. LCD Display

3. HOLD/ button

4. MAX/MIN button

5. Power button

6. Temp. Mode button

7. Bluetooth button

4 5

MEASUREMENT PROCEDURES

1. Turn the meter on/o󰀨 by pressing the

POWER button.

2. RH (Relative Humidity) will appear in large

digits on the lower display and temperature

in smaller digits on the upper display.

3. Hold the red button down for 2 seconds to

toggle between temperature readings in

°C and °F.

4. Press the red button to toggle between

WB (Wet Bulb), DP (Dew Point) and

ambient temperature.

BACKLIGHT

Press for 2 seconds to turn the illuminated

display on/o󰀨.

HOLD FUNCTION

With the meter on, press the HOLD button

6 7

to display “HOLD” and the last reading. Press

HOLD again to exit this function.

MAX/MIN FUNCTION

Max/Min readings are continually updated as

soon as you enter the Max/Min mode. These

readings are reset when you exit the Max/ Min

mode, or when the meter is turned o󰀨.

1. Press the MAX/MIN button once to display

“MAX” and the maximum (peak) recorded

RH and Temperature. The display will be

updated only when the max (peak) RH and

Temperature levels are exceeded.

2. Press the MAX/MIN button again to display

“MIN” and the minimum RH and Tempera-

ture. The display will be updated only on

reaching lower RH and Temperature read-

ings.

3. Press the MAX/MIN button again to exit

Max/Min mode. The current reading is now

displayed and continually updated.

6 7

AUTO POWER OFF

1. If no buttons are pushed for about 10 min-

utes, the meter will automatically turn o󰀨.

2. While the meter is on, press the power

button for 2 seconds to override Auto Power

O󰀨: disappears from the display indicat-

ing that Auto Power O󰀨 is disabled.

Note…The meter defaults to Auto Power O󰀨

each time it is turned on.

BLUETOOTH®COMMUNICATION

Download and pairing

1. Download the iOS or Android “Meterbox

Pro” APP to your smartphone.

2. Press the button on the meter to activate

Bluetooth®.

3. Press “Connect Device” on the APP.

4. Now choose “800019” from the device list

that now appears. The meter will immedi-

ately begin displaying a real time graph of

your meter’s readings.

Saving your results

5. To begin recording data press the red

button on screen. You will now be asked to

name and save the le. The data will now

start recording. Press the red button again

to stop recording.

Viewing saved Data

6. Press < at the top of the screen to view

saved data. Next, choose “Files” at the

bottom of the screen, then choose the le

you wish to view. A graph of the entire

record will now appear. Press on the

lower right to see the data including

recording times, maximum, minimum and

average readings.

7. (saved data le graph) enables you to

add notes and photos to your data le.

8. Press at the top of the screen to export

the data for to your computer for further

analysis or storage.

10 11

Settings

Alarms:

1. Select Instrument Type: Environmental

Meter.

2. Press Next then Choose Function and

select your alarm parameter.

3. Insert your Hi and Low alarm values.

4. Repeat steps 3 & 4 for additional alarm

parameters you wish to set for your meter.

5. Use the Alarm switch at the bottom to

enable / disable the alarm for the parameter

shown. Use the Allow Alarm switch at the

top to enable / disable alarms on all

parameters.

Recording: Choose your test sample rate

and duration.

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 900019 Bedienungsanleitung

Sper scientific

Sper scientific 840015 Bedienungsanleitung

Sper scientific

Sper scientific 840063 Bedienungsanleitung

Sper scientific

Sper scientific AquaShock 850046K Bedienungsanleitung

Sper scientific

Sper scientific 840024 Bedienungsanleitung

Sper scientific

Sper scientific 800015 Bedienungsanleitung

Sper scientific

Sper scientific 850045 Bedienungsanleitung

Sper scientific

Sper scientific 840087 Bedienungsanleitung

Sper scientific

Sper scientific 850081 Bedienungsanleitung

Sper scientific

Sper scientific 850025 Bedienungsanleitung

Sper scientific

Sper scientific 840021 Bedienungsanleitung

Sper scientific

Sper scientific 860043 Bedienungsanleitung

Sper scientific

Sper scientific 850009 Bedienungsanleitung

Sper scientific

Sper scientific 300001 Bedienungsanleitung

Sper scientific

Sper scientific 850070 Bedienungsanleitung

Sper scientific

Sper scientific 300005 Bedienungsanleitung

Sper scientific

Sper scientific 850003 Bedienungsanleitung

Sper scientific

Sper scientific 300107 Bedienungsanleitung

Sper scientific

Sper scientific 300037 Bedienungsanleitung

Sper scientific

Sper scientific 850050 Bedienungsanleitung

Sper scientific

Sper scientific 840012 Bedienungsanleitung

Sper scientific

Sper scientific 300100 Bedienungsanleitung

Sper scientific

Sper scientific 850015 Bedienungsanleitung

Sper scientific

Sper scientific Large Display Salinity Pen - 850036 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung