Supermicro Supero A+ SERVER 1042G-TF Bedienungsanleitung

SUPER ®

USER’S MANUAL

Revision 1.0d

A+ SERVER

1042G-TF

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software and

documentation, is the property of Supermicro and/or its licensors, and is supplied only under a

license. Any use or reproduction of this product is not allowed, except as expressly permitted by

the terms of said license.

IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATASTORED OR USED WITHTHE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Manual Revision 1.0d

Release Date: 14 July, 2011

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It

provides information for the installation and use of the A+ SERVER 1042G-TF.

Installation and maintenance should be performed by experienced technicians

only.

The A+ SERVER 1042G-TF is a 1U rackmount server based on the

SC818TS-1400LPBP server chassis and the Super H8QGi+-F serverboards.

Manual Organization

Chapter 1: Introduction

The ﬁrst chapter provides a checklist of the main components included with the

server system and describes the main features of the Super H8QGi+-F serverboard

and the SC818TS-1400LPBP chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to install theA+ SERVER 1042G-TF into

a rack and check out the server conﬁguration prior to powering up the system. If your

server was ordered without the processor and memory components, this chapter will

refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer to this chapter for details on the system interface, which includes the functions

and information provided by the control panel on the chassis as well as other LEDs

located throughout the system.

Chapter 4: System Safety

You should thoroughly familiarize yourself with this chapter for a general overview

of safety precautions that should be followed when installing and servicing the A+

SERVER 1042G-TF.

Chapter 5: Advanced Serverboard Setup

Chapter 5 provides detailed information on the H8QGi+-F serverboard, including the

locations and functions of connectors, headers and jumpers. Refer to this chapter

when adding or removing processors or main memory and when reconﬁguring the

serverboard.

iii

Preface

A+ SERVER 1042G-TF User's Manual

Chapter 6: Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the SC818TS-1400LPBP 1U

rackmount server chassis. You should follow the procedures given in this chapter

when installing, removing or reconﬁguring SATA or peripheral drives and when

replacing system power supply units and cooling fans.

Chapter 7: BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed information

on running the CMOS Setup Utility.

Appendix A: BIOS Error Beep Codes

Appendix B: Installing Windows

Appendix C: System Speciﬁcations

Preface

Notes

A+ SERVER 1042G-TF User's Manual

Table of Contents

Chapter 1 Introduction

1-1 Overview .........................................................................................................1-1

1-2 Serverboard Features..................................................................................... 1-2

Processors ......................................................................................................1-2

Memory ...........................................................................................................1-2

Serial ATA........................................................................................................ 1-2

PCI Expansion Slots....................................................................................... 1-2

Ethernet Ports................................................................................................. 1-2

Onboard Controllers/Ports .............................................................................. 1-2

Graphics Controller......................................................................................... 1-3

Other Features................................................................................................1-3

1-3 Server Chassis Features ................................................................................1-4

System Power................................................................................................. 1-4

SATA Subsystem.............................................................................................1-4

Front Control Panel......................................................................................... 1-4

Cooling System...............................................................................................1-4

1-4 Contacting Supermicro....................................................................................1-5

Chapter 2 Server Installation

2-1 Overview .........................................................................................................2-1

2-2 Unpacking the System.................................................................................... 2-1

2-3 Preparing for Setup......................................................................................... 2-1

Choosing a Setup Location............................................................................. 2-1

Rack Precautions............................................................................................ 2-2

Server Precautions..........................................................................................2-2

Rack Mounting Considerations....................................................................... 2-3

Ambient Operating Temperature................................................................2-3

Reduced Airﬂow .........................................................................................2-3

Mechanical Loading ................................................................................... 2-3

Circuit Overloading..................................................................................... 2-3

Reliable Ground ......................................................................................... 2-3

2-4 Installing the System into a Rack ...................................................................2-4

Identifying the Sections of the Rack Rails......................................................2-4

Installing the Inner Rail Extensions ................................................................2-5

Assembling the Outer Rails............................................................................2-6

Installing the Outer Rails onto the Rack.........................................................2-7

Installing the Server into a Telco Rack...........................................................2-9

vii

Table of Contents

2-5 Checking the Serverboard Setup.................................................................. 2-10

2-6 Checking the Drive Bay Setup.......................................................................2-11

Chapter 3 System Interface

3-1 Overview .........................................................................................................3-1

3-2 Control Panel Buttons..................................................................................... 3-1

Reset............................................................................................................... 3-1

Power.............................................................................................................. 3-1

3-3 Control Panel LEDs ........................................................................................3-2

NIC2................................................................................................................ 3-2

NIC1................................................................................................................ 3-2

HDD................................................................................................................. 3-2

Power.............................................................................................................. 3-2

3-4 SATA Drive Carrier LEDs................................................................................ 3-3

Chapter 4 System Safety

4-1 Electrical Safety Precautions..........................................................................4-1

4-2 General Safety Precautions............................................................................ 4-2

4-3 ESD Precautions............................................................................................. 4-3

4-4 Operating Precautions .................................................................................... 4-4

Chapter 5 Advanced Serverboard Setup

5-1 Handling the Serverboard............................................................................... 5-1

Precautions .....................................................................................................5-1

Unpacking .......................................................................................................5-2

5-2 I/O Port and Control Panel Connections ........................................................5-2

Front Control Panel......................................................................................... 5-3

5-3 Processor and Heatsink Installation................................................................5-3

Installing a Passive CPU Heatsink .................................................................5-6

Removing the Heatsink...................................................................................5-6

5-4 Installing Memory............................................................................................5-7

DIMM Module Population Conﬁguration .................................................... 5-9

5-5 PCI Expansion Cards.................................................................................... 5-10

5-6 Serverboard Details .......................................................................................5-11

H8QGi+-F Quick Reference.......................................................................... 5-12

5-7 Connector Deﬁnitions ...................................................................................5-13

5-8 Jumper Settings............................................................................................ 5-19

Explanation of Jumpers ................................................................................5-19

5-9 Onboard Indicators........................................................................................5-21

5-10 SAS and SATA Drive Connections ............................................................... 5-22

5-11 Enabling SATA RAID..................................................................................... 5-23

viii

A+ SERVER 1042G-TF User's Manual

Serial ATA (SATA)..........................................................................................5-23

Installing the OS/SATA Driver....................................................................... 5-23

Building a Driver Diskette.........................................................................5-23

Enabling SATA RAID in the BIOS.................................................................5-24

Using the Adaptec RAID Utility..................................................................... 5-25

Installing the RAID Driver During OS Installation......................................... 5-25

5-12 Installing Drivers............................................................................................ 5-26

Supero Doctor III........................................................................................... 5-27

Chapter 6 Advanced Chassis Setup

6-1 Static-Sensitive Devices..................................................................................6-1

Precautions .....................................................................................................6-1

6-2 Control Panel .................................................................................................. 6-2

6-3 System Cooling...............................................................................................6-2

System Fan Failure......................................................................................... 6-3

6-4 Drive Bay Installation/Removal.......................................................................6-4

Accessing the Drive Bays............................................................................... 6-4

Peripheral Drive Installation............................................................................ 6-7

6-5 Installing the Air Shroud..................................................................................6-8

Checking the Air Flow..................................................................................... 6-8

6-6 Power Supply................................................................................................ 6-10

Power Supply Failure.................................................................................... 6-10

Chapter 7 BIOS

7-1 Introduction...................................................................................................... 7-1

7-2 Main Menu ...................................................................................................... 7-2

7-3 Advanced Settings Menu................................................................................ 7-2

7-4 Security Settings Menu................................................................................. 7-12

7-5 Boot Settings Menu.......................................................................................7-13

7-6 Exit Menu......................................................................................................7-14

Appendix A BIOS Error Beep Codes

Appendix B Installing Windows

B-1 Installing Windows to a RAID System............................................................B-1

B-2 Installing Windows to a Non-RAID System ....................................................B-2

Appendix C System Speciﬁcations

Chapter 1

Introduction

1-1 Overview

The A+ SERVER 1042G-TF is a 1U server comprised of the SC818TS-1400LPBP

chassis and one H8QGi+-F serverboards. Please refer to our web site for

information on operating systems that have been certiﬁed for use with the server

(www.supermicro.com).

In addition to the serverboard and chassis, various hardware components may have

been included with the system, as listed below.

One (1) mini-SATA to USB adapter for slim DVD (CDM-USATA-G-O-P)•

One (1) slim SATA DVD kit (MCP-220-81502-0N)•

Four (4) 1U passive CPU heatsinks for AMD Socket G34 (SNK-P0042P)•

Six 4-cm counter-rotating fans (FAN-0111L4)•

SATA Accessories:•

Three (3) hard drive carriers (MCP-220-00001-01)

One (1) internal HDD backplane (BPN-SAS-818TQ)

One (1) 40-cm 8pin to 8pin ribbon cable with tube SGPIO cable (CBL-0157L)

Three (3) 48CM SATA round cable sets (CBL-0206L)

One (1) 70-cm, internal USB cable for slim USB DVD-ROM (CBL-0341L)

One (1) PCI Express x16 riser card (RSC-RR1U-E16)•

Rackmount kit (MCP-290-00062-0N)•

One CD containing drivers and utilities•

Chapter 1: Introduction

1-1

1-2

A+ SERVER 1042G-TF User's Manual

1-2 Serverboard Features

At the heart of the A+ SERVER 1042G-TF is one H8QGi+-F quad processor

serverboard, which is based on the AMD SR5690/SP5100 chipset.

Below are the main features of the serverboards.

Processors

The H8QGi+-F supports four AMD Opteron 6100 series (AMD Socket G34)

processors. Please refer to our web site for a complete listing of supported

processors (www.supermicro.com).

Memory

TheH8QGi+-Fhas thirty-two(32) single/dual/tri/quadchannelDIMM slotssupporting

up to 128 GB of ECC/Non-ECC UDIMM or up to 512 GB of ECC RDIMM

DDR3-1333/1066/800 SDRAM. See Chapter 5 Section 6 for more details on

installing memory into the system.

Serial ATA

The South Bridge (SP5100) of the chipset includes a Serial ATA controller for six

3 Gb/s SATA drives. The hot-swappable SATA drives are connected to a backplane

that provides power, bus termination and conﬁguration settings. RAID 0 and 1 are

supported. Refer to the support area of our web site for procedures on setting up

RAID on your system.

PCI Expansion Slots

The H8QGi+-F board has one PCI Express 2.0 x16 slot.

Ethernet Ports

An Intel® network controller is integrated into each of the serverboards to support

two Gigabit LAN ports (100/1000Base-T/1000BaseTX, RJ45 output).

Onboard Controllers/Ports

Onboard I/O backpanel ports on the serverboard include one COM port, a VGAport,

two USB ports, a dedicated IPMI LAN port and two Gigabit LAN (NIC) ports.

Inhaltsverzeichnis

Andere Supermicro Server Handbücher

Supermicro

Supermicro 8050 Bedienungsanleitung

Supermicro

Supermicro SuperServer 1028GR-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9A-4CN10P Bedienungsanleitung

Supermicro

Supermicro A+ SERVER 1012C-MRF Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 8045C-3R Bedienungsanleitung

Supermicro

Supermicro X13SRA-TF Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019C-MHN2 Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019A-12TN4 Bedienungsanleitung

Supermicro

Supermicro SuperServer 4027GR-TR Bedienungsanleitung

Supermicro

Supermicro SuperServer E300-9D-4CN8TP Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 1028R-WC1R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-220GP-TNR Bedienungsanleitung

Supermicro

Supermicro AS-2020A-8R Bedienungsanleitung

Supermicro

Supermicro SuperServer SYS-221HE-FTNR Bedienungsanleitung

Supermicro

Supermicro AS-4124GS-TNR Bedienungsanleitung

Supermicro

Supermicro SuperBlade SBS-820H-420P Bedienungsanleitung

Supermicro

Supermicro 8060 Bedienungsanleitung

Supermicro

Supermicro Altus 1804i Kurzanleitung

Supermicro

Supermicro SuperServer 8048B-TRFT Bedienungsanleitung

Supermicro

Supermicro SuperServer 6019P-WT Bedienungsanleitung

Supermicro

Supermicro SUPERO SuperServer 1018L-MP Bedienungsanleitung

Supermicro

Supermicro SuperServer 5019S-MN4 Bedienungsanleitung

Supermicro

Supermicro A+ AS-1125HS-TNR Bedienungsanleitung

Supermicro

Supermicro SUPERSERVER 6014H-32 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung