Tennsco 1480 Bedienungsanleitung

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE!

PK-1740212

Congratulations on your purchase of a

Tennsco Storage Cabinet! Tennsco's 1480 units

are general purpose storage cabinets that

provide a level of quality you won't find

elsewhere. They provide secure storage for

office supplies, books, records, small parts,

tools, etc.

These cabinets offer five openings with four

adjustable shelves, a locking chrome handle

with two keys, and a three-point locking system

for extra security.

Tennsco's cabinets are constructed from top

quality 22 to 24 gauge steel, with 22 gauge

steel shelves, offering weight capacities of up to

200 lbs. per shelf (evenly distributed). Our

attractive and durable powder-coated paint

finish will provide for years of service.

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must

be taken when handling various pieces to avoid

injury. For safety, wear a pair of work gloves when

assembling or performing any maintenance on

your cabinet.

ASSEMBLY INSTRUCTIONS & PARTS MANUAL #1740212

Tennsco Corp., Dickson, TN 37056-1888 • (615) 446-8000

TENNSCO STORAGE CABINET

Model 1480

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder.

This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons

not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS

CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE

AREHEREBYEXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT

SELLER’S OPTION, AND SHALL IN NO EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place

of business or require Buyer to return the goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by

Seller only if such goods are proven to be defective, are covered by this warranty and are returned within the warranty period stated above.

TENNSCO Corp., P.O. BOX 1888, DICKSON, TN 37056-1888

(615) 446-8000 or (866) 446-8686 (toll free)

Website: www.tennsco.com E-mail: [email protected]

Tools Needed: A free 11/32" nut driver is provided with each Tennsco cabinet (Ref. No. 17). In addition,

you will need a flathead screwdriver. A hammer is required to install the hinge pin and lock bar.

Two people recommended for installation. Approximate assembly time: 15 to 25 minutes.

INSTALLATION OF 1480 CABINETS

1. The reference numbers used throughout this

sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as

they are mentioned.

2. Place the cabinet back (Ref. No. 1) on a

protected surface to prevent

scratching the paint. The

flange on the

bottom of

the back

should be facing

upward.

4. Attach the right side (Ref. No. 3) to the back in

the same manner as you did in step 3,

again making sure that

the flange is around the

back and that the lances

on the

shelf adjustment

strips are

pointed

in the

same

direction as

those on the back

and left side.

6. Insert bolts into the outside

holes on the header (Ref.

No. 5), placing two on each end

as shown in Inset A. Attach

the nuts, but do not tighten. Next, insert

the loose bolt heads on the

header into the large

end of the

keyhole

slots

at the

top of

each

side panel.

Slide the bolt

heads securely into the

smaller end

of the keyhole slot, and tighten the

four nuts securely.

7. Attach the sill (Ref. No. 6) to the two holes on

each side of the cabinet bottom, using the same

technique you used to attach

the header in step 6.

Flange faces upward

3. Attach the left side (Ref. No. 2) to the back by

placing flange (A) around the back and

bolting the back and

side together with

seven bolts

and nuts

(Ref.

Nos.

18 &19).

Be sure

that the lances

on all shelf

adjustment

strips (B) point

in the same

direction.

Flange goes

under back

5. To help hold the sides in position, insert one

shelf (Ref. No. 4) into the approximate center of

the unit, inserting the shelf edges into the

lances on all

four shelf

adjustment strips.

Be sure that the

channeled edge of

the shelf

is toward

the cabinet

front. If

a lance

is too

tight, it

may be

helpful to use

a screwdriver to

SLIGHTLY pry it open.

Two bolts

and nuts on

each side

All lances point UP

on both back

and side.

Inset A

Inset B

Loosely place

two bolts and

nuts on each

side, then

slide into

keyhole slots

and secure.

Inset A

Place bolt heads into

keyhole slots, slide to

narrow end, and

secure nuts.

8. Place the bottom (Ref. No. 7) in the bottom

lances of the shelf adjustment strips. The

flange with

two holes

should

face the

front, and

it should

hang over

the sill.

Bolt to the

sill with two

two bolts and nuts.

9. Attach the top (Ref. No. 8) by sliding it

under the header and sides, with the

flange hanging over the back.

Secure with 14 bolts

and nuts (three

along each

side, four

in the back,

and four

along the

front).

11. Attach the

left door

(Ref. No. 9) to the unit by

placing the door on the hinges,

aligning the holes,

and using

a hammer

to tap the hinge

pins (Ref. No. 16) into place

with the side of a screwdriver.

10. Set the unit upright and insert

the remaining shelves at

your desired levels.

Insert shelf into

bottom lances.

Two holes must

be in front.

12. Attach the right door

(Ref. No. 10) to the unit

in the same way you

attached the left door.

1. Place the locking handle

(Ref. No. 12) on the

right hand door and

fasten with two #8-32 x

1/4 slotted hex-head

bolts and lockwashers

(Ref. No. 18).

Handle/LockingSystemInstallationInstructions

4. Slide the nylon lock bar

guide inserts (Ref. No. 15)

over the lock bar ends and

through the door slots (see

"B" at right). Push firmly

until the guides snap into

place. If necessary, turn

the handle back to the

open position and gently

tap with a hammer until the

guides slide into place.

3. With the handle still in the open

position, hook the locking bars (Ref.

No. 11) to the locking cam (see "A" at

left). Once in position, slowly rotate the

dor handle to the closed position so

the lock bars protrude from the holes

at the top and bottom of the door

(shown at right, below).

2. Turn the handle to

the open position, and

place the locking cam

(Ref. No. 13) over the square

shank of the door handle. The

latch must be facing down-

ward as shown. Then place the

locking cotter pin (Ref. No. 14)

through the hole of

the square shank,

as shown at right.

REPLACEMENT PARTS

Tennsco strives to ensure that all units ship complete with all parts and arrive undamaged. However, should

your unit contain missing or damaged parts, replacements may be obtained directly from us. To obtain proper

replacement parts, follow the instructions below, or fill out the form at www.tennsco.com/partsorder.html.

































TO OBTAIN PROPER REPLACEMENT PARTS, PLEASE PROVIDE THE FOLLOWING INFORMATION:

Model Number (1480) Purchase Date

Description of part(s) needed and part Your company name

number(s) as shown in Parts List (above) Contact person's name

Color (i.e. Medium Grey, etc.) Who the product was purchased from

Was item missing, or was it damaged?

Tennsco Corp., P.O. Box 1888, Dickson, TN 37056-1888 Customer Service: (866) 446-8686 Fax: (866) 445-7260

If requesting parts by telephone, ask for customer service and have as much of the above information ready as possible.

Cotter Pin

(Ref. No. 14)

Right Side

(Ref. No. 3)

Sill

(Ref. No. 6)

Back Panel

(Ref. No. 1)

Locking Cam

(Ref. No. 13)

Locking Handle

with Keys

(Ref. No. 12)

Shelf

(Ref. No. 4)

Bottom

(Ref. No. 7)

Left Side

(Ref. No. 2)

Top

(Ref. No. 8)

Header

(Ref. No. 5)

Left Door

(Ref. No. 9)

Right Door

(Ref.

No. 10)

Locking Bar Guide

Nylon Insert

(Ref. No. 15)

Locking Bar Set

(Ref. No. 11)

Tennsco Nut Driver

(Ref. No. 17)

Hinge Pin

(Ref. No.

16)

REF. NO. PART NO.

DESCRIPTION

1 Back panel 1 944BA

2 Left side 1 292LS

3 Right side 1 292RS

4 Shelf 4 302

5 Header 1 944HE

6 Sill 1 944SI

7 Bottom 1 292BO

8 Top 1 292TO

9 Left door 1 944LD

10 Right door 1 944RD

11 Locking bar set 1 944LB

12 Locking handle w/keys & hardware 1 944LH

13 Locking cam* 1 944LC

14 Cotter Pin* 1 CTRPN

15 Locking bar guide insert (nylon)* 2 944GI

16 Hinge pin 6 944HP

17 Tennsco nut driver 1 TOOL-2

18 #8-32 x 3/8"bolts* 44 AVAILABLELOCALLY

19 #8-32 nuts* 44 AVAILABLELOCALLY

*Included in Ref. No. 12, locking handle with keys and hardware (Part No. 944LH).

QTY.

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco SRS-601878 Series Bedienungsanleitung

Tennsco

Tennsco J2478A-N Bedienungsanleitung

Tennsco

Tennsco Imperial Shelving Bedienungsanleitung

Tennsco

Tennsco RGL-1236S Bedienungsanleitung

Tennsco

Tennsco 1870RH Bedienungsanleitung

Tennsco

Tennsco 1470RH Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet CVD7214 Bedienungsanleitung

Tennsco

Tennsco Enclosed Foreman’s Desk Bedienungsanleitung

Tennsco

Tennsco WBHC-1516-MGY Bedienungsanleitung

Tennsco

Tennsco ZL7 Series Bedienungsanleitung

Tennsco

Tennsco B-3000 Bedienungsanleitung

Tennsco

Tennsco Stackable Workbench Drawer Unit Bedienungsanleitung

Tennsco

Tennsco BCD18-72 Bedienungsanleitung

Tennsco

Tennsco ESPC-1236 Bedienungsanleitung

Tennsco

Tennsco B-6000 Bedienungsanleitung

Tennsco

Tennsco LSS-361872 Bedienungsanleitung

Tennsco

Tennsco CINCO NIVELES Bedienungsanleitung

Tennsco

Tennsco 3070 Bedienungsanleitung

Tennsco

Tennsco 1-Wide Welded Base for Lockers without Legs Bedienungsanleitung

Tennsco

Tennsco CC-30 Bedienungsanleitung

Tennsco

Tennsco SINGLE TIER Bedienungsanleitung

Tennsco

Tennsco zt7 Series Bedienungsanleitung

Tennsco

Tennsco FB-12 Bedienungsanleitung

Tennsco

Tennsco J1878A-N Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung