Tenmars TM-209 Bedienungsanleitung

LUX/FC LED Light Meter

TM-201L / TM-209

User’s manual

HB2TM2090000

CONTENTS

1.Description.................................................... 1

2.Safety Precaution ......................................... 1

3.Preface ......................................................... 2

4.features......................................................... 3

5.Specifications................................................ 4

6.Operation ...................................................... 5

7.Luminous intensity measurement (TM-209)........... 9

8.Instrument Description of TM-201L............. 10

9.Instrument Description of TM-209................11

10.Attention...................................................... 13

11.Recommended Levels of Illumination ......... 14

12.Battery Replacement .................................. 16

13.End of life.................................................... 16

TM-201L/TM-209

EN-1

1. Description

Measures light from visible luminaries equipped with

white light LED, fluorescent, metal halide, high-pressure

sodium and incandescent sources.

2. Safety Precaution

CAUTION

Be extremely careful for the following

conditions while measuring

zDo not operate the meter under the environment

with explosive gas (material), combustible gas

(material) steam or filled with dust.

zIn order to avoid reading incorrect data, please

replace the battery immediately when the symbol

“” appears on the LCD.

zIn order to avoid the damage caused by

contamination or static electricity, do not touch the

circuit board before you take any adequate action.

zOperating Environment: Indoors use. This

instrument has been designed for being used in an

environment of pollution degree 2.

zOperation Altitude: Up to 2000M.

zOperating Temperature & Humidity: 5 ~℃40 ,℃

0%~ 80%RH.

zStorage Temperature & Humidity: -10 ~℃60 ,℃

0%~ 70%RH.

zEMC: EN61326-1(2006), IEC 61000-4-2(2008, IEC

61000-4-3(2006) + (2007).

TM-201L/TM-209

EN-2

3. Preface

The flux of light received in a unit area of a certain side

being shown is popularly known as illumination. The

measuring unit in both United Kingdom and America is

known as footcandles light, but in Europe it is also

known as meter candlelight.

One foot-candles light is the illumination of light that

falls on one side which is one foot away from a one

foot-candlelight and exactly intersecting with the light.

Its abbreviated form is written as 1 Fc=1 Lm/ft, similarly,

one-meter candlelight is the illumination of light that falls

on a side which is one meter away from a one meter

candlelight and exactly intersecting the light. It is also

called Lux i,e. the flux of light being received in each sq.

meter is called the illumination of one lumen.

1 FC=10.764 LUX, 1 LUX=0.09290 FC,

therefore,Nbr. of foot (meter) candlelight =

Nbr. of Lumen

──────────────

Area(sq. foot or sq. meter)

Nbr. of Lumen=Nbr. of foot (or meter)x area

TM-201L/TM-209

EN-3

4. Features

zOverload Indication: LCD screen will show “OL” on

the upper left-hand corner.

zLow battery Indication” ”.

zSampling Rate: 2.5 times per second for digital

display.

zSpectral response close to CIE luminous spectral

efficiency.

zCosine Angular corrected.

zAccording to JIS C 1609:1993 and CNS 5119

general A class Specifications.

zMeasuring lights source: LED white light and all

visible light.

zMeasuring intensities of illumination in Lux or

footcandles.

zMany applications include: Warehouses, factories,

office buildings, restaurants, schools, library,

hospitals, photographic, many video, parking

garages, museums, art galleries, stadiums, building

security.

zData hold.

zMaximum hold.(TM-201L)

zMaximum/Average/Minimum Hold.(TM-209)

zZero adjustment.

zAuto power off and disable function.(TM-209)

zAuto ranging.(TM-209)

TM-201L/TM-209

EN-4

5. Specifications

Display of

TM-201L

2000 count, maximum display 1999

Display of

TM-209

4000 count, maximum display 3999

Sensor Silicon photodiode and filter

Measuring

Range of

TM-201L

200,2000, 20000,200000 Lux

20,200,2000,20000 Footcandles

Measuring

Range of

TM-209

40,400,4000, 40000,400000 Lux

40,400,4000,40000 Footcandles

Accuracy ±3% (Calibrated to standard

incandescent lamp 2856 K∘and

corrected LED day while light

spectrum)

8% other visible light source(TM-201L)

6% other visible light source(TM-209)

30 ○±2%

60 ○±6%

Angle deviation

from cosine

characteristics 80 ○±25%

Power Supply 9V NEDA 1604, IEC 6F22, JIS 006P

battery x 1pc

Battery life About 200 hours

Dimensions Meter: 38 (H) x 55(W) x 130(L) mm

1.5(H)x 2.2(W) x 5.1(L) inch

Sensor: 25(H) x 55(W) x 80(L) mm

9.8H)x 2.2(W) x 3.1(L) inch

Weight 250 g (include battery)

Accessories User’s manual, carrying case, 9V

battery

Length of wring for light sensor: Approx. 1.5M

TM-201L/TM-209

EN-5

6. Operation

1. Press the “ ” button to turn power on or off.

2. Remove sensor cap and place the sensor

perpendicular to the light.

3. Select LUX or FC.

4. When “OL” is shown on the LCD screen, press

the button for useable reading. (TM-201L).

5. If you want to keep the reading value on the LCD

screen permanently after testing, press the “ ”

button.

6. When done testing, replace the sensor cover to

protect the filter and sensor.

zData Hold

Freezes the reading present on the LCD screen

at the moment the button is pressed.

zR(TM-201L)

Press the manual ranging button for usable

reading.

TM-201L/TM-209

EN-6

zZERO (TM-201L)

Adjust to 0, ADJ to enable LCD to indicate 000 on

the screen.

zZERO(TM-209)

Press the “ ” button for the zero adjustment if

any digits appear on the LCD screen, when the

light sensor cap is not attached “CAP” will be

shown on the screen. Make sure that it is

attached to the light sensor.

zM-H (TM-201L)

Press button to Lockup data maximal value

of measure data.

zMAX/AVG/MIN(TM-209)

Press button simultaneously Lockup data

maximum and average and minimum value of

measure data. Press the “ ”button for more

than 1 seconds to disable this feature.

zLX/FC(TM-201L)

Illuminance Lux or Foot candle measuring unit

button.

TM-201L/TM-209

EN-7

zLX/FC/CD(TM-209)

Illuminance Lux or Foot candle and luminous

intensity measuring unit button.

zL.S.(TM-209)

Light source selection 1 ~ 9 features, each light

source can set correction parameters, default as

1.000. Calibration parameters can be set to 0.001

to 1.999, when the pressure L.S. button for more

than 1 second, LCD L.S. below the LN flashing,

pressure or change L1 to L9. Press LS

button for less than 1 second, the digits of 1.000

on the lower right-hand corner of the screen will

be flashing, pressure or , you can change

the calibration parameters as to 0.995, the display

changes immediately, set 350.0x0.996 = 348.6,

Setup complete press “ ”for more than 1

second.

zL.S. (light source) factor:

L1ÎLEDwhitedaylight:0.99.

L2~L9ÎDefaultStandardlightsourceA:1.00.

zAuto-Power Off (TM-209)

Power off automatically after approx. 5

minutes without using the meter.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tenmars Messgerät Handbücher

Tenmars

Tenmars TM-203 Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

Tenmars

Tenmars TM 191 Bedienungsanleitung

Tenmars

Tenmars TM-291 Bedienungsanleitung

Tenmars

Tenmars TM-213 Bedienungsanleitung

Tenmars

Tenmars TM-206 Bedienungsanleitung

Tenmars

Tenmars TM-731 Bedienungsanleitung

Tenmars

Tenmars TM-101 Bedienungsanleitung

Tenmars

Tenmars ST-109R Bedienungsanleitung

Tenmars

Tenmars TM-102 Bedienungsanleitung

Tenmars

Tenmars TM-196 Bedienungsanleitung

Tenmars

Tenmars TM-201L Bedienungsanleitung

Tenmars

Tenmars TM-206 Bedienungsanleitung

Tenmars

Tenmars TM-102 Bedienungsanleitung

Tenmars

Tenmars TM-4001 Bedienungsanleitung

Tenmars

Tenmars TM-740 Bedienungsanleitung

Tenmars

Tenmars TM-223 Bedienungsanleitung

Tenmars

Tenmars TM-208 Bedienungsanleitung

Tenmars

Tenmars ST-130 Bedienungsanleitung

Tenmars

Tenmars TM-508A Bedienungsanleitung

Tenmars

Tenmars TM-213 Bedienungsanleitung

Tenmars

Tenmars TM-288 Bedienungsanleitung

Tenmars

Tenmars TM-190 Bedienungsanleitung

Tenmars

Tenmars TRIAXIAL ELF Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung