Ubiquiti ER-8-XG Bedienungsanleitung

EdgeRouter Mounting Brackets (Qty. 2) Bracket Screws (Qty. 8)

Mounting Screws (Qty. 4) Cage Nuts (Qty. 4) Power Cords (Qty. 2)

Rubber Feet (Qty. 4)

Package Contents

Installation Requirements

Phillips screwdriver (for rack- or wall-mounting)

Standard-sized, 19" wide rack with a minimum of 1U height available (for rack-mounting)

For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use.

For outdoor applications, shielded Category 5 (or above) cabling should be used for all

wired Ethernet connections and should be grounded through the AC ground of the power

supply.

We recommend that you protect your networks from harmful outdoor environments and

destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For

more details, visit:

ui.com/toughcable

Note:

Although the cabling can be located outdoors, the EdgeRouter itself should be

ER-8-XG Quick Start Guide

Click for

Table of Contents

System LED

SFP Link/Act LED (Ports eth1-8)

RJ45 Link/Act LED (Port eth0)

housed inside a protective enclosure.

Hardware Overview

Note:

The System LED functionality has been updated with rmware v1.10.8. We

recommend that you update the EdgeRouter to the latest rmware.

Flashing White Bootup in progress.

White Ready for use, not connected to Ubiquiti® Network

Management System (UNMS™).

Blue Ready for use, connected to UNMS.

Steady Blue with Occasional

Flashing Ready for use, unable to connect to UNMS, check

connection to UNMS server.

Quickly Flashing Blue Used to locate a device in UNMS.

Alternating

Blue/White Firmware upgrade in progress.

Oﬀ No Link

White Link Established

Flashing Indicates Activity

Oﬀ No Link

ER-8-XG Quick Start Guide

Click for

Table of Contents

microSD

USB

Console

SFP+ (Ports eth1-8)

RJ45 (Port eth0)

Reset Button

PSU Power Ports

Green Link Established

Flashing Indicates Activity

Reserved for future use.

RJ45 serial console port for Command Line Interface (CLI) management.

Hot-swappable SFP+ ports support 10 Gbps connections.

RJ45 port supports 10/100/1000 Ethernet connections.

Click here

to learn how to reset an EdgeRouter to factory defaults.

Two AC/DC 100W power supplies are included. You also have the option to use a DC/DC

PowerModule™, model RPS-DC-100W (sold separately).

Hardware Installation

ER-8-XG Quick Start Guide

Click for

Table of Contents



ER-8-XG Quick Start Guide

Click for

Table of Contents

ER-8-XG Quick Start Guide

Click for

Table of Contents

ER-8-XG Quick Start Guide

Click for

Table of Contents

Connecting SFP+

ER-8-XG Quick Start Guide

Click for

Table of Contents

For information about compatible ber SFP modules, visit:

ubnt.link/SFP_DAC_Compatibility

Accessing the EdgeOS Conguration Interface

The EdgeOS® conguration interface can be accessed via DHCP or static IP address

assignment. By default, eth1 is set up as a DHCP client, while eth0 is assigned a static IP

address of 192.168.1.1. To congure the EdgeRouter, proceed to the appropriate section:

DHCP or

“Static IP Address”

DHCP

1. Connect a cable from eth1 on the EdgeRouter to a LAN segment that has an existing DHCP

server.

ER-8-XG Quick Start Guide

Click for

Table of Contents

2. To check the IP address of the EdgeRouter, use one of the following methods:

Set up the DHCP server to provide a specic IP address to the EdgeRouter based on its

MAC address (on the label).

Let the EdgeRouter obtain an IP address and then check the DHCP server to see which

IP address was assigned.

3. Launch your web browser. Enter the appropriate IP address in the address eld. Press enter

(PC) or return (Mac).

4. Enter ubnt in the Username and Password elds. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License Agreement to accept it. Click

The EdgeOS Conguration Interface will appear, allowing you to customize your settings as

needed. For more information, refer to the EdgeOS User Guide, which is available at

ui.com/download/edgemax

Static IP Address

ER-8-XG Quick Start Guide

Click for

Table of Contents

1. Connect an Ethernet cable from the Ethernet port of your computer to the port labeled

eth0 on the EdgeRouter.

2. Congure the Ethernet adapter on your host system with a static IP address on the

192.168.1.x subnet.

3. Launch your web browser. Type https://192.168.1.1 in the address eld. Press enter (PC) or

return (Mac).

4. Enter ubnt in the Username and Password elds. Read the Ubiquiti License Agreement,

and check the box next to I agree to the terms of this License Agreement to accept it. Click

The EdgeOS Conguration Interface will appear, allowing you to customize your settings as

needed. For more information, refer to the EdgeOS User Guide, which is available at

ER-8-XG Quick Start Guide

Click for

Table of Contents

Andere Handbücher für ER-8-XG

Andere Ubiquiti Netzwerk-Router Handbücher

Ubiquiti

Ubiquiti ROcket M5 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter Lte 3 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter ER-10X Bedienungsanleitung

Ubiquiti

Ubiquiti ERLite-3 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-24-250W Bedienungsanleitung

Ubiquiti

Ubiquiti UDM Bedienungsanleitung

Ubiquiti

Ubiquiti UF-LOCO Bedienungsanleitung

Ubiquiti

Ubiquiti ERLite-3 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter X ER-X Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter 12 Bedienungsanleitung

Ubiquiti

Ubiquiti ER-8-XG Bedienungsanleitung

Ubiquiti

Ubiquiti UCK-G2 Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter LITE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter ER-12P Bedienungsanleitung

Ubiquiti

Ubiquiti ToughSwitch Pro TS-80-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBridge M3 Bedienungsanleitung

Ubiquiti

Ubiquiti 3GStation Professional Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter X ER-X Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USG Bedienungsanleitung

Ubiquiti

Ubiquiti LTU LR Bedienungsanleitung

Ubiquiti

Ubiquiti UFiber UF-WIFI Gebrauchsanweisung

Ubiquiti

Ubiquiti UniFi Security Gateway PRO Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter ER-8 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung