Tenmars TM-183N Bedienungsanleitung

TM-183N

Temperature/Humidity Meter

User’s Manual

HB2TM183N000

Contents 
1Introduction......................................................1 
2Accessories .....................................................1 
3Safety Precaution.............................................1 
4Instrument Description.....................................2 
5Operation.........................................................3 
5.1 Temperature Unit Switch:.............................3 
5.2 Data Hold:....................................................3 
5.3 Maximum/Minimun Read Value 
Lock(MAX/MIN):.........................................4 
5.4 Backlight :....................................................5 
5.5 Temperature/Dew Point/Wet Bulb/Relative 
Humidity Switch:.........................................5 
5.6 Relative Value (REL):...................................5 
5.7 Manual Recording:.......................................6 
5.8 Read Data Recorded in Memory:.................6 
5.9 Setting mode:...............................................8 
6General Specifications ...................................14 
7Electrical Specification ...................................15 
7.1 Temperature:..............................................15 
7.2 Humidity:....................................................15 
8Maintenance or Repair...................................16 
9Battery Replacement .....................................16 
10 Product Disposal............................................17 
 

TM-183N

1 Introduction

This meter uses precision capacitive humidity

sensor and NTC temperature sensor designs.

2 Accessories

1 Meter

1 Temperature and Humidity probe

1 9V battery

1 Carrying case

1 User’s Manual

3 Safety Precaution

Note! Please refer to this manual.

Improper use may damage the meter

and its components.

Complies with European Directive.

⚫Do not operate in environments with flammable gas

or humid environments.

⚫Operating altitude: up to 2000M.

⚫Operating environment: Indoor use;Pollution degree2.

⚫Clean with soft cloth when dirty, such as glasses cloth.

Do not clean with chemicals and other solvents.

⚫EMC: EN61326-1:CISPR 11:Group 1, Class B

Class B –Equipment for use in all

establishments other than domestic.

Group 1 –RF energy generated is needed for

internal functioning.

TM-183N

4 Instrument Description

1. Temperature/humidity probe input terminal

2. LCD display

3. On/off button

4. Backlight and setting downwards button

5. HOLD and setting upwards button

6. Relative value/alarm setting/time display switch

button

7. Maximum/minimum value and read record button

8. Dew point/wet bulb/temperature/relative humidity

switch

9. Switches between the ℃or ℉temperature unit

and saves record

10.Temperature and Humidity probe

11.Temperature and Humidity probe connector

TM-183N

5 Operation

1. Connect the temperature/humidity probe onto this

meter.

2. Press the button to turn on/off and it will show

full display for 0.5 seconds. Then, display the

program version for 0.5 seconds, and then enter

measuring mode.

3. Please connect the probe before powering on, or

else it will display wrong values.

5.1 Temperature Unit Switch:

Press and hold the button and then press

the button to switch between the temperature units.

5.2 Data Hold:

Press the button to and on/off data hold “HOLD”

symbol will be displayed on the LCD.

TM-183N

5.3 Maximum/Minimun Read Value Lock(MAX/MIN):

Under measurement mode, press the button for less than

1 second to enter MAX/MIN mode and start timing. The main

display area displays the currently tested temperature and the

secondary display area displays the recording time.

Under MAX/MIN mode, press the button repeatedly for

less than 1 second and the main display area of the LCD will

display the currently tested MAX→MIN values in cycle.

Under MAX/MIN mode, press the button repeatedly and

the main display area of the LCD will display ℃

→%RH→WET→DEW in this order.

Under MAX/MIN mode, press the button for over 1 second

to exit MAX/MIN mode.

TM-183N

5.4 Backlight :

Press the button to turn the backlight on or off. The backlight

will automatically turn off after 15 seconds.

5.5 Temperature/Dew Point/Wet Bulb/Relative

Humidity Switch:

Under measurement mode, press the button to switch

between dew point measurement →wet bulb measurement →

relative humidity measurement in this order.

5.6 Relative Value (REL):

Under measurement mode, press the button for less than 1

second to enable or disable the REL function. When the REL

function is enabled, the thermometer and hygrometer will record

the current read value and the LCD display will be reset to zero.

The thermometer and hygrometer will use this read value as the

reference value and deducted from the measured values

afterwards.

TM-183N

5.7 Manual Recording:

Press the button and the text REC will be displayed on the LCD. It

will also record the currently displayed data into memory.

5.8 Read Data Recorded in Memory:

Press and hold the button and then press the button to

enter read recorded data in memory mode.

Press the button or button to read other recorded data.

Press the button to change the temperature unit.

TM-183N

Press the button to change the displayed data

(temperature →humidity →dew point temperature →

wet bulb temperature).

Press the button to change the displayed time

(hour:minute →month:day →Year)

Press the button again and then press to exit

read data recorded in memory mode.

TM-183N

5.9 Setting mode:

Press the button and then press the button to enter the

setting mode.

Press the button to switch between setting modes. (Remark 1);

Press the button to record settings and exit setting mode.

Remark 1: You can set eight functions in setting mode

1. Enable alarm function setting 5. High humidity alarm setting.

2. Low temperature alarm setting. 6. Time setting.

3. High temperature 7.Automatic shutdown

alarm setting. time setting.

4. Low humidity alarm 8. Clear records.

setting.

Inhaltsverzeichnis

Andere Tenmars Messgerät Handbücher

Tenmars

Tenmars TM-188 Bedienungsanleitung

Tenmars

Tenmars TM-215 Bedienungsanleitung

Tenmars

Tenmars TM-201L Bedienungsanleitung

Tenmars

Tenmars SM206 Bedienungsanleitung

Tenmars

Tenmars TM-209 Bedienungsanleitung

Tenmars

Tenmars TM-91 Bedienungsanleitung

Tenmars

Tenmars TM-720 Bedienungsanleitung

Tenmars

Tenmars TM-196 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TM-103 Bedienungsanleitung

Tenmars

Tenmars ST-141 Bedienungsanleitung

Tenmars

Tenmars TM-508A Bedienungsanleitung

Tenmars

Tenmars TM-102 Bedienungsanleitung

Tenmars

Tenmars TM-183 Bedienungsanleitung

Tenmars

Tenmars TRIAXIAL ELF Bedienungsanleitung

Tenmars

Tenmars TRIAXIAL ELF Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TM-206 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

Tenmars

Tenmars TM-4100 Bedienungsanleitung

Tenmars

Tenmars TM-288 Bedienungsanleitung

Tenmars

Tenmars ST-130 Bedienungsanleitung

Tenmars

Tenmars TM- 4100D Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung