Swann QH48 Bedienungsanleitung
1
DVR Quick Start Guide
• Getting to know your DVR
• What does this mean?
• Connect your Cameras
• Connect the DVR to your Home Network
• Connect the Mouse
• Connect the DVR to your HDTV
• Connect the DVR to your Monitor (optional)
• Connect the Power Adapter
QH48_1575250815E | © Swann 2015
Welcome! Lets get started.
READ ME
FIRST
4
Congratulations on the purchase of your Swann DVR. This quick start guide will assist you on getting your DVR up and
running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent
installation, to make sure nothing was damaged during shipping. On the other side is a detailed connection map which
illustrates the various connections on the DVR.
Getting to know your DVR
2
1) Video In
2) VGA
3) HDMI
4) Audio In
5) Audio Out
6) LAN
7) USB
8) Power Input
9) Power LED
10) Hard Drive LED
11) Network LED
1
2
3
4
5
6
7
8
VGA ININININ
OUT
AUDIOVIDEO IN LAN & USB 12V
13 5 7 8
2 4 6
9
11
10
7
Here are explanations for the various connections and
lights on the DVR -
1) Video In - Connect the included cameras here.
2) VGA (optional) - If you have a digital TV or a monitor
with a VGA connection, connect this to an available input.
3) HDMI - Connect this to your digital TV with a HDMI input
(HDMI cable included).
4) Audio In - For connecting a microphone or some other
audio device.
5) Audio Out - For connecting speakers.
6) LAN - Connect this to your home network so your DVR
can connect to the Internet.
7) USB - Connect the mouse here. Also able to connect
a storage device such as a USB flash drive to back up
recorded events or to perform a firmware upgrade.
8) Power Input - This is where you connect the power
adapter.
9) Power LED - This indicates the DVR has power.
10) Hard Drive LED - This will flash when the hard drive
is working.
11) Network LED - This will flash when there is network
activity.
What does this mean?
3
Look out for the light bulb icon, as this provides
information on the operation of your DVR.
24
Connect your Cameras 1
1. Connect the Video Output and
Power Input connections on the
camera to the corresponding
connections on the supplied Video
& Power Cable.
2. Connect the supplied Power
Splitter to the power input on the
Video & Power Cable. Repeat
the above steps for each camera
included with your DVR.
3. Connect the supplied Power
Adapter to the other end of the
Power Splitter then connect the
Power Adapter to a spare wall
socket. Press the wall socket’s
switch to the on position to supply
power to the cameras.
2 3
Power Adapter
Power Input
Video Output
1
Twist to lock
video connectors
Video Input
Video & Power Cable
Connect this to the DVR
Power Splitter
connects here
Power Output
Power Adapter
connects here
Power Splitter
Video & Power Cable
connects here
Connect to a spare
wall socket
1
2
3
4
5
6
7
8
VGA ININININ
OUT
AUDIOVIDEO IN LAN & USB 12V
5
Connect the supplied Ethernet cable (1) to the LAN connection on the DVR then connect the other end to a spare port
on your router or wireless access point. The Ethernet cable is the same at both ends.
It’s important that you do this as this allows you to access the DVR from your mobile device and to send you email
notifications. It also allows the DVR to connect to the Internet to update its internal clock.
Connect the DVR to your Home Network 2
5
1
2
3
4
5
6
7
8
VGA ININININ
OUT
AUDIOVIDEO IN LAN & USB 12V
USB Inte rne t 432
1
8
Connect the supplied mouse (1) to one of the available USB ports. You can connect a USB storage device such as a
flash drive to the other port, to back up your video recordings and to perform a firmware upgrade.
Connect the Mouse 3
6
Please note, Bluetooth and wireless mice and trackpad devices are not supported. Not all USB storage devices
are supported.
1
2
3
4
5
6
7
8
VGA ININININ
OUT
AUDIOVIDEO IN LAN & USB 12V
1
3
Connect the supplied HDMI cable to the HDMI output on the DVR then connect the other end to a spare HDMI input (1)
on your HDTV. Make sure the video input on the HDTV matches the physical connection used to connect the DVR.
Connect the DVR to your HDTV 4
7
HDMI IN 2
HDMI IN 1
1
1
2
3
4
5
6
7
8
VGA ININININ
OUT
AUDIOVIDEO IN LAN & USB 12V
6
If you have a Monitor with a VGA connection, connect a VGA cable (not supplied) to the VGA output on the DVR then
connect the other end to the VGA input (1) on your Monitor.
Connect the DVR to your Monitor (optional) 5
8
A VGA cable and monitor
are not required when
using the HDMI cable.
1
1
2
3
4
5
6
7
8
VGA ININININ
OUT
AUDIOVIDEO IN LAN & USB 12V
9
Connect the supplied power adapter’s power connection (1) to the power input on the DVR first (this will minimise
sparking) then connect the power adapter to a spare wall socket.
All the connections have now been completed. You’re now ready to run through “The Setup Wizard” quick start guide
to configure the DVR.
Connect the Power Adapter 6
9
1
1
2
3
4
5
6
7
8
VGA ININININ
OUT
AUDIOVIDEO IN LAN & USB 12V
Andere Handbücher für QH48
1
Inhaltsverzeichnis
Andere Swann DVR Handbücher
Swann
Swann DVR4-1000 Bedienungsanleitung
Swann
Swann DVR4-8500AI Bedienungsanleitung
Swann
Swann FlashlightDVR SW244-TDV Bedienungsanleitung
Swann
Swann SW-R-DVR4 Bedienungsanleitung
Swann
Swann DVR4-2500 Bedienungsanleitung
Swann
Swann DVRX-1550 Bedienungsanleitung
Swann
Swann DVR8-Net-Plus Bedienungsanleitung
Swann
Swann Alpha D01 Bedienungsanleitung
Swann
Swann DVR16-8500AI SW243-X6G Bedienungsanleitung
Swann
Swann DVR4-5500TM Bedienungsanleitung
Swann
Swann dvr8-4600 Bedienungsanleitung
Swann
Swann BlueAlert SW242-WDV Bedienungsanleitung
Swann
Swann DVR4-1160 Bedienungsanleitung
Swann
Swann D02C5 Bedienungsanleitung
Swann
Swann 4-4350 Bedienungsanleitung
Swann
Swann DVR4-5100 Kurzanleitung
Swann
Swann S243-8NU-1111 Bedienungsanleitung
Swann
Swann PRO-series Bedienungsanleitung
Swann
Swann DVR8-2500 Bedienungsanleitung
Swann
Swann DVR16-4550 Bedienungsanleitung
