Sper scientific 850001 Bedienungsanleitung

Pocket Moisture Meter

850001

Instruction Manual

TABLE OF CONTENTS

INTRODUCTION............................................ 3

FEATURES .................................................... 4

MATERIALS SUPPLIED ................................ 4

FRONT PANEL DESCRIPTION .................... 5

LCD DISPLAY ................................................ 6

SET UP .......................................................... 7

CALIBRATION ............................................. 10

MEASUREMENT PROCEDURES .............. 12

CARE AND MAINTENANCE ....................... 18

SPECIFICATIONS ....................................... 19

WARRANTY ................................................ 20

INTRODUCTION

This Sper Scientic Pocket Moisture Meter

(model 850001) displays the moisture content

on a large backlit LCD screen. This meter

combines the versatility of measuring many

di󰀨erent materials with the peace of mind

of an in-cap calibration check. The meter

simultaneously displays the moisture content

in multiple formats including percentage, low

and high, and a convenient bar graph that can

be seen at a distance. The meter’s pins are

minimally invasive to surfaces while still having

the strength to penetrate a variety of materials

including hardwoods, brick, and concrete.

FEATURES

• Reads 7 di󰀨erent building materials

• Minimally invasive penetration pins

• Rugged housing

• Hold button for maintaining readings

• Maximum and minimum values

• Backlight

• In-cap calibration check

• LCD that can withstand freezing temperatures

• Reads ambient temperature in °C or °F

• Reads ambient humidity and dew point

• Automatically calculates wet bulb value

MATERIALS SUPPLIED

• Pocket moisture meter

• Calibration cap

• Soft carrying case

• Instruction manual

• Two AAA batteries

FRONT PANEL DESCRIPTION

1. Calibration Sensors on top of cap

2. Calibrating Cap/protective cover

3. Power Button

4. Unit Selector

5. Backlight Button

6. Data Hold Button

7. Material Selector

8. Maximum/Minimum Button

9. Enter Button

1. Ambient Air Temperature

2. Temperature Units

3. Ambient Air Moisture

4. Moisture Units

5. Material Selected

6. Maximum and Minimum Values

7. Material Moisture Reading

8. Material Moisture Bar Graph

9. Data Hold Indicator

10. Low-Battery Icon

LCD DISPLAY

1 2 3 4

SET UP

Battery Installation

This meter uses two AAA batteries. To install

the batteries before rst use:

1. Unscrew the single screw in the center of the

back of the meter. This screw secures the

battery cover.

2. Remove the battery door by inverting the

meter and allowing the door to slide out.

3. Insert two new AAA batteries, ensuring

correct polarity.

4. Replace the battery cover and reinstall

the screw.

Replace the batteries when the low-battery icon

blinks on the LCD.

Note…

Before replacing the batteries, turn the meter o󰀨.

Meter On and O󰀨

1. Press POWER to turn the meter on.

2. Press POWER to turn the meter o󰀨.

3. The meter will automatically turn o󰀨 after ten

minutes of inactivity.

Backlight

1. Press the backlight button to illuminate the

LCD screen.

2. The backlight will shut o󰀨 automatically when

the power is turned o󰀨.

Select Ambient Air Units

IMPORTANT:

The temperature and humidity readings represent

the temperature and humidity of the surrounding

air and do NOT represent the temperature or

humidity of the material being tested.

1. Press UNIT to toggle through temperature

and humidity unit options. The meter will

toggle through temperature settings rst

(°C or °F) followed by the humidity options

of Relative Humidity, Wet Bulb, and Dew

Point (%, WB, and TD).

2. Once the desired unit of measure appears

on the screen, press ENTER to select it. The

meter will return to normal measuring mode.

3. Press UNIT again to toggle to your preferred

humidity unit. Press ENTER to select it. The

meter will return to normal measuring mode.

4. The unit will remember your choice of

temperature units after turning o󰀨.

CALIBRATION

Check the meter periodically using its included

calibration cap. The meter can be checked before

each use or when switching between materials.

1. Turn the meter on and

ensure it is set to Material 1.

2. Remove the protective

cap and turn it upside

down to expose the

calibration sensors. See

image to the right.

3. Wipe pins with a cloth and

remove all debris.

4. Place the pins into the cap’s

calibration sensors. Wait up

to ten seconds. The meter

will display the number 35%

once calibration is complete.

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850019 Bedienungsanleitung

Sper scientific

Sper scientific 850069 Bedienungsanleitung

Sper scientific

Sper scientific 840007 Bedienungsanleitung

Sper scientific

Sper scientific 800098 Bedienungsanleitung

Sper scientific

Sper scientific 850071 Bedienungsanleitung

Sper scientific

Sper scientific 840064 Bedienungsanleitung

Sper scientific

Sper scientific 840060 Bedienungsanleitung

Sper scientific

Sper scientific 800046 Bedienungsanleitung

Sper scientific

Sper scientific 860043 Bedienungsanleitung

Sper scientific

Sper scientific 800034 Bedienungsanleitung

Sper scientific

Sper scientific 850048 Bedienungsanleitung

Sper scientific

Sper scientific 840029 Bedienungsanleitung

Sper scientific

Sper scientific 840063 Bedienungsanleitung

Sper scientific

Sper scientific 800021 Bedienungsanleitung

Sper scientific

Sper scientific 800058 Bedienungsanleitung

Sper scientific

Sper scientific 840018 Bedienungsanleitung

Sper scientific

Sper scientific 300068 Bedienungsanleitung

Sper scientific

Sper scientific 800015 Bedienungsanleitung

Sper scientific

Sper scientific 850025 Bedienungsanleitung

Sper scientific

Sper scientific CL-2006 Bedienungsanleitung

Sper scientific

Sper scientific 300014 Bedienungsanleitung

Sper scientific

Sper scientific 840006 Bedienungsanleitung

Sper scientific

Sper scientific 840045 Bedienungsanleitung

Sper scientific

Sper scientific 860055 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung