Tennsco Enclosed Foreman’s Desk Bedienungsanleitung

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCERETAIN INSTRUCTIONS FOR FUTURE REFERENCE

PK-1361018PK-1361018

Enclosed Foreman’s Desk

Tennsco LLC.

, Dickson, TN 37056-1888 • (866) 446-8686

GENERAL SAFETY INFORMATIONGENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.

For safety, wear a pair of work gloves when assembling or performing any maintenance on units.

LIMITED WARRANTYLIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in

the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by persons not authorized by Seller, where goods are damaged during

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER’S OPTION, AND SHALL IN NO

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

ASSEMBLY OF ENCLOSED FOREMAN’S DESK

The reference numbers used throughout this sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as they are mentioned.

First, remove all parts from carton and check against the

parts list on back cover for any missing parts. The drawer has

been placed inside the desktop for packaging purposes. While

it is not necessary to remove the drawer to assemble the unit

you may wish to do so for easier access.

Next, attach the desk riser (Ref. No. 1) to the back of the

desktop assembly (Ref. No. 2) using four of the bolts and

nuts supplied. If you have left the drawer inside the desk top,

slide the drawer partially forward for easier access to the

back holes.

2. Using a at surface, bolt the rear panel (Ref. No. 8) to the

back legs (Ref. No. 4), using eight bolts and nuts. Be

sure that the holes in the back legs are situated as shown in

the diagram.

3. Position the side panels (Ref. No. 5) on the inside of the rear

legs, making sure that the hole in the center is at the bottom

as shown in the diagram. Attach using three bolts and nuts

in each panel. Leave the center hole and the bottom hole

temporarily empty to allow for placement of the shelves.

5. Next, attach the inside shelf by bolting it to each side and

to back assembly same as the bottom shelf.

4. Attach the bottom shelf (Ref. No. 6) by bolting the shelf to

each side and to the back legs.

This hole must

be at the bottom

Two people are recommended for assembly. Approximate assembly time: 40-45 minutes.

Tools required: slotted screwdriver, Philips screwdriver, and 7/16”wrench or nut driver.

6. Attach the front assembly (Ref. No. 3) to the front of the unit

by bolting it to each side, as well as to the shelf and unit

bottom, using ten bolts and nuts.

7. Attach the desktop to the unit by bolting the top to each leg

through the pre-welded nuts.

9. Attach the handle to the front of the desk as follows:

a. Place the locking handle (Ref. No. 9) on the right hand

door and fasten with #8-32 bolts with lockwashers that

are encolsed with the handle.

b. Turn handle to open position and place locking cam

(Ref. No. 11) over the square shank of the door handle

with the latch facing downward.

c. Hook the lock bars (Ref. No. 10) to the locking cam

and hold in position while sliding nylon lock bar guide

inserts (Ref. No. 13) over the door lock bar and through

the door slots.

d. Place locking cam retainer (Ref. No. 14) over the square

shank of the door handle and drive it into place.

8. Insert the drawer lock (Ref. No. 12) into the drawer front,

then attach with the accompanying hex nut. If you

removed the drawer from the desktop earlier, reinsert

it now.

REPLACEMENT PARTSREPLACEMENT PARTS

1 Desk Riser SR-12R 1

2 Desktop Assembly SR-13T 1

3 Front Assembly SR-18F 1

4 Back Legs SR-15L 2

5 Side Panels SR-11SP 2

6 Inside/Bottom Shelf SR-29S 2

7 Drawer SR-28D 1

REF. NO.REF. NO. PART NO.PART NO.

8 Rear Panel SR-11RP 1

QUANITYQUANITY

DESCRIPTIONDESCRIPTION

9 Locking Handle w/Keys 944LH 1

10 Lock Bars SR-42LB 1

11 Locking Cam 944LC 1

12 Drawer Lock w/Hex Nut CL-1 1

13 Locking Bar Guide Inserts 944GI 2

14 Locking Cam Retainer 944CR 2

15 1/4”-20 x 5/8” Slotted Screws 42

REF. NO.REF. NO. PART NO.PART NO.

16 1/4”-20 Hex Nuts 34

QUANITYQUANITY

DESCRIPTIONDESCRIPTION

1 2 3 4

5 6

78 9 10

13 14 15 16

NOTE: Additional hardware may be included for replacement purposes.NOTE: Additional hardware may be included for replacement purposes.

Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.

However, should your unit contain missing or damaged parts, please contact your purchase location.However, should your unit contain missing or damaged parts, please contact your purchase location.

**Available Locally

49B13649B136

Andere Tennsco Inneneinrichtung Handbücher

Tennsco

Tennsco 1-Wide Welded Base for Lockers without Legs Bedienungsanleitung

Tennsco

Tennsco Stackable Workbench Drawer Unit Bedienungsanleitung

Tennsco

Tennsco J2478A-N Bedienungsanleitung

Tennsco

Tennsco MB-2-2542 Bedienungsanleitung

Tennsco

Tennsco Standard Combination Cabinet CVD7214 Bedienungsanleitung

Tennsco

Tennsco 7818 Bedienungsanleitung

Tennsco

Tennsco ZL7 Series Bedienungsanleitung

Tennsco

Tennsco 1870RH Bedienungsanleitung

Tennsco

Tennsco EB-12 Bedienungsanleitung

Tennsco

Tennsco 7218 Bedienungsanleitung

Tennsco

Tennsco 1276 Series Bedienungsanleitung

Tennsco

Tennsco 1842 Bedienungsanleitung

Tennsco

Tennsco J2478A-N-W Bedienungsanleitung

Tennsco

Tennsco EB-12 Bedienungsanleitung

Tennsco

Tennsco WELDED 3-PERSON LOCKER Bedienungsanleitung

Tennsco

Tennsco J1878C-N Bedienungsanleitung

Tennsco

Tennsco 3018 Bedienungsanleitung

Tennsco

Tennsco 1870 Bedienungsanleitung

Tennsco

Tennsco 1870 Bedienungsanleitung

Tennsco

Tennsco FB-12 Bedienungsanleitung

Tennsco

Tennsco ZA7-4824S-4D Bedienungsanleitung

Tennsco

Tennsco WBHC-1516-MGY Bedienungsanleitung

Tennsco

Tennsco RGL-1236S Bedienungsanleitung

Tennsco

Tennsco STK-151872-1 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung