Sper scientific WBGT Bedienungsanleitung

WBGT Heat Stress Meter

800036

WBGT Heat Stress Meter - 800036

The contents of this manual may not be reproduced

or transmitted in any form or by any means electronic,

mechanical, or other means that do not yet exist or may

be developed, including photocopying, recording, or any

information storage and retrieval system without the express

permission from Sper Scientic.

HEAT STRESS REFERENCES:

Refer to any of the following organizations for

current and reliable data regarding heat stress

threshold recommendations and guidelines.

• American Conference of Governmental Industrial

Hygienists (www.acgih.org).

• American Industrial Hygiene Association

(www.aiha.org).

• Canadian Centre for Occupational Health & Safety

(www.ccohs.ca).

• Environmental Protection Agency (www.epa.gov).

• International Organization for Standardization

(www.iso.org).

• National Climatic Data Center (www.ncdc.noaa.gov).

TABLE OF CONTENTS

INTRODUCTION. . . . . . . . . . . . . . . . 4

FEATURES. . . . . . . . . . . . . . . . . . . 5

MATERIAL SUPPLIED . . . . . . . . . . . . . 5

UNIT DESCRIPTION. . . . . . . . . . . . . . 6

KEYPAD . . . . . . . . . . . . . . . . . . . . 7

LCD DISPLAY . . . . . . . . . . . . . . . . . 8

FUNCTION SELECTIONS . . . . . . . . . . . 9

Display Mode Selection . . . . . . . . . . . 9

Heat Index Measurement . . . . . . . . . 10

Non-Sleep Mode Selection. . . . . . . . . 10

Alarm Threshold Selection . . . . . . . . . .11

Data Analysis. . . . . . . . . . . . . . . . 12

BATTERY REPLACEMENT . . . . . . . . . 13

TROUBLESHOOTING . . . . . . . . . . . . 13

ERROR CODES . . . . . . . . . . . . . . . 14

SPECIFICATIONS . . . . . . . . . . . . . . 15

WARRANTY . . . . . . . . . . . . . . . . . 16

INTRODUCTION

The Sper Scientic WBGT (Wet Bulb Globe

Temperature) Heat Stress Meter (Model 800036) is

light-weight, portable, and provides the most accurate

determination of the heat stress index based on the

cumulative e󰀨ect of air temperature, air movement,

relative humidity, and radiant heat.

The WBGT Heat Stress Meter provides highly accurate

readings with a typical response time of only 15

seconds. The WBGT Heat Stress Meter provides

settings for both indoor and outdoor activities, and

includes an audible alarm that is adjustable to your

WBGT threshold.

You can use the WBGT Heat Stress Meter almost

anywhere to determine appropriate exposure levels

to high temperatures and avoid heat exhaustion

during athletic events, military exercises, and

industrial activities.

This WBGT Heat Stress Meter comes fully calibrated

from our manufacturing facility, and should maintain

it’s calibration.

FEATURES

• Light-weight, Portable, and Accurate—Provides

accurate readings with a typical response time

of only 15 seconds, and settings for both

indoor/outdoor activities.

• Threshold Alarm—An audible alarm that is adjustable

to your WBGT threshold.

• Long-Life Battery Operation—An expected battery

life of more than 1000 hours (alkaline) and 250 hours

(general purpose).

• Tripod Mountable—A tripod screw mount for hands-

free monitoring.

• Data Analysis—USB port to connect with a PC for

real-time data analysis. USB cable and data software

sold separately.

MATERIALS SUPPLIED

Meter

Batteries

Instruction Manual

Black Ball Sensor Shell

Sensor

Sensor Cover

Sensor Housing Screws (front

and back of unit)

Tripod Screw (back of unit)

LCD Display

Power/Set, Mode and

Next Buttons

USB Port (side of unit)

Battery Compartment

(back of unit)

UNIT DESCRIPTION

KEY PAD

Press the SET button to turn on/

o󰀨 the unit and to enter the alarm

setting mode.

Press the NEXT button to select a

digit in the alarm setting mode

and to exit the setting mode

when complete.

Press the MODE button to change

the display mode, to select the

environment mode (IN/OUT), and

to change the values when setting

the alarm mode.

Press the SET and MODE button

simultaneously to select Non-Sleep

mode and prevent the unit from

turning o󰀨 automatically.

Press the NEXT and MODE button

simultaneously to select between

°C & °F temperature scales.

LCD DISPLAY

WBGT - Wet Bulb

Globe Temperature

A composite temperature

used to estimate the e󰀨ect

of temperature, humidity,

wind chill, and solar

radiation on humans.

TG - Black Globe Temperature

Temperature as measured by a black globe thermometer,

which monitors the e󰀨ects of direct solar radiation on an

exposed surface. This temperature is analogous to what

you feel when standing in the sun.

TA - Air Temperature (Ta)

The standard temperature as normally referenced in

weather observations and forecasts.

% - Relative Humidity

The percentage of water vapor in the air.

IN/OUT - Indoor/Outdoor

Environment with or without direct sun exposure using

the following equations:

Indoor/Outdoor (No Sun): WBGT=0.7 WB + 0.3 TG

Outdoor (Full Sun): WBGT=0.7 WB + 0.2 TG + 0.1 TA

C/F - Celsius/Fahrenheit

Ambient temperature in either Celsius or Fahrenheit.

- Low Battery Indicator

The low battery icon indicates that you must replace

the batteries.

DP/REC/888 - Unused

These indicators are reserved for use in future models.

Please disregard.

FUNCTION SELECTIONS

This WBGT Heat Stress Meter comes fully calibrated

from our manufacturing facility, and should maintain

it’s calibration.

Display Mode Selection

1. Turn on the meter by pressing the SET button.

The LCD display turns on and the meter enters

measuring mode.

2. Short press the MODE button to select the RH,

WBGT, TA, and TG modes, respectively.

3. Press and hold the MODE button, to select either

IN (for indoor measurements) or OUT (for outdoor

measurements). Each time you press and hold the

MODE button, the LCD display switches between

IN and OUT.

4. When reading temperature, press the MODE

and NEXT buttons simultaneously to select

between a Celsius (C°) and Fahrenheit (F°)

temperature reading.

Heat Index Measurement

1. Turn on the meter by pressing the SET button. The

LCD display turns on and enters measuring mode.

2. Slide down the sensor protective cover. The LCD

displays the value for the selected display mode

within 15 seconds.

3. When you have completed your readings, slide the

cover back up to its protective position and press the

SET button to turn o󰀨 the unit.

Non-Sleep Mode Selection

To save battery life, the WBGT Heat Stress Meter

turns o󰀨 automatically after 20 minutes of inactivity.

To monitor the environment continuously for longer

periods, you may override this feature:

1. With the meter turned o󰀨, press and hold the SET

and MODE buttons simultaneously for 2 seconds.

The meter displays П and enters Non-Sleep

measurement mode.

Inhaltsverzeichnis

Andere Sper scientific Messgerät Handbücher

Sper scientific

Sper scientific 850025 Bedienungsanleitung

Sper scientific

Sper scientific 850015 Bedienungsanleitung

Sper scientific

Sper scientific 840010 Bedienungsanleitung

Sper scientific

Sper scientific 850050 Bedienungsanleitung

Sper scientific

Sper scientific 850001E Bedienungsanleitung

Sper scientific

Sper scientific 840012 Bedienungsanleitung

Sper scientific

Sper scientific 850023 Bedienungsanleitung

Sper scientific

Sper scientific 840018 Bedienungsanleitung

Sper scientific

Sper scientific 850014 Bedienungsanleitung

Sper scientific

Sper scientific 300079 Bedienungsanleitung

Sper scientific

Sper scientific 850026 Bedienungsanleitung

Sper scientific

Sper scientific 300001 Bedienungsanleitung

Sper scientific

Sper scientific 850006 Installations- und Benutzerhandbuch

Sper scientific

Sper scientific 801038 Bedienungsanleitung

Sper scientific

Sper scientific 800020 Bedienungsanleitung

Sper scientific

Sper scientific 840024 Bedienungsanleitung

Sper scientific

Sper scientific 840065 Bedienungsanleitung

Sper scientific

Sper scientific 300056 Bedienungsanleitung

Sper scientific

Sper scientific 300003 Bedienungsanleitung

Sper scientific

Sper scientific 860041 Bedienungsanleitung

Sper scientific

Sper scientific Large Display Salinity Pen - 850036 Bedienungsanleitung

Sper scientific

Sper scientific 840005 Bedienungsanleitung

Sper scientific

Sper scientific 800111 Bedienungsanleitung

Sper scientific

Sper scientific AquaShock Bluetooth pH Kit 850057K Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung