Ubiquiti AirCube Bedienungsanleitung

Ubiquiti airCube Router Config & Install Instructions

(for Experienced Installers) v3.2

Before Pugging in the Router:

• Make sure you have the current airCube ﬁrmware on your laptop. (www.ui.com/

download/accessories/aircube).

• You’ll want these instructions open on your computer so you can copy UNMS key.

Power Up Router:

• Plug POE into airCube’s gray “24V POE In” port (NOT the blue port).

• Alternately use a 5V micro USB.

Plug/Connect Laptop to Router:

• Connect laptop via Ethernet to port 2 or 3 on the airCube.

• Alternatively, you can connect via Wi-Fi to the airCube -XXX Wi-Fi using the WPA2

password printed on the bottom of the router–but be sure your computer is not seeing

other Wi-Fi sources, they may hijack your config session.

Open airCube Dashboard in Browser and Log In:

• Open a browser and go to https://192.168.1.1

• Advance through “connection is not private” warnings

• Login with username “ubnt” and the “PSWD” printed on bottom of airCube (next to QR

code).

Update Firmware:

• Click “System” (gears icon) from black menu bar at left.

• Under “Device Maintenance” select “Upgrade Firmware.” (Alternatively, you can select

this from the top right of the main dashboard).

• Select the ﬁrmware ﬁle from your computer, then proceed through the steps to Verify

and Upgrade it.

• You will need to log back into the airCube after the upgrade completes—again using the

username “ubnt” and the “PSWD” on the bottom of the router.

(continued on next page)

Configure Settings on System Tab:

• Click “System” (gears icon) from bottom of black menu bar at left.

• Change the Device Name to the member’s PPPoE username with an -ac appended at the

end (get the PPPoE name from the Network | Radius area in Sonar)

• Change the Administrator Name to “admin”

• Click “Change Password” and change the password to the member’s PPPoE password.

• Make sure “POE Passthrough” is turned ON (unless this is a direct connect member)

• Turn Connect to UNMS on.

• From file copy of these instructions, copy/paste this text string into the UNMS Key field:

wss://172.16.2.200:443+h685PMGxcoBr9vMqyylP8rOKBdFtkSSTS3cWntHRkJ7k6k1M+allowSelfSignedCertificate

• Scroll to the bottom of the screen and click “Save Changes.”

Configure Settings on Network Tab:

• Select “Network” (ﬂowchart icon) from the left-side nav area and do the following:

• Change “Connection Type” to PPPOE.

• Enter the Radius Username and Password (from the Network | Radius area in Sonar).

• Make sure “Block Management Access” is turned OFF.

• Scroll to the bottom of the screen and click “Save Changes.”

Optional: Change WiFi SSID and PW

• (Do this optional Wi-Fi change as the last step so you don’t lose connection).

• Select the “Wi-ﬁ” (signal strength icon) from the left-side Nav menu and enter the new

SSID and WPA2 password.

• Remember to hit “Save Changes."

• The WPA2 password printed on the bottom of the airCube will no longer work.

Plug in Configured Router at Member’s Location (not for direct connect members):

• Use a shielded patch cable to connect the POE port on the POE power supply to the

airCube’s gray “24V POE In”. Note that the LAN port on the POE will remain empty.

• Plug the member’s CPE radio Ethernet cable in to the airCube’s blue WAN port.

• Use ports 2 and 3 for any local Ethernet networks.

• Using black electrical tape, tape over the Reset button hole.

Update Yellow Tips Sheet and Sonar Router records:

• Enter info at bottom of yellow Tips sheet and hand to member.

• In Sonar account page go to Custom Fields tab and enter airCube in router brand and

enter admin un and pw. Check the Router is in Managed Mode checkbox.

Inhaltsverzeichnis

Andere Ubiquiti Netzwerk-Router Handbücher

Ubiquiti

Ubiquiti UFiber UF-WIFI Gebrauchsanweisung

Ubiquiti

Ubiquiti EdgeRouter ER-8 Bedienungsanleitung

Ubiquiti

Ubiquiti ER-12 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USG Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter 4 Bedienungsanleitung

Ubiquiti

Ubiquiti AmpliFi AFi-G Bedienungsanleitung

Ubiquiti

Ubiquiti UF-LOCO Bedienungsanleitung

Ubiquiti

Ubiquiti Amplifi AFi-LR Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP PRO Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter ERPro-8 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter 6P Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Bedienungsanleitung

Ubiquiti

Ubiquiti edgepoint r6 Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBridge M3 Bedienungsanleitung

Ubiquiti

Ubiquiti Edge Pro ERPro-8 Bedienungsanleitung

Ubiquiti

Ubiquiti ToughSwitch Pro TS-80-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti edgerouter X SFP Bedienungsanleitung

Ubiquiti

Ubiquiti AFi-ALN Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter PRO Bedienungsanleitung

Ubiquiti

Ubiquiti LTU LR Bedienungsanleitung

Ubiquiti

Ubiquiti ER-4 Bedienungs- und Wartungsanleitung

Ubiquiti

Ubiquiti EdgeRouter 6P Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter LITE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter ER-12P Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung

Ubiquiti airCube Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken