Sper scientific 850081 Bedienungsanleitung

Water Quality Meter

850081

Water Quality Meter Kit

850086

Instruction Manual

2 3

Water Quality Meter - 850081

Water Quality Meter Kit - 850086

Printed in the USA

The contents of this manual may not be reproduced

or transmitted in any form or by any means electronic,

mechanical, or other means that do not yet exist or may

be developed, including photocopying, recording, or any

information storage and retrieval system without the express

permission from Sper Scientic.

SPER SCIENTIFIC LTD.

8281 E. Evans Rd., Suite #103

Scottsdale, AZ 85260

(480) 948-4448

INTRODUCTION ................................ 4

FEATURES ..................................... 5

MATERIALS SUPPLIED ........................... 5

FRONT PANEL DESCRIPTION ..................... 6

SETUP ........................................ 7

MEASURMENT FUNCTIONS ......................11

pH MEASUREMENTS ........................... 12

DO MEASUREMENTS........................... 15

CONDUCTIVITY MEASUREMENTS ................ 17

SOFTWARE DOWNLOAD ........................ 21

RS232 PC SERIAL INTERFACE ................... 22

SPECIFICATIONS .............................. 25

PROBES ..................................... 25

WARRANTY................................... 28

TABLE OF CONTENTS

4 5

INTRODUCTION

This Sper Scientic Water Quality Meter (Model 850081)

uses optional, interchangeable probes to read pH, millivolt

(mV)/ oxygen reduction potential (ORP), conductivity, total

dissolved solids (TDS), salinity, dissolved oxygen (DO) and

temperature with optional probes. Order only the probes

required for your current parameters and add additional

probes in the future.

All probes are optional and not included with the meter.

The meter automatically recognizes pH bu󰀨ers 4, 7 and 10

for simple calibration. Other features include readings in

°C or °F, automatic temperature compensation (ATC) and

salinity and altitude compensation for DO measurements.

An RS232 port enables communication with a computer.

Additional features include automatic shuto󰀨, minimum

and maximum values, a fold-out easel back and a tripod

mounting screw.

FEATURES

• Reads pH, mV/ORP, conductivity, TDS, salinity, DO and

temperature with optional probes

• Automatic temperature compensation

• Automatic calibration recognition of pH bu󰀨ers

• Salinity and altitude compensation for DO measurements

• Maximum and minimum values

• Hold function

• Temperature units in °C or °F

• RS232 PC serial interface

• Battery or optional DC 9V power adapter

• Tripod mounting screw

• Automatic shuto󰀨

• Backlight

MATERIALS SUPPLIED

• Water Quality Meter

• Instruction Manual

• DC 9V Battery

• Hard Carrying Case

6 7

1. LCD Display

2. Power/Backlight Button

3. Hold/Escape Button

4. Record Button

5. ▲/Range Button

6. ▼/Function Button

7. Set Button

8. Enter Button

9. Easel Stand

10. Battery Compartment

Cover

11. Battery Compartment

Cover Screw

12. Tripod Mounting Screw

13. Temperature Probe

Socket

14. Dissolved Oxygen

Probe Socket

15. Conductivity Probe Socket

16. pH Probe/BNC Socket

17. DC 9V Power

Adapter Socket

18. Reset Button

19. RS232 Output Terminal

5. 6.

7. 8.

10.

11.

12.

13.

14.15.

16.

17.

18.

19.

FRONT PANEL DESCRIPTION

SETUP

Meter On and O󰀨

1. Press POWER to turn the meter on.

2. Press and hold POWER for 3 seconds and release to turn

the meter o󰀨.

Backlight

The backlight will illuminate automatically when the meter is

turned on.

1. Press the backlight button to turn the backlight o󰀨.

2. Press the backlight button again to turn the backlight on.

Entering Setup Mode

1. Press POWER to turn the meter on.

2. Press SET for two seconds to enter Setup Mode.

3. Press SET to cycle through the options until the desired

parameter is displayed.

4. Press ESC at any time to exit Setup Mode.

Automatic Shuto󰀨

1. In Setup Mode, press SET until “PoFF” is displayed.

2. Press ▲ or ▼ to toggle between “Yes” (automatic shuto󰀨

is on) or “No” (disable automatic shuto󰀨).

3. Press ENTER to save the selection.

4. Press SET to continue to the next setup parameter, or

press ESC to exit Setup Mode.

8 9

Beeper

1. In Setup Mode, press SET until “bEEP” is displayed.

2. Press ▲ or ▼ to toggle between “Yes” (beeper is on) or

“No” (disable beeper).

3. Press ENTER to save the selection.

4. Press SET to continue to the next setup parameter, or

press ESC to exit Setup Mode.

Select Temperature Units

1. In Setup Mode, press SET until “t-CF” is displayed.

2. Press ▲ or ▼ to toggle between °C or °F.

3. Press ENTER to save the selection.

4. Press SET to continue to the next setup parameter, or

press ESC to exit Setup Mode.

Select DO Salinity Compensation

This feature is active in DO Mode only.

1. In Setup Mode, press SET until “SALt” is displayed.

2. The default value is 0%. Press ▲ or ▼ to adjust the upper

salinity compensation value.

3. Press ENTER to save the selection.

4. Press SET to continue to the next setup parameter, or

press ESC to exit Setup Mode.

Select DO Altitude Compensation in Meters

This feature is active in DO Mode only.

1. In Setup Mode, press SET until “HIGh” is displayed.

2. The default value is 0 meters. Press ▲ or ▼ to adjust

the upper altitude compensation value in increments of

100 meters.

3. Press ENTER to save the selection.

4. Press SET to continue to the next setup parameter, or

press ESC to exit Setup Mode.

Select DO Altitude Compensation in Feet

This feature is active in DO Mode only.

1. In Setup Mode, press SET until “HIGhF” is displayed.

2. The default value is 0 feet. Press ▲ or ▼ to adjust the upper

altitude compensation value in increments of 100 feet.

3. Press ENTER to save the selection.

4. Press SET to continue to the next setup parameter, or

press ESC to exit Setup Mode.

Select Conductivity Temperature Compensation Value

This feature is active in Conductivity Mode only.

1. In Setup Mode, press SET until “PEr C” is displayed.

2. The default value is 2% per ° C. Press ▲ or ▼ to adjust

the upper temperature compensation value.

3. Press ENTER to save the selection.

4. Press ESC to exit Setup Mode.

10 11

Select pH Manual Temperature Compensation Value

This feature is active in pH Mode only.

1. In Setup Mode, press SET until “t-SEt” is displayed.

2. The default value is 25° C / 77° F. Press ▲ or ▼ to adjust

temperature compensation value.

3. Press ENTER to save the selection.

4. Press ESC to exit Setup Mode.

System Reset

If the meter appears unresponsive or pressing the keys

produces no result, reset the system:

1. With the meter on, open the cover on the side of the meter.

2. Use a pin or the end of a paperclip to press RESET.

Andere Handbücher für 850081

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850003 Bedienungsanleitung

Sper scientific

Sper scientific 800020 Bedienungsanleitung

Sper scientific

Sper scientific 300068 Bedienungsanleitung

Sper scientific

Sper scientific 840081 Bedienungsanleitung

Sper scientific

Sper scientific 840045 Bedienungsanleitung

Sper scientific

Sper scientific 840020 Bedienungsanleitung

Sper scientific

Sper scientific AquaShock 850046K Bedienungsanleitung

Sper scientific

Sper scientific 800111 Bedienungsanleitung

Sper scientific

Sper scientific 840060 Bedienungsanleitung

Sper scientific

Sper scientific 300003 Bedienungsanleitung

Sper scientific

Sper scientific 850081DOK Bedienungsanleitung

Sper scientific

Sper scientific 800021 Bedienungsanleitung

Sper scientific

Sper scientific 850009 Bedienungsanleitung

Sper scientific

Sper scientific 300014 Bedienungsanleitung

Sper scientific

Sper scientific 850001 Bedienungsanleitung

Sper scientific

Sper scientific 800050 Bedienungsanleitung

Sper scientific

Sper scientific 840020 Bedienungsanleitung

Sper scientific

Sper scientific 800015 Bedienungsanleitung

Sper scientific

Sper scientific 850051 Bedienungsanleitung

Sper scientific

Sper scientific 850071 Bedienungsanleitung

Sper scientific

Sper scientific 840021 Bedienungsanleitung

Sper scientific

Sper scientific 850069 Bedienungsanleitung

Sper scientific

Sper scientific 850045 Bedienungsanleitung

Sper scientific

Sper scientific 800046 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung