Travis Industries 564 Bedienungsanleitung

100-01192_000

Quality checked by:

Valued Customer,

We are pleased that you have chosen to purchase an

electric fireplace by Travis Industries Inc. Over the years,

valuable memories will occur around the warmth and comfort

of your hearth. Thank you for allowing our product to be the

backdrop for those special moments.

564 Electric Fireplace

Owner’s Manual

CONTENTS

PAGE 4 – 6 ImportantInstructions

PAGE 8 FireplaceInstallation

PAGE 12 Operation

PAGE 18 Maintenance

PAGE 22 Warranty

QUICKREFERENCEGUIDE

1. Prior to the first use of the fireplace verify the

following:

·Are the circuit breakers for the unit on?

·Are the light bulbs in your fireplace loose?

(to check, follow the instructions for

replacing the light bulbs in the maintenance

section of this manual)

2. The heater on your fireplace may emit a slight,

harmless odor when first used. This odor is a normal

condition caused by the initial heating of internal

heater parts and will not occur again.

3. Theinformationregarding themodelofyour fireplace

can be found on the rating plate located on the back

of the unit.

4. If you have any technical questions or concerns

regardingtheoperation of yourfireplace,or require

servicecontactyourTravis Industries, Inc.dealer

beforereturningtheproduct to the pointofpurchase.

You can find aTravis dealerat

www.travisproducts.com

IMPORTANT INSTRUCTIONS

PLEASE RETAIN THIS USER’S GUIDE FOR FUTURE

REFERENCE

When using electrical appliances, basic precautions should

always be followed to reduce the risk of fire, electric shock,

andinjurytopersons,including the following:

1. Readallinstructionsbeforeusing the Fireplace.

2. The heater is hot when in use. To avoid burns, do not

let bare skin touch hot surfaces. The trim around the

heateroutletbecomeshot during heateroperation.

Keep combustible materials, such as furniture,

pillows, bedding, papers, clothes, and curtains at

least 3 feet (0.9m) from the front of the unit.

CAUTION:HighTemperature.Keepelectrical cords,

drapery, and otherfurnishingsatleast3FT(.9m) from

the front of the heater and away from the side and

rear.

3. Extreme caution is necessary when any heater is

usedby ornear childrenor invalidsand wheneverthe

unitis left operating and unattended.

4. Always unplug the fireplace when not in use.

5. Do not operate any unit with a damaged cord or plug,

or if the heater has malfunctioned, or if the fireplace

hasbeen droppedor damaged in any manner.

Returnheater toauthorizedservice facility for

examination, electrical or mechanical adjustment, or

repair.

6. Donot use outdoors.

7. Thefireplace is not intended for use in bathrooms,

laundryareas and similar indoor locations.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

NO USER

SERVICEABLE PARTS INSIDE

Never locate heater where it may fall into a bathtub or

otherwater container.

8. Do not run the cord under carpeting. Do not cover

cord with throw rugs, runners, or the like. Arrange

cord away from traffic area and where it will not be

trippedover.

9. To disconnect the unit, turn the controls off, then

removethe plug from the outlet.

10. Do not insert or allow foreign objects to enter any

ventilation or exhaust opening as this may cause an

electric shock or fire, or damage to the heater.

11. To prevent a possible fire, do not block air intake or

exhaust in any manner. Do not use on soft surfaces,

like a bed, where openings may become blocked.

12. Allelectrical heaters have hot and arching or

sparking parts inside. Do not use in areas where

gasoline, paint, or flammable liquids are used or

stored or where the unit will be exposed to flammable

vapors.

13. Do not modify the fireplace. Use it only as described

in this manual. Any other use not recommended by

the manufacturer may cause fire, electric shock or

injury to persons.

14. To reduce the risk of electric shock, this appliance

has a polarized plug (one blade is wider than the

other). This plug will fit in a polarized outlet only one

way. If the plug does not fit fully in the outlet, reverse

the plug. If it still does not fit, contact a qualified

electrician to install the proper outlet. Do not change

the plug in any way.Avoid the use of an extension

cord. Extension cords may overheat and cause a

risk of fire. If you must use an extension cord, the

cord must be No. 16AWG minimum size and rated

no less than 1875 watts.

15. Do not burn wood or other materials in the fireplace.

16. Do not strike the clear door panel.

17. Always use a certified electrician should new circuits

oroutlets be required.

18. Alwaysuse properlygrounded, fusedand polarized

outlets.

19. Disconnectall powersupply beforeperforming any

cleaning,maintenance or relocation of the unit.

20. When transporting or storing the unit and cord, keep

ina dry place, free from excessive vibration and store

soas to avoid damage.

SAVE THESE INSTRUCTIONS

IMPORTANT INSTRUCTIONS

NOTE: Proceduresand techniques that are considered

importantenough to emphasize.

CAUTION: Proceduresand techniques which, if not carefully

followed, will result in damage to the equipment.

WARNING: Procedures and techniques which, if not carefully

followed, will expose the user to the risk of fire, serious injury,

illness or death.

Ifyou have any questions about our products pleasehave the

catalogue/modeland serialnumbers available upon calling

yourTravisIndustries, Inc. dealer. The catalogue/modeland

serial number are located on the back of the unit.

ModelNumber SerialNumber

ModelNumber

Serial

Number

Serial

Number

NOTE

A15amp,120 volt alternating current (VAC) circuit is required.

A dedicated circuit is preferred but not essential in all cases.

A dedicated circuit will be required if, after installation, the

circuit breaker trips or fuse blows on a regular basis when the

heater is operating. Additional appliances on the same circuit

may exceed the current rating of the circuit breaker.

WARNING

Ensure the power cord is not installed so that it is pinched or

against a sharp edge and ensure that the power cord is

storedor secured to avoid tripping or snaggingto reduce the

risk of fire, electric shock or injury to persons.

Construction and electrical outlet wiring must comply with

localbuilding codes and other applicable regulations to

reduce the risk of fire, electric shock and injury to persons.

Do not attempt to wire your own new outlets or circuits. To

reduce the risk of fire, electric shock or injury to persons,

always use a licensed electrician.

SITE SELECTIONANDPREPARATION

This section provides instructions for selecting a location and

preparing the site to install the fireplace.

1. Select a suitable location that is not susceptible to

moistureand is away from drapes, furniture and high

traffic.

2. For ease of electrical hook up you may wish to locate

the fireplace near an existing outlet. (refer to NOTE 1)

3. Store the fireplace in a safe dry and dust free

location.

4. Attach stand-offs to bottom of the firebox prior to

installing.Thestand-offs and hardwareare packed

withthe firebox.

NOTE

Thedimensions of thefireplace are 301/4"wide X 263/8" high

X 10 1/2" deep. The viewing area is 30 1/8" wide and 20 1/8"

high. Thefireplace does not require anyadditional venting.

ADDITIONALITEMSREQUIREDFORINSTALLATION

Thisfireplace requires a Travis Industries (Avalon, Lopi, or

Fireplace Xtrordinair) face or trim kit to finalize the installation.

Do not operate this fireplace without the face or trim.

INSTALLATIONOF FIREBOX STAND-OFFS

Install the (6) stand-offs on the bottom of the firebox prior to

firebox installation.Attach the felt tabs to the bottom of the

stand-offs.

FIREPLACEINSTALLATION

1. Install the fireplace assembly into the mantel. (refer to

mantel assembly instructions)

NOTE1

A15AMP, 120 VOLTcircuit is required. Adedicated

circuit is preferred but not essential in all cases. A

dedicated circuit will be required if, after installation, the

circuit breaker trips or fuse blows on a regular basis when

the heater is operating. Additional appliances on the

same circuit may exceed the current rating of the circuit

breaker.

IMPORTANT

If not using a mantel, the fireplace must be installed in an

enclosurewith thefollowingMINIMUM internal/opening

dimensions.

FIGURE1

Stand-off

mounting

locations

Bottom view

Felt

Tabs Felt

Tabs

263/4”

317/8”

113/4”

NEW WALLCONSTRUCTION

1. Select a suitable location that is not susceptible to

moistureand is away from drapes, furniture and high

traffic.

2. Place the fireplace in the desired location to see how

it will look in the room.

3. Mark the desired location on the floor and store the

fireplace in a safe, dry and dust free location.

4. Use studs to frame an opening of 31 7/8” wide X

26 3/4” high X 11 3/4” deep.

Option #1-Thepower cord can be lead from behind the trim

and along the wall to an outlet near the fireplace.

Option #2-A new outlet can be installed inside the new frame

construction.

Plug the unit into a 15Amp/120Volt outlet. If the cord does

not reach, you may use an extension cord rated for a

minimum of 1875 watts.

CAUTION

Clearancefor air circulation beneath the fireplace insert is

providedby sixstand-offs.

DONOTINSTALLTHEFIREPLACEINSERTDIRECTLYON

CARPETOR SIMILARSURFACESWHICH MAYRESTRICT

AIRCIRCULATION. If installingthe fireplace in a carpeted

area,place a one-piece, solid, flat surface under the fireplace

insert. Ensure that all six of the insert’s stand-offs rest

securely on this surface.

ARCHED FACE INSTALLATION IN FRAMED-IN WALL

NOTE: This does not apply to fireplaces using a Travis pre-built

mantel.

When the 564 E is installed into a framed-in wall with square framing

and drywall a gap will appear between the face and drywall. See the

following page for two methods used to eliminate this gap.

When the fireplace is installed into the framing dimensions detaild on page 9 there is a 1/4” gap between

the face and the drywall (or other interior siding).

SIDE VIEW (CROSS SECTION)

1/4” Gap

Face

Fireplace

Drywall

Framing

Upper

Heat

Shield

(required)

26-3/4”(from

base of fireplace)

26-1/4”(from

base of fireplace)

27-1/8”(from

base of fireplace)

NOTE: The faceplate installs 1/8” above

the base of the fireplace.

AAAAAAAAAA

AAAAAAAAA

36”

61”Radius

29”

2-3/4”

AAAAAAAA

AAAAA

AAAA

17-1/2”

32-1/4”

Andere Handbücher für 564

Inhaltsverzeichnis

Andere Travis Industries Kamin im Innenbereich Handbücher

Travis Industries

Travis Industries 430 GSR2 Bedienungsanleitung

Travis Industries

Travis Industries 564 SS Deluxe Bedienungsanleitung

Travis Industries

Travis Industries Flush Wood Plus Insert Bedienungsanleitung

Travis Industries

Travis Industries Large Flush Bedienungsanleitung

Travis Industries

Travis Industries 864 TRV Bedienungsanleitung

Travis Industries

Travis Industries 99200149 Bedienungsanleitung

Travis Industries

Travis Industries Revolution 36CF Bedienungsanleitung

Travis Industries

Travis Industries 564 HO GSR2 Bedienungsanleitung

Travis Industries

Travis Industries DVS EF Insert Bedienungsanleitung

Travis Industries

Travis Industries 21 TRV GreenSmart Bedienungsanleitung

Travis Industries

Travis Industries DVL GSR2 NB Bedienungsanleitung

Travis Industries

Travis Industries 564 Bedienungsanleitung

Travis Industries

Travis Industries DVL EF Bedienungsanleitung

Travis Industries

Travis Industries DVL Insert EF II Bedienungsanleitung

Travis Industries

Travis Industries 31 DVI GSB2 Bedienungsanleitung

Travis Industries

Travis Industries 616 GSR Bedienungsanleitung

Travis Industries

Travis Industries 1250 Insert Bedienungsanleitung

Travis Industries

Travis Industries DVS GSR Ember-Fyre Bedienungsanleitung

Travis Industries

Travis Industries GreenSmart Fireplace 564 SS Bedienungsanleitung

Travis Industries

Travis Industries DVS GSR2 NB Insert Bedienungsanleitung

Travis Industries

Travis Industries 564 HO Bedienungsanleitung

Travis Industries

Travis Industries 864 See Through GS2 Bedienungsanleitung

Travis Industries

Travis Industries Fireplace Xtrordinair 864 Deluxe Bedienungsanleitung

Travis Industries

Travis Industries Avalon Pendleton 745 Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch