TRENDnet TEW-755AP2KAC V1 Bedienungsanleitung

TEW-755AP2KAC (V1) / TEW-821DAP2KAC (V1)

Quick Installation Guide

Table of Content

1 English

1. Before You Start

2. Hardware Installation and Configuration

3. Connect your wireless access points

ENGLISHFRANÇAISDEUTSCH

ESPAÑOLРORTUGUÊS

1. Before You Start

Package Contents

Ÿ1 x TEW-WLC100 wireless LAN controller

Ÿ 2 x TEW-755AP N300 PoE access points or TEW-821DAP AC1200 dual band PoE access

points

Ÿ2 x TPE-113GI 802.3af Gigabit PoE injectors

Ÿ2 x Network cables (1.5 m / 5 ft.)

ŸTEW-WLC100 power adapter (12V DC, 1A)

ŸQuick Installation Guide

ŸCD-ROM (User's Guide)

ŸController rack mount kit

ŸAccess point mounting plates

Minimum Requirements

ŸComputer with an Ethernet port and web browser

Ÿ Network cable for computer connection to controller

Ÿ Network cables for access point connections to PoE injectors

Important Note: Make sure your existing network is using a DHCP server to distribute IP

addresses to the access points. By default, TRENDnet access points listed below will obtain an IP

address automatically through DHCP or otherwise default back to 192.168.10.100 /

255.255.255.0 if a DHCP server is not available on your network. Each access point must be

assigned a unique IP address on the same network. The wireless controller and access points

must be connected to the same IP subnet on your network (e.g. 192.168.10.x / 255.255.255.0).

Optional Equipment

Ÿ EIA standard 19” rack

Ÿ Power drill/drill bits and Phillips bit or screwdriver for mounting

Access Point Model Description Controller Compatible

Firmware Version

TEW-755AP N300 PoE Access Point 1.03 or above

TEW-821DAP AC1200 Dual Band PoE Access Point 1.05 or above

TEW-825DAP AC1750 Dual Band PoE Access Point 1.01 or above

Access Point Compatibility

By default, the access points included in this kit are controller ready. For any additional access

points, please refer to the access point model compatibility list below and controller compatible

firmware version. You can download the access point's firmware from

http://www.trendnet.com/support which include instructions on how to upgrade the firmware.

Before any additional access points are added to the wireless controller, make sure to reset the

access points to factory default.

ENGLISHFRANÇAISDEUTSCH

ESPAÑOLРORTUGUÊS

2. Initial Controller Setup

3. Assign a Static IP address to your computer's network adapter in the subnet of 192.168.10.x

(e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.

4. Open your web browser, type the default IP address of the wireless controller in the address

bar, and then press Enter. The default IP address is 192.168.10.200.

Note: Before connecting the wireless controller to the network and connecting other devices

such as PoE injectors or access points, follow the steps to set up your controller IP address

settings and administrator password first.

Power

6. Click Management and click on LAN.

5. Enter the User name and Password, and then click Login. By default:

User Name: admin

Password: admin

LAN

Management

ENGLISHFRANÇAISDEUTSCH

ESPAÑOLРORTUGUÊS

8. To change the controller administrator password, click Account Settings and click Edit.

Edit

Account Settings

7. Configure the wireless controller IP address settings to match the requirements of your

network and click Apply.

IP Address

Netmask

Gateway

DNS1

DNS2

192.168.10.200

255.255.255.0

192.168.10.1

Apply

Network Settings

LAN Settings TEW-WLC100

10. Using an Ethernet cable, connect one of the five Gigabit Ethernet ports located on the back of

the wireless controller to your network (e.g. router, switch, etc.)

Network

9. In the New Password and Confirm Password fields, enter the new administrator password

and click OK to save the new password settings. You will be prompted immediately

afterwards to login to the controller management page with the new password.

Confirm Password

New Password

ENGLISHFRANÇAISDEUTSCH

ESPAÑOLРORTUGUÊS

3. Connect your wireless access points

Note: Before mounting the access points to the desired locations, connect the access point

locally directly to the wireless controller first for initial configuration. The access points are

standard IEEE 802.3af PoE compliant and may also be connected to a PoE/PoE+ switch for data

and power, however, for the purposes of this installation guide we will reference installation

using the supplied PoE injectors.

1. Connect the included PoE injector power adapters to the supplied PoE injectors DC IN power

ports. Connect the adapters to available power outlets to power on the PoE injectors.

2. Using the included Ethernet cables, connect the wireless controller to the DATA IN ports of

the PoE injectors.

3. Using additional Ethernet cables, connect the access points to the PWR+DATA OUT ports

of the PoE injectors.

Access Point

Power

Access Point

PWR+ DATA

OUT

DATA

PoE Injector

Power

PWR+ DATA

OUT

DATA

PoE Injector

Network

4. Initial Wireless Setup

1. Using your computer and web browser, access the wireless controller management page

using the newly assigned IP address settings (configured in Section 2) and login.

Note: If the IP address settings were not changed in Section 2, the IP address settings for the

controller are 192.168.10.200 / 255.255.255.0.

2. Click Monitor and click Devices.

3. The access points will be discovered automatically and appear in the Device List.

Note: If the access points do not appear, make sure access points are powered by checking the

physical LEDs and physical cable connections and refresh the page.

Devices

Monitor

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TRENDnet Netzwerk-Router Handbücher

TRENDnet

TRENDnet TEW-691GR Bedienungsanleitung

TRENDnet

TRENDnet TEW 632BRP - Wireless Router Bedienungsanleitung

TRENDnet

TRENDnet TE-4010 Benutzerhandbuch

TRENDnet

TRENDnet GREENnet TEW-639GR Bedienungsanleitung

TRENDnet

TRENDnet TEG-S160TX - Gigabit Switch With 31 Gbps Switching... Bedienungsanleitung

TRENDnet

TRENDnet TE100-S5Pplus Kurzanleitung

TRENDnet

TRENDnet TDM-C400 Bedienungsanleitung

TRENDnet

TRENDnet TEW-436BRM Bedienungsanleitung

TRENDnet

TRENDnet TI-G80 Bedienungsanleitung

TRENDnet

TRENDnet TEW-755AP2KAC Bedienungsanleitung

TRENDnet

TRENDnet TW100-BRF114 Bedienungsanleitung

TRENDnet

TRENDnet TDM-C400 Bedienungsanleitung

TRENDnet

TRENDnet TW100-BRV214 Bedienungsanleitung

TRENDnet

TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M Bedienungsanleitung

TRENDnet

TRENDnet TDM-C400 Bedienungsanleitung

TRENDnet

TRENDnet TW-200 Bedienungsanleitung

TRENDnet

TRENDnet TEW-829DRU Bedienungsanleitung

TRENDnet

TRENDnet TEW827DRUV2 Bedienungsanleitung

TRENDnet

TRENDnet TEW-435BRM - 54MBPS 802.11G Adsl Firewall M Bedienungsanleitung

TRENDnet

TRENDnet TE100-S50g Bedienungsanleitung

TRENDnet

TRENDnet TW100-BRF114 Bedienungsanleitung

TRENDnet

TRENDnet TW100-BRV204 SHEETS Bedienungsanleitung

TRENDnet

TRENDnet TW100-BRV204 SHEETS Bedienungsanleitung

TRENDnet

TRENDnet TEW-658BRM Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise