Sper scientific AquaShock Bluetooth pH Kit 850057K Bedienungsanleitung

AquaShock®

Bluetooth®

pH Kit

850057K

2 3

AquaShock® Bluetooth® pH Kit 850057K

Printed in the USA

The contents of this manual may not be reproduced or transmitted

in any form or by any means electronic, mechanical, or other

means that do not yet exist or may be developed, including

photocopying, recording, or any information storage and retrieval

system without the express permission from Sper Scientic.

EPA Equivalency Method (with Glass Probe): 150.1

FCC ID: 2AK5U-1300

This device and enclosed comply with part 15 of the FCC Rules.

Operation is subject to the two following conditions: (1) this device

may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may

cause undesired operation.

Sper Scientic

8281 E. Evans Rd., Suite #103, Scottsdale, AZ 85260

Tel: (480) 948-4448

Fax: (480) 967-8736

Web: www.sperscientic.com

INTRODUCTION .....................................4

FEATURES..........................................5

MATERIALS SUPPLIED................................5

LCD DISPLAY .......................................6

POWER SUPPLY .....................................7

KEYPAD ............................................8

SETUP MODE .......................................9

CALIBRATION ......................................11

MEASUREMENT PROCEDURES .......................12

BLUETOOTH®DATALOGGING .........................14

OPTIONAL ACCESSORIES ...........................14

SPECIFICATIONS ...................................15

WARRANTY .......................................16

TABLE OF CONTENTS

4 5

INTRODUCTION

This Sper Scientic AquaShock® Bluetooth® pH Meter

(850057K) is the industry’s leading cross-over meter that

brings lab quality capability to the portable meter industry. The

AquaShock® line can withstand rigorous use, oats, and can

be completely submerged in up to a meter of water. The fast

calibration calibrates up to ve-points with auto-recognition

technology. Data can be stored in the meter and later streamed

to the included software for graphing, manipulation, and sharing

via Bluetooth® technology. It can also stream in real-time

allowing users to wirelessly collect data from up to 100 feet away.

Data gathered with the AquaShock® is precise, fast, and secure

making it possible for the same meter to be used in multiple

applications including laboratory settings, manufacturing, and

environmental testing.

FEATURES

• Floats

• Shockproof

• IP67 Waterproof

• Bluetooth® streaming up to 100 feet

• Protective soft grip outer layer

• Rechargeable Lithium Ion battery

• Also accepts standard BNC probes

(Waterproof seal is compromised with non-AquaShock® probes)

• Multi-line display LCD screen

• Reads pH and mV

• Automatic or manual temperature compensation

• Automatic bu󰀨er recognition

• Celsius or Fahrenheit selectable

• 99 data points for analysis

• Calibration point review

• Internal clock and calendar

• Maximum, minimum and average

• Hold function

• Low battery indicator

• Backlight

MATERIALS SUPPLIED

• Meter

• Bluetooth® Dongle

• Dual pH/ATC Probe

• pH Bu󰀨ers, Distilled Water

• 1 Lithium 1450 mAh 7.4 V Battery

• DC Power Adapter

• Instruction Manual

• Hard Carrying Case

Name Description

1 Ready Displayed when measuring

results are stable

2 Electrode

Durability Icon

Current electrode durability

3 Scale Unit Current measurement scale unit

4 Measuring Results Current measurement value

5 ATC/MTC Automatic/Manual Temperature

Compensation indicator

6Temperature Scale Current temperature

measurement unit

7 Temperature Value Current temperature

measurement value

8 Battery Icon Current battery power level

LCD DISPLAY

Battery voltage is more than 7.7V shows full.

Battery Power Icon:

Battery voltage between 7.2V and 7.7V shows 2 cells.

Battery voltage between 6.6V and 7.2V shows 1 cell.

Battery voltage less than 6.6V shows 0 cells and ashes.

Display showing battery charging from

less than 6.6V to fully charged.

More than 90% life remaining

More than 85–90% life remaining

More than 80-85% life remaining

Less than 80% life remaining

Probe Life Icon:

LCD DISPLAY

POWER SUPPLY

This meter is powered by one rechargeable Lithium 7.4V (1450

mAh) battery. The DC power adapter can be used to charge the

battery even when the meter is turned o󰀨. This meter includes a

charge protection function and will automatically stop charging

when the battery is full. A complete re-charge takes approximately

8 hours.

8 9

Name 1st Function 2nd Function

1Power/Backlight/

Low Battery

Power on/o󰀨 Backlight on/o󰀨

2 Setup Setting parameters Conrm setting

3MI↑ Store data ↑

4MR↓ Recall data ↓

5Max/Min/Ave Max/Min/Ave

6Range/Temp Switch measuring

scale

Set temperature value

7Hold/Exit Hold Exit

8CAL Calibration

KEYPAD

SETUP MODE

The Setup Mode allows you to customize the following

meter preferences and defaults:

• Temperature Units

• Clock Setting

• Restore Factory Defaults

• View Calibration Data

• View Probe Parameters

1. Press POWER for 1 second to turn the meter on before

performing any setup function.

Temperature Units

1. Press SETUP to enter the Setup Mode.

2. Press SETUP to enter the Set Temperature screen.

3. The unit °C or °F will ash on the LCD.

4. Press ↑or ↓ to select the °C or °F temperature unit.

5. Press SETUP to save and return to Normal Mode.

6. Press EXIT to return to Normal Mode without saving the selection.

Real Time Clock

1. Press SETUP to enter the Setup Mode.

2. Press ↑or ↓ to select the Set Clock screen.

3. Press SETUP to set the year. The value will ash on the LCD.

4. Press ↑ to increase the value by 1. Hold down ↑

to continually increase the value.

Press ↓ to decrease the value by 1. Hold down ↓

to continually decrease the value.

Press SETUP to save and the meter automatically

moves to the month setting.

5. Repeat step 4 to adjust the month, day, hour, and minute.

6. Press EXIT to return to Normal Mode without saving.

Note...

This procedure adjusts the meter’s internal clock. The internal

clock will function when the meter is turned o󰀨 but only when the

battery is installed.

10 11

Restore Factory Settings

1. Press SETUP to enter the Setup Mode.

2. Press ↑or ↓ to select the Restore Factory Settings screen.

3. Press SETUP to conrm selection. “NO” will ash on the LCD.

4. Press ↑or ↓ to select “YES” or “NO.”

5. When “YES” is displayed, press SETUP to conrm and all

parameters will restore to factory settings (except the clock)

and the meter returns to Normal Mode.

6. Press EXIT to return to Normal Mode without saving.

View Calibration Data

1. Press SETUP to enter the Setup Mode.

2. Press ↑or ↓ to select the View CAL Data screen.

3. Press SETUP to enter the mode.

4. Press ↓ to view the previous calibration point. Press ↑to

view the next calibration point. The date and time is on

cyclical display.

5. Press EXIT to return to Normal Mode.

View Probe Parameters

1. Press SETUP to enter

the Setup Mode.

2. Press ↑or ↓to select the View

Probe Parameters screen.

Note...

If the meter is not calibrated, the screen will show:

Press SETUP or EXIT to

return to Normal Mode.

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850007 Bedienungsanleitung

Sper scientific

Sper scientific 850023 Bedienungsanleitung

Sper scientific

Sper scientific 300100 Bedienungsanleitung

Sper scientific

Sper scientific 300003 Bedienungsanleitung

Sper scientific

Sper scientific 840021 Bedienungsanleitung

Sper scientific

Sper scientific 850097 Bedienungsanleitung

Sper scientific

Sper scientific 850024 Bedienungsanleitung

Sper scientific

Sper scientific 850081 Bedienungsanleitung

Sper scientific

Sper scientific AquaShock 850034K Bedienungsanleitung

Sper scientific

Sper scientific 850081DOK Bedienungsanleitung

Sper scientific

Sper scientific 840020 Bedienungsanleitung

Sper scientific

Sper scientific Large Display Salinity Pen - 850036 Bedienungsanleitung

Sper scientific

Sper scientific 840021 Bedienungsanleitung

Sper scientific

Sper scientific 840062 Bedienungsanleitung

Sper scientific

Sper scientific 300079 Bedienungsanleitung

Sper scientific

Sper scientific 840024 Bedienungsanleitung

Sper scientific

Sper scientific 800098 Bedienungsanleitung

Sper scientific

Sper scientific 840063 Bedienungsanleitung

Sper scientific

Sper scientific 860041 Bedienungsanleitung

Sper scientific

Sper scientific 850015 Bedienungsanleitung

Sper scientific

Sper scientific 800047 Bedienungsanleitung

Sper scientific

Sper scientific DS-2013SD Bedienungsanleitung

Sper scientific

Sper scientific 800015 Bedienungsanleitung

Sper scientific

Sper scientific 850009 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung