Teledyne Lecroy Everywhereyoulook SierraNet M168 Bedienungsanleitung

Introduction

The SierraNet M168 is Teledyne LeCroy's 10 Gigabit Ethernet and 16 Gigabit Fibre Channel Analyzer and Jammer

platform. It has eight SFP+ 10 GigE / 16G FC ports. Up to 64 GB of capture memory allows for capturing of extensive

line-speed data.

The SierraNet M168 ports allow signals to pass through without re-timing, ensuring that the test platform is as transparent

as possible. The analyzer can be controlled either via a one (1) Gigabit Ethernet connection to the local network or via a

USB connection. The SierraNet M168 provides the user with easy-to-understand control panel and LED indicators.

Major features of the M168 include triggering on back-to-back events, use of counters within trigger conditions, and

multi-state (up to 24) triggering and filtering state machines with four transitions per state.

The Net Protocol Suite software for controlling the analyzer and displaying the captured data installs on the latest

Microsoft® Windows®. See the Readme file for the latest information on host-machine requirements.

Components

The analyzer package includes the following components:

SierraNet M168 Analysis platform

USB 3.0 cable, 1 meter

USB 2.0 cable, 1.8 meter

1 Gigabit Ethernet cable, 10 feet

Three prong AC power cord

C13-C14 10A power cord, 2 meter

Installation DVD-ROM with software and documenta-

tion

Unpacking the Analyzer

Inspect the received shipping container for any damage. Unpack the container and account for each of the system

components listed on the accompanying packing list. Visually inspect each component for absence of damage.

In the event of damage, notify the shipper and Teledyne LeCroy. Retain all shipping materials for shipper’s inspection.

SierraNet M168 Protocol Analyzer

Please see the SierraNet M168 User Manual on the installation DVD-ROM for component specifications and further

SierraNet™ M168

Quick Start

Before Starting

Use this document for quick installation and setup. If you

experience problems or need more information, see the

SierraNet M168 User Manual on the Installation DVD-ROM or at

the Teledyne LeCroy web site. For details about the latest

software version, see the Readme file on the

Installation DVD-ROM.

Front Panel Description

Features

The Analyzer has the following features on the front:

[1] LED Indicators for P1-P4 and P5-P8 for Speed, Link and

Status:

Speed LEDs

The LEDs for SPEED illuminate as follows:

GBE Fibre Channel

Yellow Reserved 4G/2G/1G FC

Green 10 GigE 8G FC

Blue N/A 16G FC

Link Activity LEDs

Green Network activity Detected

Yellow Link up, no activity

No Color No link

Status LEDs

Yellow Blinking Waiting for trigger

Yellow Solid Triggered

Red Error detected

No Color No Activity

Please see the SierraNet M168 User Manual for details on

the Speed, Link and Status LEDs.

[2] Power Switch

[3] Status and Configuration LCD Display

[4] Front Panel 5-Buttons keypad

[5] SFP+ 10 GigE / FC connectors for ports 1-4

[6] SFP+ 10 GigE / FC connectors for ports 5-8

[7] External Trigger Input (Trigger In)

[8] External Trigger Output (Trigger Out)

[9] USB Port for host connectivity

[10] Ethernet Port for network connectivity

23 896

1057

111

Front Panel Buttons

The following parameters can be viewed and/or configured directly on the front panel, using the display and 5 button keypad:

Installing the Software

1. Insert the Installation DVD-ROM into the DVD drive on the host machine. The installation automatically starts setup,

unless Auto Run is off. In that case, select the DVD-ROM from “My Computer” and click Setup. Follow the instructions

to complete the installation.

Note: If you get an error message during installation of the drivers, consult your system administrator.

- Display of IP address

- Display of model name: “SierraNet M168”

- Connection status

- Display of unit name

- IP configuration

• IP mode dynamic, or

• IP mode static

Rear Panel Description Expansion Slot

The analyzer expansion slot at the back of the SierraNet M168

system can accommodate the SYNC Expansion Card that can be

used to daisy-chain multiple analysis systems.

Note: Do not open the enclosure except for adding expansion

cards. No user serviceable parts are inside.

Starting the Application

To launch the software, select Start > All Programs > LeCroy > Net Protocol Suite.

Select Menu > Setup > Device Management (see screen capture on the right) to display

the Device Management dialog. Click Refresh Device List (see screen captures below) to

display all the devices on the network. Select a device and click Connect.

To start using the protocol analyzer and software, see the Protocol Analyzer chapter of the SierraNet M168 User Manual.

Setting Up and Connecting

Note: You must install the software before connecting the

analyzer to the host machine for the first time.

To set up the analyzer:

1. Connect the analyzer to a 100V–240V, 50Hz–60Hz,

power outlet and turn on the Power switch.

At power on, the analyzer will go through initialization

as shown on the LCD display.

2. Connect the USB cable between the SierraNet M168

USB port and a USB port on the host machine. The

host machine operating system detects the analyzer

and loads the driver files. (See Section 10 for how to

connect via Ethernet.)

3. Connect your devices using SFP+ optics and a fiber

cable suitable for your setup.

4. Connect the Ethernet or Fibre Channel devices to port

pairs P1/P2, P3/P4, P5/P6 and/or P7/P8.

For an illustration of the cabling, see the Introduction

chapter of the SierraNet M168 User Manual.

Teledyne LeCroy Customer Support

Online Download

Periodically check the Teledyne LeCroy Protocol Solutions web

site for software updates and other support related to this product.

Web: teledynelecroy.com/tm/software/PSG

E-mail: [email protected]

Support: teledynelecroy.com/support/contact

Trademarks and Servicemarks

LeCroy and SierraNet M168 are trademarks of Teledyne LeCroy.

Microsoft and Windows are registered trademarks of Microsoft Inc.

All other trademarks are property of their respective companies.

Changes

Product specifications are subject to change without notice.

Teledyne LeCroy reserves the right to revise the information in this

document without notice or penalty.

This document may be printed and reproduced without additional permission, but all copies should contain this copyright notice.

Operating the SierraNet M168 System

It is recommended that you read the SierraNet M168 User Manual before operating the system, to get familiar with the

capabilities and settings. The default capture mode is ‘Easy Mode’ on the Analyzer's Triggering/Filtering Settings.

Getting Started with Protocol Analysis

To use the SierraNet M168 software for protocol analysis, select File > New Project for a new protocol analyzer project or

open one of the sample projects from the Examples folder (look for a .gep file).

Connecting the Platform to the Host Machine via Ethernet

The SierraNet M168 platform can be connected to the host machine by using either a USB cable (as described in Section

8) or by using a1 GbE connection as described below.

Connecting via Ethernet

To connect to the Ethernet network, the Sierra M168 must be assigned an IP address. The IP address can be assigned

automatically, if the network has a DHCP server, or assigned manually using either the front-panel keypad and display or

the Net Protocol Suite software.

IP Address Configuration

The IP address can be configured either via the front panel buttons or using the application when the analyzer is connected

to the host machine via a USB cable.

When connected to a network, the analyzer can communicate with the DHCP server in order to obtain its IP address

configuration.

Once the IP Address is configured, the SierraNet M168 analyzer is automatically detected by the application if the analyzer

and the host machine on which the application is running are on the same Ethernet subnet. A list of all available units are

displayed in the Find Devices dialog.

If the analyzer and the host machine are located on different subnets then the IP address of the analyzer needs to be

configured manually in the application: Use the Add Device feature by clickling the Add Device button in the Select Device

window.

LCD Display

Andere Teledyne Lecroy Messgerät Handbücher

Teledyne Lecroy

Teledyne Lecroy PCI Express Gen 4x8 OCuLink Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP006D Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP009 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP026-1 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy MDA800A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PP011-1 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy HVFO103 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline 802.11 Montageanleitung

Teledyne Lecroy

Teledyne Lecroy Everywhereyoulook DL02-HCM Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy 980 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy AP015 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy RP2060 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline SD Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy DXC100A Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy WaveAce Lab 3 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy USB Advisor T3 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Frontline Sodera LE Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy SierraNet M328 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy ADP300 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy Quantumdata 780E Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy PCI Express 5.0 U.2 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy CP150 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy ZD500 Bedienungsanleitung

Teledyne Lecroy

Teledyne Lecroy AP033 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung