STEINDORFF NYMCS-360 Bedienungsanleitung

STEINDORFF®

Zoom Stereo Microscope

NYMCS-360

Instruction Manual

This manual is written for stereo microscope NYMCS-360. To ensure the safety, obtain optimum performance and to

familiarize yourself fully with the use of this microscope, it is recommended strongly that you study this manual

thoroughly before using the microscope. Retain this manual in an easily accessible place near the work desk for future

reference.

STEINDORFF®

USER NOTICE ……………………………………………………………………………………………

1. Components …………………………………………………………………………………………..

2. Assembly ……………………………………………………………………………………………...

2.1. Assembly Diagram ……………………………………………………………………………...

2.2. Detailed Assembly Procedure ………………………………………………………………….

3. Adjustment and Operation …………………………………………………………………………..

3.1. Adjusting Binocular Viewing Head ……………………………………………………………

3.2. Focus Adjustment ………………………………………………………………………………

4. Photography and Video Attachment ………………………………………………………………..

4.1. Photography and Video Attachment Assembly ………………………………………………

4.2. The Magnification of Photography and Video ………………………………………………..

4.3. Switching the Light Path ……………………………………………………………………….

5. Specification …………………………………………………………………………………………..

6. Troubleshooting ………………………………………………………………………………………

7. Outfit ………………………………………………………………………………………………….

CONTENTS

STEINDORFF®

1. Safety Precaution

1.1. Carefully open the box, avoid the accessories, like lens, dropping to ground and being damaged.

1.2. Check the input voltage, be sure the input voltage which signed on the microscope is consistent with the

power supply voltage, or it will bring a serious damage to the instrument.

1.3. Do keep the instrument out of direct sunlight, high temperature or humidity, dusty and easy shaking

environment. Make sure the stage is smooth, horizontal and firm enough.

1.4. To prevent the microscope body from turning over, its pivot angle must be limited to 30°.

1.5. A microscope is a precision instrument. Handle it with care and avoid subjecting it to sudden or severe

impact.

1.6. Make sure the instrument is earthed, to avoid lighting strike.

1.7. Do not disassemble any part of the microscope, especially the electrical parts on the bottom side as this may

result in electric shock.

1.8. Use the factory supplied power cord, please.

2. Maintenance and Storage

2.1. All the lenses have been well checked and adjusted. It is forbidden to disassemble them yourself.

2.2. The binocular viewing head and focusing unit have a compact and precise frame; please don’t disassemble

them as possibly as you can.

2.3. Keep the instrument clean, wipe dust regularly, and be attention to avoid contaminating the optical elements

especially.

2.4. The contaminations on the prism, as fingerprint and oil, could be gently wiped with a piece of soft cloth or

tissue paper, gauze which has been immersed in pure alcohol or ether.

(Note that the alcohol and ether are highly flammable, keep them away from the fire or potential

sources of electrical sparks, and use them in a drafty room as possible as you can.)

2.5. Do not attempt to use organic solvents to clean the microscope components other than the glass components.

To clean them, use a lint-free, soft cloth slightly moistened with a diluted neutral detergent.

2.6. If the microscope is splashed by liquid during using, cut off the power at once, and wipe up the moisture.

2.7. Do not disassemble any parts of the microscope, which will affect the function or decline the performance

of the microscope.

2.8. Place the instrument in a cool, dry position. When not using the microscope, keep it covered with a dust

cover.

USER NOTICE

STEINDORFF®

Stereo Microscope NYMCS-360

1. COMPONENTS

Adjustable WF10×eyepieces

Focusing Assembly

Binocular viewing head

Zoom body

Clamping Knob

Objectives

Glass stage

Standard base

Brightness adjusting knob

Power cord

Main Switch

STEINDORFF®

2.1. Assembly Diagram

The diagram below shows how to assemble the various modules. The numbers indicate the order of assembly.

When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching any

parts or touching glass surfaces.

2. ASSEMBLY

Power cord

Microscope main body

Zoom body

WF10× Diopter adjustable eyepiece

⑤

④

Binocular viewing head

①

③

②

⑥

Clamping knob

STEINDORFF®

Fig.3

⑥

⑦

⑧

⑨

2.2. Detailed Assembly Procedure

2.2.1. Mounting binocular viewing head (Fig.1, Fig.2)

1. Rotate the objective ① into the objective mount thread on

the lower end of the zoom body. ②, as ③ in fig.2.

2. Aligning the positioning pin of the zoom body ③ to the

positioning groove on the binocular viewing head ④,

insert the dovetail mount at the bottom of the viewing head

into the mounting port on the zoom body ③, and tighten

the viewing head clamping screw ⑤ with provided

hexagonal driver.

Fig.1

②

①

⑤

④

③

Fig.2

Positioning Pin

Mounting Port

Note:

Working Environment Requirement：

1. Ambient temperature: 5°C to 40°C. (41°F to 104°F),

Maximum R.H: 85%.

2. High Temperature will result in a mildewing, dew and even

ruinous instrument.

3. Avoid placing the instrument in a dusty environment. When

ending your microscope operation, please cover it with the

dust cover.

4. Lay the microscope in a plan and stable position, please.

STEINDORFF®

Fig.7

④

Fig.6

①

③

②

Fig.4

⑩

Fig.5

2.2.2. Mounting binocular head (Fig. 3)

Loose the clamping bolt ⑦ on the pillar ⑥ and insert

the binocular head and zoom body assembly ⑧ into the

bracket of the pillar, then screw down the bolt ⑦.

2.2.3. Mounting eyepieces (Fig. 3, Fig. 4, Fig. 5)

1. Remove the eyepiece dust caps ⑨ and gently insert

two adjustable eyepieces ⑩ into the eyepiece

sleeves until they stops, as in Fig.4.

2. Using the Eye Shades

When Wearing Eyeglasses:

Use with eye shades in their normal folded-down

position. This will prevent eyeglasses from being

scratched by the eyepiece as in Fig 5.

When Not Wearing Eyeglasses:

Extend the folded eyeshades. This makes

observation easier by preventing the inverse

incidence of light from between the eyepiece and

your eyes.

2.2.4. Connecting the power cord (Fig. 6)

1. Turn the main switch ① on “O” (off) state before

connecting the power cord.

2. Insert the power plug ② into the power jack of the

microscope; make sure the connection is well.

3. Plug the power cord ③ into the power supply

receptacle safely. Make sure the connection is well.

2.2.5. Mounting glass stage plate (Fig. 7)

If necessary, the original plastic stage plate can be

replaced by a glass one.

Both top and bottom illuminators are LEDS.

Permitted power supply voltage: 100V～240V.

STEINDORFF®

Adjusting aperture iris diaphragm:

The aperture iris diaphragm adjustment can increase the image contrast and focus depth.

The size of aperture iris diaphragm can be adjusted. Switch the lever to left to open the aperture iris diaphragm;

to the right, to close the aperture iris diaphragm. Check the effect during observation.

Do not close the aperture iris diaphragm too much, or it will decrease the resolution and lead to lack of

illumination.

Closing the aperture iris diaphragm to the minimum state will result in faintness in field of view. In this case,

adjust the aperture iris diaphragm to the half open state.

Closing the aperture iris diaphragm to the minimum state and increase the magnification of the zoom body

will result in lack of illumination around circumference of field of view.

Fig.8

①

②

Fig.9

Aperture iris diaphragm lever

③

2.2.6. Mounting aperture iris diaphragm attachment (Fig.8,

Fig.9)

oAperture iris diaphragm attachment is optional.

1. Use the provided hexagonal driver to loosen the clamping

bolt and remove the binocular viewing head ①.

2. Mounting the aperture iris diaphragm attachment ② to

the top end of the zoom body.

3. Mounting the binocular head into the aperture iris

diaphragm attachment and tighten the clamping bolt ③.

STEINDORFF®

Fig. 12

⑦

⑥

3.1. Adjusting Binocular Viewing Head

3. ADJUSTMENT AND OPERATION

Fig. 10

①

⑤

④

②

③

Fig. 11

3.1.1. Adjusting interpupillary distance (Fig. 10)

Different users have different interpupillary distances. So when users

change, do the interpupillary distance adjustment.

3.1.2. Adjusting diopter ring (Fig. 11, Fig. 12)

1. Set the diopter rings of both eyepieces to “0”position.

(Do this when users change, because different users have

different diopters.)

2. Place an easy-to-observe specimen on the stage plate.

3. Rotate the zoom body knob ③ to the highest

magnification 5× (or 6.4×, or 10×), and turn the focusing

knob ④ to focus the specimen.

4. Rotate the zoom body knob ③ to the lowest

magnification 0.8×, looking only into the left eyepiece,

adjust the diopter ring on left eyepiece to focus the

specimen. Then do the same thing for the right one.

5. Repeat item 3 and 4 until the specimen image can always

focus without any adverse effect of the changes of

magnification on the definition of the image.

Fig. 11 shows the focusing part of Stereo Microscope

NYMCS-360/361;

Fig.12 shows the focusing part of Stereo Microscope

NYMCS-360. There are coarse focusing knob ⑥ and

fine focusing knob ⑦ in this kind of microscope.

The working distance of the objectives listed in standard

outfit is all 78mm for these three kinds of stereo

microscopes.

When 2× objective is chosen, it is necessary to mount the

binocular head bracket ⑤ onto the lower position.

Remove the clamping bolt with provided hexagonal

driver and move the bracket down to the lower position

and set it with original bolt (Fig. 11).

STEINDORFF®

3.2. Focus Adjustment

Spanner

Fig.15

⑤

①

②

Fig.13

③

④

Fig.14

3.2.1. Adjusting the rotation tension of the focus adjustment

knob (fig. 13, fig. 14)

The tension of the microscope has been adjusted well before

delivery.

1. Rotate the focus adjustment knob ① to move the slider

② to a lower place for fear that the zoom body drops

down suddenly if the tension is decreased too much.

2. Hold the focus adjustment knobs ① with both hands,

stop the left knob and rotate the right knob to increase or

decrease the focus knob tension.

3. Brightness adjustment: the right brightness adjustment

knob ③ is used to adjust the bottom illumination, and

the left brightness adjustment knob ④ is used to adjust

the top illumination.

3.2.2. Adjusting tension collar (Fig. 15)

1. For coarse and fine focus stand, if the microscope body

falls down by its own weight or the focus obtained by fine

focusing is lost immediately, the rotation tension

adjustment may be too light. In this case, rotate the

tension collar with provided spanner to increase the

rotation tension.

SAFETY PRECAUTION:

1. After the equipment has been used in an observation of a

specimen that is accompanied with a potential of infection, clean

the parts coming in contact with the specimen to prevent

infection.

2. Moving this microscope is accompanied with the risk of

dropping the specimen and causing infections. Be sure to

remove the specimen before moving this product.

3. Move the microscope with both hands; one hand catches the

arm, and the other hold the base.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere STEINDORFF Mikroskop Handbücher

STEINDORFF

STEINDORFF S-3000 Series Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-342 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-VM400 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-VM2000N Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-290 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-1701 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMC0035000C Bedienungsanleitung

STEINDORFF

STEINDORFF S-340 Bedienungsanleitung

STEINDORFF

STEINDORFF CX SERIES Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-615 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-931 Bedienungsanleitung

STEINDORFF

STEINDORFF S-VM300 Bedienungsanleitung

STEINDORFF

STEINDORFF S-271 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-320 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-1500 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-702 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-1290 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-310 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-605 Bedienungsanleitung

STEINDORFF

STEINDORFF S-1260 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMC38000 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-620 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-237 Bedienungsanleitung

STEINDORFF

STEINDORFF NYMCS-603 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung