Tenmars TM-190 Bedienungsanleitung
1
MULTI-FIELD EMF METER
TM-190
User’s Manual
HB2TM1900003
2
Meun
1 Features..............................................3
2 Identifying Parts..................................5
3 TFT description...................................6
4 Measurement Procedures ..................7
4.1 POWER ON/OFF BUTTON: .................... 7
4.2 READING DATA: ...................................... 7
4.3 DATA HOLD (HOLD):............................... 7
4.4 MENU SETTINGS:.................................... 8
4.4.1. Option Buttons:........................9
4.4.2. Screen Brightness options: .....9
4.4.3. Magnetic Unit: .........................9
4.4.4. RF Strength Unit：................10
4.4.5. Language: .............................11
4.4.6. Power Off Time:.....................12
4.4.7. Sound on/off:.........................13
4.4.8. Keys/Alarm Sound:................13
4.4.9. Keys Sound:..........................14
4.4.10. Alarm Sound:.........................14
4.4.11. Information: ...........................15
5 Specifications....................................16
5.1 SENSOR TYPE: LF MAGNETIC FIELDS (MF). 16
5.2 SENSOR TYPE: LF ELECTRIC FIELDS............ 16
5.3 SENSOR TYPE: RF STRENGTH ................... 17
6 Battery replacement..........................18
7 Safety and maintenance standards ..19
8 End of life..........................................19
TM-190
3
1 Features
Data hold (HOLD)
Low battery indication：HIGH LOW
Over load display “OL”.
External USB Power Supply: ” ”
Brightness options: low-Middle-high
Magnetic unit：Gauss(mG) or. Tesla(uT)
RF Strength Unit: (uW/m² ~mW/m²) (μW/cm²) (m
V/m ~V/m) (mA/m) (dBm).
Languages: English; Traditional Chinese;
Simplified Chinese; Japanese; Español.
Power Off Time：No; 1; 3; 5; 10; 15; 30. Factory
default sets as “5”. Settings can be changed by
the user. is displayed on the screen after
power off time is set.
Keys/Alarm Sounds: On ; Off
Low-Frequency EMF Readings: Individual and
aggregated XYZ axial readings .
RF Historical Records:
Up to 20 groups .
Information: Software version: V1.0
High-frequency EMF Readings: Please perform
tests according to the indicated direction .
TM-190 English
4
Electric field Measurement Precautions: Please
perform tests according to the indicated direction
. Please hold the meter at the bottom
of the display, as shown in the figure below:
Fig. 1 Electric Field measurement:
The color zones are for reference only
electromagnetic safety reference standard
1W/m²=0.1mW/Cm²=100uW/Cm².1mW/m²=0.1u
W/Cm²
Ma g n e tic Fie lds Electric Field RF stren g th
Th e Green zone 0~10.00mG 0~500V/m 0~0.99mW/m²;0~0.59V/m
Th e Ye llo w z o n e 10.01~100mG 501~1000V/m 1~9.99mW/m²;0.6~1.9V/m
Th e Re d z o n e 101~2000mG >1001V/m >10mW/m²;>2V/m
international國際的 Council Recommendation1999/519/EC 42V/m(4.75W/m²) 59V/m(9.25W/m²)
international國際的 ICNIRP Guidelines,April1998 42V/m(4.75W/m²) 59V/m(9.25W/m²)
Austria 奧地利 ONORM S1120 49V/m(6.33W/m²) 61V/m(10W/m²)
Belgium比利時 Belgisch Staatsblad F.2001-1365 21V/m(1.18W/m²) 30V/m(2.31W/m²)
Germang 德國 26.Deutsche Verordnung 42V/m(4.75W/m²) 59V/m(9.25W/m²)
italy意大利 Decreto n.381,1998 20V/m(1W/m²) 20V/m(1W/m²)
the netherlands荷蘭 Health Council 51V/m(6.92W/m²) 83V/m(18W/m²)
switzerland瑞士 Verordnung 1999 4V/m(0.04W/m²) 6V/m(0.1W/m²)
united states美國 IEEE C95.1 49V/m(6.33W/m²) 68V/m(12W/m²)
china中國 Draft:National Quality Technology Monitoring Bureau 49V/m(6.33W/m²) 61V/m(10W/m²)
japan日本 Radio-Radiadiation Protection Guidelines,1990 49V/m(6.33W/m²) 61V/m(10W/m²)
TM-190
5
2 Identifying Parts
Fig. 2 Instrument description:
1.
2.4” 240*320 resolution color TFT.
2. Power and Menu button
3. Hold and Enter button
4. Select and Down button
5. Battery cover
TM-190
6
3 TFT description
1 Data Hold indicator.
2 Auto power off indicator.
3 Buzzer indicator.
4 Battery indicator.
5 Tesla(uT) or Gauss(mG) display.
6 Electric Field (V/m) display.
7 RF strength history histogram display.
8 RF strength digital (mV/m/ W/m²/μW/cm²/dB)
display.
9 Menu key indication
10 Hold/ Enter key indicator
11 RF electronic field warning indicator
12 LF electric field warning indicator
13 Individual XYZ axial value of LF electromagnetic
wave display
14 LF electromagnetic wave warning indicator’
TM-190
7
4 Measurement Procedures
4.1 POWER ON/OFF Button:
Press button to power on. LCD display
measurement screen.(see Fig. 3)
Press button for 3 seconds to power off LCD
display.
4.2 Reading Data:
Direct the front section of the meter at the desired
electromagnetic field for measurements.
The meter simultaneously displays the electromagnetic
field readings of individual and aggregated XYZ axes,
where the aggregated calculation equation can be
expressed as follows:
Because of environment-related magnetic field factors,
this electromagnetic field EMF meter may display a
reading of under 0.50 mG prior to testing. This is caused
by the magnetic noise in the environment, rather than
meter failure.
4.3 Data hold (HOLD):
Press the left button as to activate the HOLD
function and hold the current readings at the upper left
of the display.
To release the held data, press the left button
again.
Press the middle button for 3 seconds to power off
TM-190
8
the meter.
4.4 Menu Settings:
On the measurement screen: Press the middle
button to enter the main menu, where 7 options can be
selected, namely, Brightness,Magnetic unit, RF
Strength Unit,Language,Power off,Sound, and
Information.
Press the right button to make the blue brick
scroll down. Press the right button repeatedly,
and the blue brick will cycle through the options.
Press the left button to enter the selected option.
Press the left button again to exit the selected
option and return to the main menu.
Press the middle button to return to the previous
menu.
TM-190
9
4.4.1.Option Buttons:
Press the right button to scroll to and check
the next check box. Press the right button
repeatedly to cycle through the check boxes.
Press the left button to exit to the main menu.
Press the middle button to return to the previous
setting menu.
4.4.2.Screen Brightness options:
Following the operation procedures in 4.4, the
Brightness setting comprises the following three
options, namely, Low,Middle, and High. Under the
sub-directory, use the option buttons to select and
confirm the desired selection.
Default: Middle
4.4.3.Magnetic Unit:
Following the operation procedures in 4.4, the Magnetic
Unitsetting comprises the following two options, namely,
Gauss/mG and Tesla/uT. Under the sub-directory, use the
option buttons to select and confirm the desired selection.
TM-190
10
Default: mG
4.4.4.RF Strength Unit：
Following the operation procedures in 4.4, the RF
Strength Unit setting comprises the following five
options, namely, µW/m²~mW/m², µW/cm², mV/m~V/m,
mA/m, and dBm (files are automatically skipped within
the selected unit). Under the sub-directory, use the option
buttons to select and confirm the desired selection.
Default: µV/m² ~ mW/m²
Andere Handbücher für TM-190
2
Inhaltsverzeichnis
Andere Tenmars Messgerät Handbücher
Tenmars
Tenmars TM201 Bedienungsanleitung
Tenmars
Tenmars TM-730 Bedienungsanleitung
Tenmars
Tenmars ST-109R Bedienungsanleitung
Tenmars
Tenmars TM-215 Bedienungsanleitung
Tenmars
Tenmars ST-109R Bedienungsanleitung
Tenmars
Tenmars TM-188 Bedienungsanleitung
Tenmars
Tenmars TM-185 Bedienungsanleitung
Tenmars
Tenmars TM-183N Bedienungsanleitung
Tenmars
Tenmars TM-508A Bedienungsanleitung
Tenmars
Tenmars TM-213 Bedienungsanleitung
Tenmars
Tenmars TM-102 Bedienungsanleitung
Tenmars
Tenmars TM-412 Bedienungsanleitung
Tenmars
Tenmars TRIAXIAL ELF Bedienungsanleitung
Tenmars
Tenmars TM-1016 Bedienungsanleitung
Tenmars
Tenmars TM- 4100N Bedienungsanleitung
Tenmars
Tenmars TM 191 Bedienungsanleitung
Tenmars
Tenmars TM-186 Bedienungsanleitung
Tenmars
Tenmars ST-141 Bedienungsanleitung
Tenmars
Tenmars TM-196 Bedienungsanleitung
Tenmars
Tenmars TM-188 Bedienungsanleitung
