Stanley SCL-D Bedienungsanleitung

Please read these instructions before operating the product

Cross Line /Plumb Spot Combination Laser

FMHT77321 Self-Levelling

SCL-D

ENGLISH

FRANÇAIS

ESPANOL

SCL-D

2FMHT77321

(-)

(+) (-)

(+)

(-)

(+)

FMHT77321 3

SCL

D1SCL-D

F1F2

4FMHT77321

P1P2

P1D3

H1H2

FMHT77321 5

I1I2

P2D2

6FMHT77321

2 x L

K1K2

J1J2

FMHT77321 7

Notes

8FMHT77321

Retain all sections of the manual for future reference.

User Safety

WARNING:

• Carefully read the Safety Instructions and

Product Manual before using this product.

The person responsible for the instrument must

ensure that all users understand and adhere to

these instructions.

WARNING:

• The following labels are placed on your laser tool

to inform of the laser class for your convenience

and safety. (Text has been translated here for

your convenience)

CAUTION:

• While the laser tool is in operation, be careful

not to expose your eyes to the emitting laser

beam (red light source). Exposure to a laser

beam for an extended time may be hazardous

to your eyes.

CAUTION:

• Glasses may be supplied in some of the laser

tool kits. These are NOT certiﬁed safety glasses.

These glasses are ONLY used to enhance the

visibility of the beam in brighter environments or

at greater distances from laser source.

Contents

• User Safety

• Contents

• Product Overview

• Keypad, Modes, and LED

• Applications

IEC/EN 60825-1 SCL-D

Complies with 21 CFR 1040.10 and 1040.11 except for

deviations pursuant to Laser Notice No. 50, dated

June 24, 2007

LASER RADIATION - DO NOT

STARE INTO THE BEAM

CLASS 2 LASER PRODUCT

Max Output ≤ 1 mW @ 630 - 670 nm

• Batteries and Power

• Set Up

• Operation

• Accuracy Check and Calibration

• Speciﬁcations

Product Overview

Figure A - Laser Tool

1. Keypad

2. Window for Vertical Beam Laser

3. Window for Horizontal Beam Laser

4. Pendulum / Transport Lock

5. Window for Up Beam Laser (SCL-D only)

6. Battery Cover

7. 5/8 - 11 Threaded Mount

Window for Down Beam Laser (SCL-D only)

8. 1/4 - 20 Threaded Mount

Figure B - Laser Tool Battery Location

6. Battery Cover

9. Batteries - 3 x “AA” (LR6) (Included)

Figure C - Pendulum / Transport Lock Positions

Figure D - Keypad Conﬁgurations

Figure E - Laser Modes

Figure F - Pulse Mode

Figure H - Level Beam Accuracy

Figure I - Horizontal Beam Accuracy

Figure J - Vertical Beam Accuracy

Figure K - Up and Down Beam Accuracy

ENGLISH

FMHT77321 9

Keypad, Modes, and LED

Keypads (See ﬁgure D)

Power ON / OFF / Mode Key

Pulse Mode ON / OFF Key

Modes (See ﬁgure E)

Available Modes (SCL)

• Horizontal Line

• Vertical Line

• Horizontal Line and Vertical Line (Cross)

• All beams OFF

Available Modes (SCL-D)

• Horizontal Line

• Vertical Line

• Horizontal Line and Vertical Line (Cross)

• Up and Down Dot Beam

• All Line and Dot

• All beams OFF

LEDs (See ﬁgure D)

Power LED - Solid GREEN

• Power is ON

Power LED - Blinking RED

• Low Battery

Power LED - Solid RED

• Replace Battery / Battery Needs Recharging

Level LED - Blinking RED

• Out of Compensation Range

Pulse LED - Solid GREEN

• Pulse Mode is ON

(Can be used with Detector)

Applications

Plumb / Point Transfer

• Using the vertical laser beam, establish a vertical

reference plane.

• Position the desired object(s) until they are aligned

with the vertical reference plane to ensure object(s)

are plumb.

• Establish 2 reference points that need to be plumb.

• Align either the down laser beam or the up laser beam to

a set reference point.

• The opposing laser beam(s) will be projecting a point

which is plumb.

• Position the desired object until the laser beam is

aligned with the second reference point that needs to be

plumb with the set reference point.

Level / Point Transfer

• Using the horizontal laser beam, establish a horizontal

reference plane.

• Position the desired object(s) until they are aligned

with the horizontal reference plane to ensure object(s)

are level.

Square

• Using the vertical and horizontal laser beams, establish

a point where the 2 beams cross.

• Position the desired object(s) until they are aligned with

both the vertical and horizontal laser beams to ensure

object(s) are square.

Pulse Mode (See ﬁgure F)

• Setting laser tool to pulse mode allows use with

optional laser detectors.

10 FMHT77321

Batteries and Power

Battery Installation / Removal (See ﬁgure B)

Laser Tool

• Turn laser tool to battery door and open.

• Install / Remove batteries. Orient batteries correctly

when placing into battery compartment.

• Close battery door. Be sure that the door has been

closed securely.

WARNING:

• Pay close attention to the battery holder’s (+)

and (-) markings for proper battery insertion.

Batteries must be of same type and capacity. Do

not use a combination of batteries with different

capacities remaining.

Set Up

Laser Tool

• Place laser tool on a ﬂat, stable surface.

• If using the auto levelling feature move the pendulum

/ transport lock to the unlocked position. The laser tool

must then be positioned in its upright position on a

surface that is within the speciﬁed compensation range.

Mounting on Accessories

• Position accessory in a place where it will not be easily

disturbed and near the central location of the area to

be measured.

• Set up the accessory as required. Adjust positioning to

be sure accessory base is near horizontal (within laser

tools compensation range).

• Mount the laser tool to the accessory using the

appropriate fastening method to be used with such

accessory / laser tool combination.

CAUTION:

• Do not leave the laser tool unattended on an

accessory without fully tightening the fastening

screw. Failing to do so may lead to the laser tool

falling and sustaining possible damage.

NOTE:

• It is best practice to always support laser tool with

one hand when placing or removing laser tool from an

accessory.

• If positioning over a target, partially tighten the fastening

screw, align laser tool, and then fully tighten.

Inhaltsverzeichnis

Sprachen:

Andere Stanley Laser-Nivelliergerät Handbücher

Stanley

Stanley SPL3 Bedienungsanleitung

Stanley

Stanley STHT77616 Bedienungsanleitung

Stanley

Stanley IntelliLaser Pro Bedienungsanleitung

Stanley

Stanley SLP3 Bedienungsanleitung

Stanley

Stanley FATMAX FMHT1-77416 Bedienungsanleitung

Stanley

Stanley FATMAX FMHT1-77356 Bedienungsanleitung

Stanley

Stanley FatMax AL32 Bedienungsanleitung

Stanley

Stanley Fatmax FMHT77617 Bedienungsanleitung

Stanley

Stanley Fatmax Series Bedienungsanleitung

Stanley

Stanley STHT77504-1 Bedienungsanleitung

Stanley

Stanley Fatmax FMHT1-77415 Bedienungsanleitung

Stanley

Stanley SP5 Bedienungsanleitung

Stanley

Stanley CL2XTi Bedienungsanleitung

Stanley

Stanley CROSS 90 Bedienungsanleitung

Stanley

Stanley RL HW Bedienungsanleitung

Stanley

Stanley RL HW Bedienungsanleitung

Stanley

Stanley IntelliLaser Pro Bedienungsanleitung

Stanley

Stanley FatMax FMHT77598 Bedienungsanleitung

Stanley

Stanley TLM30 Bedienungsanleitung

Stanley

Stanley Fat Max S2 Bedienungsanleitung

Stanley

Stanley FatMax PB2 Bedienungsanleitung

Stanley

Stanley SLP3 Einrichtungshandbuch

Stanley

Stanley STHT77512-1 Bedienungsanleitung

Stanley

Stanley STHT77498-1 Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung