Stamina 1725 Bedienungsanleitung

Model#: 55-1725

STAMINA PRODUCTS

MADE IN CHINA

Product May Vary Slightly

From Pictured.

Exercise can present a health

risk. Consult a physician

before beginninganyexercise

program with this equipment.

If you feel faint or dizzy,

immediately discontinue use

of this equipment. Serious

bodily injury can occur if this

equipment is not assembled

and used correctly. Serious

bodily injury can also occur if

allinstructionsarenotfollowed.

Keep others and pets away

from equipment when in use.

Alwaysmakesureallboltsand

nuts are tightened prior to

each use. Follow all safety

instructions in this manual.

When calling for parts or

service, please specify the

following number:

WARNING

CAUTION:

Weight on this product should not exceed 250 lbs.

Owner's

Manual

2008, 08 2008 Stamina Products, Inc.

2040 N. Alliance, Springfield, MO 65803

Customer Service

1 (800) 375-7520

www.staminaproducts.com

This Product is Produced Exclusively by

TABLE OF CONTENTS

Safety Instructions 2

Before You Begin 4

Equipment Warning & Notice Labels 5

Hardware Identification Chart 6

Assembly Instructions 7

Set Up Instructions 12

Operational Instructions 13

Storage 15

Maintenance 15

Conditioning Guidelines 16

Warm-Up and Cool-Down 17

Product Parts Drawing 18

Parts List 19

Warranty 21

Notes 22

Fax/Mail Ordering Form 23

Page Page

SAFETY INSTRUCTIONS

To reduce the risk of serious injury, read the following Safety Instructions before

using the Air Cross Trainer 1725 Elliptical.

WARNING:

Before starting any exercise or conditioning program you should consult with your personal

physician to see if you require a complete physical exam.This is especially important if you

are over the age of 35, have never exercised before, are pregnant, or suffer from any

illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW

THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.

WARNING:

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

Read all warnings posted on the Air Cross Trainer 1725 Elliptical.

The Air Cross Trainer 1725 Elliptical should only be used after a thorough review of the Owner's

Manual.

We recommend that two people be available for assembly of this product.

Keep children away from the Air Cross Trainer 1725 Elliptical. Do not allow children to use or play

on the Air Cross Trainer 1725 Elliptical. Keep children and pets away from the Air Cross Trainer

1725 Elliptical when it is in use.

Make sure the Air Cross Trainer 1725 Elliptical is properly assembled and that all nuts and bolts

are tightened before use.

It is recommended that you place this exercise equipment on an equipment mat.

Set up and operate the Air Cross Trainer 1725 Elliptical on a solid level surface. Do not position

the Air Cross Trainer 1725 Elliptical on loose rugs or uneven surfaces.

Make sure that adequate space is available for access to and around the Air Cross Trainer 1725

Elliptical.

Adjust the LEVELING CAPS(63) on the REAR STABILIZER(3) so that the Air Cross Trainer 1725

Elliptical sits on the floor without rocking.

Before using, inspect Air Cross Trainer 1725 Elliptical for worn or loose components, and tighten

or replace any worn or loose components prior to use.

Consult a physician prior to commencing an exercise program and follow his/her recommendations

in developing your fitness program. If at any time during exercise you feel faint, dizzy, or experience

pain, stop and consult your physician.

Follow your physician's recommendations in developing your own personal fitness program.

Always choose the workout which best fits your physical strength and flexibility level. Know your

limits and train within them. Always use common sense when exercising.

Do not wear loose or dangling clothing while using the Air Cross Trainer 1725 Elliptical.

Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or

cross training shoes that fit well, provide foot support, and feature non-skid rubber soles.

Care should be taken in mounting or dismounting the Air Cross Trainer 1725 Elliptical.

The Air Cross Trainer 1725 Elliptical should not be used by persons weighing over 250 pounds.

The Air Cross Trainer 1725 Elliptical should be used by only one person at a time.

TheAir Cross Trainer 1725 Ellipticalis forconsumeruse only.Itis notforusein public orsemipublic

facilities.

THANK YOU FOR PURCHASING THE

Air Cross Trainer 1725 Elliptical

To help you get started, we have pre-assembled most of your

Air Cross Trainer 1725 Elliptical at the factory with the exception

of those few parts left unassembled for shipping purposes.

Simply follow the few assembly instructions set forth in this manual.

With regular workouts, you will be getting your body into shape

and be on your way to achieving a happier and healthier lifestyle.

Should you have any questions,

please call our Customer Service Department toll-free number,

1 (800) 375-7520

Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.

Friday, 8:00 A.M. - 3:00 P.M., Central Time.

TELEPHONE

CUSTOMER SERVICE

Tel: 1 (800) 375-7520

FAX

CUSTOMER SERVICE

Fax: (417) 889-8064

MAIL

STAMINA PRODUCTS, INC.

ATTN: Customer Service

P.O. Box 1071

Springfield, MO. 65801-1071

ONLINE

CUSTOMER SERVICE

customerservice@staminaproducts.com

www.staminaproducts.com

CALL US FIRST

Customer Service

1(800)375-7520

www.staminaproducts.com

BEFORE YOU BEGIN

Thank youfor choosing the Air Cross Trainer 1725

Elliptical. We take great pride in producing this

quality product and hope it will provide many hours

ofqualityexerciseto makeyoufeelbetter,look better,

and enjoy life to its fullest.

It's a proven fact that a regular exercise program

can improve your physical and mental health. Too

often,ourbusylifestyleslimitour timeandopportunity

to exercise. The Air Cross Trainer 1725 Elliptical

provides a convenient and simple method to begin

your assault on getting your body in shape and

achieving a happier and healthier lifestyle.

Before reading further, please review the drawing

below and familiarize yourself with the parts that are

labeled.

Read this manual carefully before using the Air

Cross Trainer 1725 Elliptical.

Although Stamina constructs its products with the

finest materials and uses the highest standards of

manufacturing and quality control, there can

sometimes be missing parts or incorrectly sized

parts. If you have any questions or problems with

theparts included with yourAir Cross Trainer 1725

Elliptical, please do not return the product. Contact

us FIRST!

If a part is missing or defective, please call us toll

free at 1-800-375-7520 (in the U.S.). Our Customer

ServiceStaffisavailableto assist youfrom 7:30A.M.

to5:00P.M.(CentralTime)MondaythroughThursday

and 8:00A.M. to 3:00 P.M. (Central Time) on Friday.

If you would like to contact us online, go to our

websiteatwww.staminaproducts.comand accessthe

Customer Service section.

Be sure to have the name and model number of the

product available when you contact us.

THE FOLLOWING TOOLS ARE INCLUDED FOR ASSEMBLY : Wrench

Allen Wrench (6mm)

Right Handlebar

Upright

Meter

Lower Pivoting Arm

Pedal Arm

Pedal Cap

Endcap

Left Handlebar

Lower Pivoting Arm

Pedal Cap

Fan Cages

Rear Stabilizer

Leveling Cap

Crank Front Stabilizer

Warning Label

Foam Grip

Linkage

Leveling Cap

EQUIPMENT WARNING & NOTICE LABELS

This chart is provided to help identify the warning & notice labels on the Air Cross Trainer 1725 Elliptical.

Please take a moment to familiarize yourself with all of the warning & notice labels.

Label is larger than actual size

WARNING LABEL(92)

HARDWARE IDENTIFICATION CHART

This chart is provided to help identify the hardware used in the assembly process. Place the washers or the

ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the

length of the bolts and screws.

NOTICE: The length of all bolts and screws, except those with flat heads,

is measured from below the head to the end of the bolt or screw.

Flat head bolts and screws are measured from the top of the

head to the end of the bolt or screw.

mm.

in.

INCHES

MILLIMETERS

11/2021/2 31/2 41/2 51/2 61/2

0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150

6 8 10 12

3/16" 5/16" 1/2"3/8"1/4"

length

After unpacking the unit, open the hardware bag and make sure that you have all the following items.

Some hardware may be already attached to the part.

Part No. and Description Qty

65 Bolt, Button Head (M8 x 1.25 x 15mm) 4

66 Bolt, Button Head (M8 x 1.25 x 20mm) 2

67 Bolt, Button Head (M8 x 1.25 x 48mm) 2

73 Bolt, Hex Head (M6 x 1 x 36mm) 4

80 Nylock Nut (M8 x 1.25) 2

90 Lock Washer (M6) 4

91 Lock Washer (M8) 10

86 Acorn Nut (M6 x 1) 4

87 Acorn Nut (M8 x 1.25) 4

88 Arc Washer (M6) 4

89 Arc Washer (M8) 8

48 Large Washer (M8 x 32mm x 2mm thick) 2

53 Plastic Washer (M8 x ø18 x 2mm thick) 4

57 Large Washer (M16 x 0.5mm thick) 2

64 Carriage Bolt (M8 x 1.25 x 65mm) 4

76 Screw, Round Head (M5 x 15mm) 6

77 Screw, Round Head (M5 x 0.8 x 15mm) 4

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all

packing materials from your area and place them back into the box.Do not dispose of the packing materials

until assembly is completed. Read each step carefully before beginning. If you are missing a part please call

ourtoll-free number forassistance1-800-375-7520 ore-mail us at customerservice@staminaproducts.com.

ASSEMBLY INSTRUCTIONS

STEP 1

AttachtheFRONT STABILIZER(2) totheMAIN FRAME(1) withCARRIAGE BOLTS(M8x1.25x65mm)(64),

ARC WASHERS(M8)(89), LOCK WASHERS(M8)(91), and ACORN NUTS(M8x1.25)(87).

STEP 2

Attach the REAR STABILIZER(3) to the MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x65mm)(64),

ARC WASHERS(M8)(89), LOCK WASHERS(M8)(91), and ACORN NUTS(M8x1.25)(87).

NOTE: You can adjust the LEVELING CAPS(63) on the REAR STABILIZER(3) to keep the Air Cross

Trainer 1725 Elliptical stable.

ASSEMBLY INSTRUCTIONS

STEP 3

PlugtheSENSORWIRE(35) firmlyintotheSENSOR CONNECTIONWIRE(34).PlugtheLOWERCONTROL

WIRE(99) firmly into the CONTROL WIRE(98).

CAUTION: Be careful not to damage the SENSOR WIRES(34, 35) and CONTROL WIRES(98, 99) when

assembling the UPRIGHT(6).

STEP 4

InserttheUPRIGHT(6) intothe MAIN FRAME(1) andsecurewith BUTTON HEAD BOLTS(M8x1.25x15mm)

(65), ARC WASHERS(M8)(89), and LOCK WASHERS(M8)(91). Do not tighten the bolts until STEP 9.

ASSEMBLY INSTRUCTIONS

Place the front end of the RIGHT PEDALARM(5) on the ROLLER(60). Connect the back end of the RIGHT

PEDAL ARM(5) to the RIGHT CRANK(42) by threading the RIGHT PEDAL SHAFT(46) into the RIGHT

CRANK(42) and tighten securely. Repeat on the left side.

STEP 6

There is a "L" decal on the LEFT PEDAL CAP(50), and a "R" decal on the RIGHT PEDAL CAP(51).

AttachtheRIGHT PEDAL CAP(51) totheRIGHT PEDALARM(5) withROUND HEAD SCREWS (M5x15mm)

(76). Repeat on the left side.

NOTE:

There is a "L" decal on the LEFT PEDAL ARM(4), and a "R" decal on the RIGHT PEDAL

ARM(5).

The RIGHT PEDAL SHAFT(46) has right hand threads and is tightened by turning clockwise.

TheLEFT PEDAL SHAFT(45) hasleft handthreadsandistightened by turningcounterclockwise.

STEP 5

NOTE:

The LEFT and RIGHT PEDAL CAPS(50, 51) have a raised lip on two sides. Attach the LEFT and

RIGHT PEDAL CAPS(50, 51) to the LEFT and RIGHT PEDAL ARMS(4, 5) so the raised lip is on

the front and the inner sides.

ASSEMBLY INSTRUCTIONS

STEP7: Thereisa"L" decalontheLEFTHANDLEBAR(7), anda"R"decal ontheRIGHT HANDLEBAR(8).

To assemble the RIGHT HANDLEBAR(8), place a SPACER(56) and a LARGE WASHER(M16)(57) onto

the right side of the SHAFT on the UPRIGHT(6). Slide the RIGHT HANDLEBAR(8) onto the SHAFT and

secure with a LARGE WASHER(M8)(48), LOCK WASHER(M8)(91), and BUTTON HEAD BOLT

(M8x1.25x20mm)(66). Repeat on the left side.

STEP 8: Attach the LOWER PIVOTINGARMS(9) to the LEFT and RIGHT HANDLEBARS(7, 8) with HEX

BOLTS(M6x1x36mm)(73), ARC WASHERS(M6)(88), LOCK WASHERS(M6)(90), and ACORN NUTS

(M6x1)(86). The HEX BOLTS(M6x1x36mm)(73) fit inside the hex-shaped holes in the HANDLEBARS

(7, 8). Attach the LOWER PIVOTING ARMS(9) to the LINKAGES(10) at both sides with the PLASTIC

WASHERS(M8)(53), BUTTON HEAD BOLTS(M8x1.25x48mm)(67), and NYLOCK NUTS(M8x1.25)(80).

STEP 9: Look down from the top of the UPRIGHT(6) to make sure the pivot tubes on the HANDLEBARS

(7, 8) areparallelto the FRONT STABILIZER(2) andthe PEDALARMS(4, 5) arecrossingthe ROLLERS(60)

properly. Tighten the BUTTON HEAD BOLTS(M8x1.25x15mm)(65) as described in STEP 4 on the

UPRIGHT(6).

Shaft

Look down from the top

Pivot Tube

Andere Handbücher für 1725

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Stamina Ellipsentrainer Handbücher

Stamina

Stamina 55-2065 Bedienungsanleitung

Stamina

Stamina AVARI Magnetic Elliptical Bedienungsanleitung

Stamina

Stamina DT Plus Rower Bedienungsanleitung

Stamina

Stamina EX 30 Bedienungsanleitung

Stamina

Stamina 1764 Bedienungsanleitung

Stamina

Stamina Total Body Pro Elliptical 55-1702 Bedienungsanleitung

Stamina

Stamina InMotion E-1000 Bedienungsanleitung

Stamina

Stamina 1725 Bedienungsanleitung

Stamina

Stamina InMotion E3000 Bedienungsanleitung

Stamina

Stamina INSTRIDE 55-1615 Bedienungsanleitung

Stamina

Stamina Avari Fitness A550-043 Bedienungsanleitung

Stamina

Stamina CT2.0 Bedienungsanleitung

Stamina

Stamina 1701 Bedienungsanleitung

Stamina

Stamina 55-2010 Bedienungsanleitung

Stamina

Stamina In Motion E-1000 Bedienungsanleitung

Stamina

Stamina 55-1610B Bedienungsanleitung

Stamina

Stamina InMotion E3000 Bedienungsanleitung

Stamina

Stamina AVARI 2000E Elliptical Trainer Bedienungsanleitung

Stamina

Stamina InMotion Elliptical Bedienungsanleitung

Stamina

Stamina inMOTION Compact Strider Pro Bedienungsanleitung

Stamina

Stamina 55-1703 Bedienungsanleitung

Stamina

Stamina in motion e3000 Bedienungsanleitung

Stamina

Stamina 704 Bedienungsanleitung

Stamina

Stamina AVARI GX 8 Bedienungsanleitung

Beliebte Ellipsentrainer Handbücher anderer Marken

Weslo

Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch

Progear Fitness

Progear Fitness Air elliptical pro 1307 Bedienungsanleitung

Torque Fitness

Torque Fitness XPLLP Bedienungsanleitung

Octane Fitness

Octane Fitness PRO3700C Bedienungsanleitung

Xterra

Xterra FS5.8e Bedienungsanleitung

Bodyguard

Bodyguard E-40 Bedienungsanleitung

Bonn Germany

Bonn Germany Concept 2.2 Bedienungsanleitung

Precor

Precor Resolute RSL 620 Bedienungsanleitung

NordicTrack

NordicTrack E 9.2 Elliptical Bedienungsanleitung

Vision Fitness

Vision Fitness X6600iNetTV Bedienungsanleitung

Matrix

Matrix MX-A5x Bedienungsanleitung

SportsArt Fitness

SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung

Sears

Sears FREE SPIRIT C249 30737 0 Bedienungsanleitung

True

True FS-64 Bedienungsanleitung

Sport-thieme

Sport-thieme ST 310 Bedienungsanleitung

VIRTUFIT

VIRTUFIT CTR 1.1 Bedienungsanleitung

Kettler

Kettler GIRO C 1 Bedienungsanleitung

CIRCLE FITNESS

CIRCLE FITNESS E7 Bedienungsanleitung