TTS Easi-Scope 2 Bedienungsanleitung

User Guide

Easi-Scope 2 User Guide

Warnings

Please retain these instructions for future reference

Easi-Scope 2 contains a non-replaceable, rechargeable

battery

Do not attempt to remove the battery

In the event of an electro-static discharge, your

Easi-Scope 2 may malfunction. In this case, please

switch it off and then back on again

Warranty is void if the case is opened for any reason

The warranty does not cover any data loss nor any

consequential loss of information

Features

Easi-Scope 2 is a USB Wireless Microscope which uses the

2.4GHz frequency band to transmit digital images of up to 640 x

480 resolution with a range of over 10m. The USB receiver of

your Easi-Scope 2 can pair with up to four (4) Easi-Scope 2s

simultaneously and allow you to switch between the multiple

paired devices.

Easi-Scope 2 User Guide

Package Contents

Easi-Scope 2

×1

USB Receiver

×1

Installation CD

×1

User Manual

×1

USB Charging Cable

×1

Easi-Scope 2 User Guide

Minimum Requirements

1.8 GHz Intel / AMD Processor;

256 Mbytes of RAM;

USB Version 2.0;

A Compact Disc Drive;

Supported Operating Systems

Windows XP SP3, Windows Vista and Windows 7.

Part and Control Locations

Snap Button

Focusing Dial

Power / Pairing Button

USB Socket

Objective Lens Tube

LED Illumination

Status Indicator

Channel Indicator

Channel Select/Pairing Button

Easi-Scope 2 User Guide

Installing Hardware Driver and Application

Plug your USB Receiver into your computer and wait for

the automatic Windows hardware installation to finish.

Insert the Installation CD into your optical drive and the

Easi-Scope 2 Installer should launch automatically. If

this doesn’t start, go to ―My Computer‖, select the CD

drive and double click on setup.exe

When the Easi-Scope 2 InstallShield Wizard appears,

Click Next.

Wait for installation to be completed and then click

―Finish‖ to close the Easi-Scope 2 InstallShield Wizard.

Using your Easi-Scope 2

Charging your Easi-Scope 2

Your Easi-Scope 2 is equipped with a built-in rechargeable

battery which is charged using the mini-USB connector on the

side of your Easi-Scope 2. Fully charge the battery before your

first use.

To Charge the battery, plug-in the supplied USB cable to your

Easi-Scope 2 and to your computer. When charging your Easi-

Scope 2, the Status Indicator on your Easi-Scope 2 lights up until

the battery is fully charged.

Easi-Scope 2 User Guide

If the battery of your Easi-Scope 2 is running low, the Status

Indicator flashes slowly.

Note: It is recommended that you do not partially charge the

battery and that you fully charge the battery every time you

charge it.

Start Up

Start up your computer.

Plug in your Easi-Scope 2 USB Receiver to your

computer.

Switch ON your Easi-Scope 2 by pressing the

Power/Pairing button briefly.

Easi-Scope 2 User Guide

Pairing

Once your Easi-Scope 2 has started up, you may need to pair

your Easi-Scope 2 with your USB Receiver if:

You are using your Easi-Scope 2 for the first time or,

Your Easi-Scope 2 has previously been paired with another

USB Receiver.

The pairing procedure is as followed:

Start up your computer, Plug in your USB Receiver,

launch your Easi-Scope 2 application and switch ON

your Easi-Scope 2.

Press and Hold the Power/Pairing Button on your Easi-

Scope 2 for seven (7) seconds until the Status Indicator

flashes#rapidly, which indicated that your Easi-Scope 2

has entered Pairing Mode*.

Press and Hold the Pairing Button on the USB Receiver

for three (3) seconds until the Channel Indicator LED

flashes rapidly, which indicated that your USB Receiver

has entered Pairing Mode*.

Once both devices enter pairing mode, they will initiate

the pairing process. You will shortly be able to see the

image in your Easi-Scope 2 application.

Easi-Scope 2 User Guide

* Pairing mode timeout is set to be 15 seconds on your Easi

Scope 2 and your USB Receiver. If pairing is not successful

within this period, your devices will return to their normal state

without being paired. Repeat steps 2 to 4 to pair your devices

again.

# The Status Indicator will not flash if you are charging the battery

of your Easi-Scope 2.

Pairing multiple Easi-Scope 2s

Your Easi-Scope 2 USB Receivers are capable of pairing up to

four (4) Easi-Scope 2s and allow you to switch between the

image sources. To pair multiple Easi-Scope 2s, follow the

procedure below.

Pair the first Easi-Scope 2 using the pairing procedure

described in the previous section.

Once completed, click the Channel Select/Pairing Button

once to switch to the next pairing channel.

The Channel Indicator LED on the USB Receiver will

move to the next channel.

Repeat the pairing procedure to pair a 2nd Easi-Scope 2.

Repeat step 2-3 to pair up to four (4) Easi-Scope 2s.

Easi-Scope 2 User Guide

Using the Easi-Scope 2 with Easi-Scope 2 Application

Launching the Application

Launch your Easi-Scope 2

application by double clicking on

the Easi-Scope 2 icon. The

Easi-Scope 2 Application

Window appears as shown.

Easi-Scope 2 User Guide

Taking a Photo

To take a photo of the image

you are viewing, press the Snap Button

on your Easi-Scope 2.

A new window will pop up. Before saving your photo,

you may rotate your photo as you wish using the

―Rotate‖menu.

Click ―File‖then select ―Save As‖

Recording a Video

To record a video, click Capture

then select Start Capture.

Andere Handbücher für Easi-Scope 2

Inhaltsverzeichnis

Sprachen:

Andere TTS Mikroskop Handbücher

TTS

TTS Easi-Scope el00015 Bedienungsanleitung

TTS

TTS Easi-Scope Bedienungsanleitung

TTS

TTS Flexi-Scope Bedienungsanleitung

TTS

TTS Easi-Scope IT01121 Bedienungsanleitung

TTS

TTS Easi-Scope 2 Bedienungsanleitung

TTS

TTS Easi-Scope Bedienungsanleitung

TTS

TTS Easi-Scope el00015 Bedienungsanleitung

TTS

TTS Tuff-Scope 2 Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung