Supermicro SBI-7128R-C6 Bedienungsanleitung

SBI-7128R-C6

Blade Module

User’s Manual

Revison 1.0

SBI-7128R-C6 Blade Module User’s Manual

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The

vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no

commitment to update or to keep current the information in this manual, or to notify any person or

organization of the updates. Please Note: For the most up-to-date version of this manual, please see

our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software and documentation, is the

property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction

of this product is not allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE

THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY HARDWARE,

SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF

REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE,

SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara

County in the State of California, USA. The State of California, County of Santa Clara shall be the

exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not

exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the manufacturer’s instruction manual, may cause harmful interference with radio

communications. Operation of this equipment in a residential area is likely to cause harmful interference,

in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning

applies only to products containing CR (Manganese Dioxide) Lithium coin cells. Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate for further

details.

Manual Revison 1.0

Release Date: November 25, 2014

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy

any part of this document.

Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

WARNING: HANDLING OF LEAD SOLDER MATERIALS USED IN THIS

PRODUCT MAY EXPOSE YOU TO LEAD, A CHEMICAL KNOWN TO THE

STATE OF CALIFORNIA TO CAUSE BIRTH DEFECTS AND OTHER

REPRODUCTIVE HARM.

iii

Preface

About this Manual

This manual is written for professional system integrators, Information Technology

professionals, service personnel and technicians. It provides information for the

installation and use of Supermicro's SBI-7428R-C6 blade module. Installation and

maintenance should be performed by experienced professionals only.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with

SBI-7428R-C6 blade module and describes their main features.

Chapter 2: System Safety

You should familiarize yourself with this chapter for a general overview of safety

precautions that should be followed when installing and servicing SBI-7428R-C6 blade

module.

Chapter 3: Setup and Installation

Refer to this chapter for details on installing the SBI-7428R-C6 blade module into the

SuperBlade®chassis. Other sections cover the installation and placement of memory

modules and the installation of hard disk drives into the blade module.

Chapter 4: Blade Module Features

This chapter coves features and component information about SBI-7428R-C6 blade

module. Included here are descriptions and information for mainboard components,

connectors, LEDs and other features of the blade module.

Chapter 5: RAID Setup Procedure

RAID setup and operations for SBI-7428R-C6 blade module are covered in this chapter.

Chapter 6: BIOS

BIOS setup is covered in this chapter for SBI-7428R-C6 blade module.

Appendix A: BIOS POST Codes

BIOS POST Codes for SBI-7428R-C6 blade module are explained in this appendix.

SBI-7428R-C6 Blade Module User’s Manual

Notes

Table of Contents

Chapter 1 Introduction.......................................................................1-1

1-1 Overview.............................................................................................1-1

1-2 Product Checklist of Typical Components.....................................1-1

1-3 Blade Module Features....................................................................1-2

Processors..............................................................................................1-2

Memory...................................................................................................1-2

Storage....................................................................................................1-3

Density....................................................................................................1-3

1-4 Contacting Supermicro.....................................................................1-4

Chapter 2 Standardized Warning Statements.....................2-1

2-1 About Standardized Warning Statements......................................2-1

Warning Definition...................................................................................2-1

Installation Instructions ...........................................................................2-3

Circuit Breaker........................................................................................2-4

Power Disconnection Warning................................................................2-5

Equipment Installation.............................................................................2-6

Restricted Area.......................................................................................2-7

Battery Handling .....................................................................................2-9

Redundant Power Supplies ..................................................................2-10

Backplane Voltage................................................................................2-11

Comply with Local and National Electrical Codes.................................2-12

Product Disposal...................................................................................2-13

Hot Swap Fan Warning.........................................................................2-14

Power Cable and AC Adapter ..............................................................2-15

Chapter 3 Setup and Installation.................................................3-1

3-1 Overview.............................................................................................3-1

3-2 Installing Blade Modules..................................................................3-1

Powering Up a Blade Unit.......................................................................3-1

Powering Down a Blade Unit ..................................................................3-1

Removing a Blade Unit from the Enclosure............................................3-2

Removing/Replacing the Blade Cover....................................................3-2

Installing a Blade Unit into the Enclosure ...............................................3-2

3-3 Processor Installation.......................................................................3-4

3-4 Onboard Battery Installation............................................................3-9

SBI-7428R-C6 Blade Module User’s Manual

3-5 Memory Installation...........................................................................3-9

Populating Memory Slots........................................................................3-9

DIMM Installation ..................................................................................3-11

3-6 Hard Disk Drive Installation...........................................................3-12

3-7 Installing the Operating System....................................................3-13

Installing with an External USB CD-ROM Drive....................................3-13

Installing via PXE Boot..........................................................................3-13

Installing via Virtual Media (Drive Redirection) .....................................3-13

3-8 Management Software...................................................................3-14

3-9 Configuring and Setting up RAID .................................................3-14

Chapter 4 Blade Module Features..............................................4-1

4-1 Control Panel.....................................................................................4-2

Power Button ..........................................................................................4-3

KVM Button.............................................................................................4-3

LED Indicators ........................................................................................4-3

KVM Connector.......................................................................................4-3

4-2 Mainboard...........................................................................................4-4

Jumpers..................................................................................................4-6

CMOS Clear............................................................................................4-6

4-3 Blade Unit Components...................................................................4-7

Memory Support .....................................................................................4-8

Hard Disk Drives.....................................................................................4-8

Chapter 5 RAID Setup Procedure...............................................5-1

5-1 RAID Configurations.........................................................................5-1

5-2 Preparing for Setup...........................................................................5-1

5-3 RAID Setup Procedure.....................................................................5-2

Chapter 6 BIOS.......................................................................................6-1

6-1 Introduction.........................................................................................6-1

System BIOS ..........................................................................................6-1

How To Change the Configuration Data .................................................6-1

Starting the Setup Utility..........................................................................6-1

6-2 BIOS Updates....................................................................................6-2

Flashing BIOS.........................................................................................6-2

6-3 Running Setup...................................................................................6-3

6-4 Main BIOS Setup...............................................................................6-4

6-5 Advanced Setup................................................................................6-5

vii

Table of Contents

6-6 Event Logs Setup............................................................................6-17

6-7 IPMI Setup........................................................................................6-19

6-8 Security.............................................................................................6-20

6-9 Boot...................................................................................................6-21

6-10 Save & Exit.....................................................................................6-22

Appendix A BIOS POST Codes....................................................A-1

A-1 BIOS POST Messages....................................................................A-1

A-2 BIOS POST Codes...........................................................................A-3

Recoverable POST Errors......................................................................A-4

Terminal POST Errors.............................................................................A-4

SBI-7428R-C6 Blade Module User’s Manual

viii

Notes

1-1

Chapter 1

Introduction

1-1 Overview

This user’s manual covers the 2133/1866/1600 MHz speed SDRAM blade module. This

blade module is a compact self-contained server that connects into a pre-cabled

enclosure that provides power, cooling, management and networking functions. One

enclosure for the SBI-7128R-C6 blade module can hold ten blade units.

In this manual, “blade system” refers to the entire system (including the enclosure and

blades units), “blade” or “blade unit” refers to a single blade module and “blade

enclosure” is the chassis that the blades, power supplies and modules are housed

within.

Please refer to our web site for information on operating systems that have been

certified for use with the SuperBlade (www.supermicro.com/products/superblade/).

1-2 Product Checklist of Typical Components

Your blade module ships with its B10DRC mainboard already installed in its chassis.

Memory, hard disk drives and the CPU must all be installed by the user after shipment.

See Chapter 3: "Setup and Installation" on page 3-1 for details on installation of these

components.

Aside from the blade module unit itself, the following optional Mezzanine add-on cards

(with Infiniband Switch) may be ordered for your blade module:

• AOC-IBH-X3QD

• AOC-IBH-X3QS

• AOC-XEH-iN2

• AOC-IBH-XDD

• AOC-IBH-XQD

• AOC-IBH-XQS

• AOC-IBH-XDS

See the Supermicro website and the SuperBlade Network Modules User’s Manual on

your SuperBlade system’s CD-ROM for more details on these add-on cards.

SBI-7128R-C6 Blade Module User’s Manual

1-2

1-3 Blade Module Features

Table 1-1 lists the main features of the SBI-7128R-C6 blade module. See the

proceeding section for components typically included in a blade system and other

optional components. Specific details for the SBI-7128R-C6 blade module are found in

Chapter 4: "Blade Module Features" on page 4-1.

Processors

The SBI-7128R-C6 blade module supports dual 2011-pin (LGA 2011 Socket R3) Intel

Xeon E5-2600 v3 series processors.

Refer to the Supermicro web site for a complete listing of supported processors (http://

www.supermicro.com/products/superblade). Please note that you will need to check the

detailed specifications of a particular blade module for a list of the CPUs it supports.

Details on installation of the processor into the SBI-7128R-C6 blade module are found in

Chapter 3: "Setup and Installation" on page 3-1.

Memory

The SBI-7128R-C6 blade module has sixteen (16) 288-pin DDR4 DIMM sockets that

can support up to either 512 GB of 64 GB and 32 GB LRDIMM or 1 TB of 32 GB, 16 GB,

8 GB and 4 GB RDIMM, 2133/1866/1600 MHz speed SDRAM. Memory is interleaved,

which requires modules of the same size and speed to be installed in groups (of two or

three).

Table 1-1. SBI-7128R-C6 Blade Module Specification Features

Mainboard B10DRC (proprietary form factor)

Chassis Dimensions (HxWxD): 11.32"x 1.67" x20.5" (288-mm x 42.4-mm x

520.7-mm)

Processors Dual or quad core Intel™Xeon®E5-2600 v3 series 2011-pin processors.

Please refer to our web site for a complete listing of supported processors.

FSB Speed QPI up to 9.6 GT/s

Chipset Intel C612

Graphics Controller Aspeed AST2400 BMC Graphics

BIOS 128 MB SPI Flash EEPROM with AMI® BIOS

Memory Capacity Supports up to 1 TB memory in 64 GB and 32 GB LRDIMM or 512 GB in

32 GB, 16 GB, 8 GB and 4 GB RDIMM size, 2133/1866/1600 MHz speed

SDRAM in sixteen (16) 288-pin DDR4 DIMM sockets

SATA Controller Intel C612 on-chip controller for six Serial ATA drives

Hard Drive Bays Includes six hot-swap drive bays for 2.5" Hot-swap HDD/SSD/NVMe SATA

disk drives (RAID 0, 1 and 5), but only three of these drives can support

NVMe.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro SuperServer SSG-540P-E1CTR36L Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 2028TP-DNCR Bedienungsanleitung

Supermicro

Supermicro SuperServer 5039C-I Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-E Series Bedienungsanleitung

Supermicro

Supermicro 5025M-4 Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6021i Bedienungsanleitung

Supermicro

Supermicro 7044H-82 Bedienungsanleitung

Supermicro

Supermicro SuperWorkstation 540A-TR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6023L-8R Bedienungsanleitung

Supermicro

Supermicro Supero SUPERSERVER 6027TR-DTRF Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A Bedienungsanleitung

Supermicro

Supermicro SYS-1028UX-LL1-B8 Bedienungsanleitung

Supermicro

Supermicro SuperServer 530MT-H12TRF Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029P-WTR Bedienungsanleitung

Supermicro

Supermicro SuperServer 6014H-i Bedienungsanleitung

Supermicro

Supermicro SuperServer 8048B-TRFT Bedienungsanleitung

Supermicro

Supermicro SuperServer 120U-TNR Bedienungsanleitung

Supermicro

Supermicro SuperStorage 1029P-NMR36L Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-111E-WR Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-121H-TNR Bedienungsanleitung

Supermicro

Supermicro SSG-937R-E2CJB Bedienungsanleitung

Supermicro

Supermicro SuperServer 1029U-TN12RV-NEBS Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-5039MC-H8TRF Bedienungsanleitung

Supermicro

Supermicro 2028UT-BC1NRT Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung