Topfield TF-T5000HD PVR Bedienungsanleitung
TF-T5000HD PVR
User Manual
High Definition
Digital Terrestrial Receiver
Personal Video Recorder
Default PIN: 2010
Full Guide is available at http://www.i-topfield.com
.
2
Precautions
• Clean with a dry cloth only.
• Do not block any of the ventilation openings.
• When placed in a cabinet, make sure there is a minimum
space of 10 centimetres around it.
• Do not install near any heat sources or in direct sunlight as
this will impair cooling.
• Do not operate this product near water.
• Do not try to change the plug or defeat its safety purpose.
• This product is designed for indoor use only.
• Place the digital receiver on a firm and level surface.
• Do not lay any objects such as magazines on this unit.
• Do not overload power outlets. Doing so may result in a risk
of fire or electrical shock.
• Never open this unit’s casing under any circumstances, or the
warranty will be void.
• Unplug this unit during lightning storms or when unused for
long periods of time.
• Refer all servicing to qualified service personnel. Reverse en-
gineering or disassembly is prohibited.
• Batteries, including those which contain no heavy metals,
may not be disposed with other household wastes. Please dis-
pose of used batteries in an environmentally sound manner.
Find out the legal regulations which apply in your area.
• The mains plug shall remain readily operable so that it can be
removed easily to disconnect the power.
• Operate the digital receiver at temperatures between 0 to
45 ◦C.
• Check the mains voltage before plugging the digital receiver
to the wall socket. For the power specification, refer to the
table below.
Input voltage 100 to 240 V AC, 50/60 Hz
Power consumption 24 W at maximum in active
• This receiver does not support passive standby mode, since it
is a Complex set top box that features Ethernet.
3
Front Panel
Rear Panel
HDMI USBLANS/PDIF DC IN
IN - ANT - OUT VIDEOR - AUDIO - L
PrYPb
ANT IN Terrestrial broadcasting signal input socket
(5V, Max.100mA)
ANT OUT Terrestrial broadcasting signal output socket through the ANT IN socket
for another digital receiver
Y/Pb/Pr Component video output socket for the television set (green/blue/red)
AUDIO L/R Stereo audio output socket for the television set or the audio-video re-
ceiver
(white/red)
VIDEO Composite video output socket for the television set (yellow)
S/PDIF Digital audio output socket for the audio-video receiver
HDMI Audio and video output socket for the high definition television set
LAN Local area network port
USB port for firmware update/data transfer
(USB 2.0 Host, 5V DC, 500mA Max.)
DC IN Power jack
4
Remote Control
NOTE
The actual images and the number of buttons could be different depending on the type of
remote control provided by the manufacturer.
• button switches the digital receiver between standby mode and active mode.
• mutes the sound. Press again to switch it back on.
• changes video resolution.
• changes aspect ratio.
• not used in this model.
• switches over between television services and radio services.
• Numeric buttons are used to enter a service number for service change or to specify
values for menu options.
• switches over between the current service and the previously viewed one.
• displays the service information box. Also, displays more information about a
programme.
• has different functions per menu.
• selects subtitle track.
• displays teletext.
• selects audio track or sound mode.
• displays the favourite lists.
• displays the electronic programme guide.
• , buttons switch to the previous or next service. Also, navigate in menus and
interactive screens
• displays the services list. Also, selects menu items.
• , buttons decrease or increase the volume. Also, change values for menu options.
• displays the main menu. Also, returns to the previous menu from a submenu.
5
• exits a menu or hides on-screen information.
•
V−,
V+buttons decrease or increase the volume.
• sets a sleep timer in 10 minute increments.
• displays the list of recorded programmes that are stored in the internal hard
drive.
•
P−,
P+buttons switch to the previous or next service.
• has different functions per menu.
• makes a bookmark on playback or time-shift.
• jumps to next bookmark position.
• not used in this model.
• starts recording.
• stops playback, recording, or jumps back to live television from time-shifted tele-
vision.
• has multi purpose functions.
• not used in this model.
• starts reverse playback. Subsequent presses increase the rewind speed.
• pauses live television or playback of a recorded programme.
• resumes normal playback speed, or displays the progress bar for navigation on
playback or time-shift.
• starts fast forward playback. Subsequent presses increase the playback speed.
• jumps back to the beginning of the recording during playback.
• starts slow motion playback. Subsequent presses change the playback speed.
• has different functions per menu.
• jumps to the end of the recording during playback.
Functions of the colour buttons will be guided on the screen.
6
Connecting the TV
Connect any components before plugging the power cord into the wall outlet. If you
encounter any problems setting up your product, please contact your local retailer.
1 Connect the antenna cable to the ANT IN socket.
2 Choose a setup that matches the connection ports on your TV.
– We recommend using the HDMI connection for the highest quality HD picture.
– For a higher quality use the component connection.
– For a basic connection to your television use the composite connection.
a) HDMI connection (HDMI)
b) Component connection (YPbPr)
c) Composite connection (VIDEO)
7
First Time Installation
1 After having connected the appropriate cables from the digital receiver to your TV, make
sure the power cord of the digital receiver is plugged into a wall socket.
2 Check that your TV set is turned on.
3 Check that your TV set is on the correct video channel so that you can see the Menu from
the Digital Receiver.
4 Insert the batteries into the remote control.
5 Press the button on the remote control to turn the Digital Receiver on.
6 The language menu will appear on your
screen.
Select the language and press
OK but-
ton.
7 Set the Search Mode to Auto then move
down to Start Search and press
OK but-
ton.
8
8 Once all the channels have been
searched you will be told how many
channels have been found.
Press
OK button and then
EXIT button.
Setting up your Time
1 Press the
MENU button, and then go to
Settings, press OK.
2 Press OK on top of Time.
3 Make sure the Mode is set to Auto. Use
left or Right keys beside OK button.
4 Now head down to Time offset and ad-
just it to the following depending on
which state you reside.
• NSW, TAS, VIC: Time offset = 10:00
• SA, NT: Time offset = 09:30
• QLD: Time offset = 10:00
• WA: Time offset = 08:00
NOTE
With daylight saving you will need to add 1 hour to the above settings, or turn ’Daylight
Saving Time’ to On.
9
Network settings
You need to set up a network connection to enjoy web-enabled features on this unit.
Connect your Ethernet cable from your router to the digital receiver.
1 Press
MENU >Installation >Network
Setting >IP Setting.
2 It is recommended to use a dynamic IP
address by the router therefore select
DHCP as the connection type. How-
ever if a static connection is set then
please refer to your router for an IP ad-
dress, Subnet Mask, Gateway, Primary
DNS, Secondary DNS.
3 Go to activate profile and press
OK on
the remote.
Watching TV
TV services list
1 Now that the service search is com-
plete, press the
OK button to view the
services list.
2 On the services list, press the or
button to navigate your desired
service.
You can also switch to your desired
service by entering its service number
with the numeric buttons.
3 To select a service to watch, press the
OK button.
10
Inhaltsverzeichnis
Andere Topfield Empfänger Handbücher
Topfield
Topfield TRF-2470 Service-Handbuch
Topfield
Topfield SBI-2070 Bedienungsanleitung
Topfield
Topfield TF 6000 COT Bedienungsanleitung
Topfield
Topfield TF 5400 PVR Combo Bedienungsanleitung
Topfield
Topfield TF4000Fe Bedienungsanleitung
Topfield
Topfield TF 400 PVRt Bedienungsanleitung
Topfield
Topfield TF 5200 PVRc Bedienungsanleitung
Topfield
Topfield TF 7700 HCCI Bedienungsanleitung
Topfield
Topfield TF 5510 PVR Bedienungsanleitung
Topfield
Topfield TF4000Fe Bedienungsanleitung
Topfield
Topfield SRP-2100 Bedienungsanleitung
Topfield
Topfield TF 5010 PVRt H Bedienungsanleitung
Topfield
Topfield TF 5000 PVRt Masterpiece Bedienungsanleitung
Topfield
Topfield TF 6000 Fe Bedienungsanleitung
Topfield
Topfield TF 5000 PVRt Masterpiece Bedienungsanleitung
Topfield
Topfield TF 6000 VI Bedienungsanleitung
Topfield
Topfield TF 5000 CI Bedienungsanleitung
Topfield
Topfield TF-T6000 Service-Handbuch
Topfield
Topfield TF6500F Bedienungsanleitung
Topfield
Topfield CRC-2400 Bedienungsanleitung
