Ubiquiti UniFi AP-AC PRO Bedienungsanleitung

UNIFIAP-AC PRO | MAY 15, 2019

SETUP GUIDE

UniFi AP-AC PRO Setup Guide | May 15, 2019 | i

UniFi AP-AC PRO Setup Guide

Date Reference: Page, Paragraph Revision

#Comments

Oct 18, 2018 Initial

Release

May 15, 2019

Page 12: UniFi Controller Software Configuration (Using

a Squirrel Network or No DHCPServer): Noted

recommendation to provision all access points on a live,

internet-enabled network before connecting to a local-

network-only Squirrel NIC / IP range. Added NIC-specific

steps.

Appendix: Third-Party Installation Guide: New version of

guide attached.

For further information about this manual or other Squirrel Systems products, contact us at 1.800.388.6824.

Outside the U.S. and Canada, call 604.412.3300.

Squirrel Professional is a trademark of Squirrel Systems.

Reference to these products is not intended to imply affiliation with or sponsorship of Squirrel Systems.

PROPRIETARY NOTICE

This document contains confidential and trade secret information proprietary to Squirrel Systems, and is

protected by laws pertaining to such materials. At no point should this information be copied, used, or

disclosed to anyone, in whole or in part, without the express written permission of Squirrel Systems.

For authorization to copy this information, please contact Squirrel Systems at 1.800.388.6824 or

604.412.3300 outside the U.S. and Canada.

DISCLAIMER

Squirrel Systems provides this documentation as is without warranty of any kind, either express or implied.

This document could include technical inaccuracies or typographical errors. Squirrel Systems may make

improvements and/or changes at any time to the product(s) and/or program(s) described in this document.

Changes are made periodically to the information herein; these changes will be incorporated in new editions of

the document.

UniFi AP-AC PRO Setup Guide | May 15, 2019 | ii

TABLE OF CONTENTS

1 Overview 1

2 Requirements 1

2.1 Hardware / Network 1

2.2 Software 1

3 Hardware Overview 1

3.1 LED Legend 1

3.2 Ports 2

4 Connecting Device(s) 3

4.1 Connecting Device to PoE+ Compliant Router 3

4.2 Connecting Device to Router with a PoE Adapter 4

5 UniFi Controller Software Installation 5

6 Network Setup (Using an Existing Network / DHCPServer) 6

6.1 UniFi Controller Software Configuration 6

6.2 Configuring the Site and Network 9

7 Network Setup (Using a Squirrel Network or No DHCPServer) 12

7.1 UniFi Controller Software Configuration 12

7.2 Configuring the Site and Network 15

8 Adding Additional APs to the Network (Device Adoption) 18

Appendix: Third-Party Installation Guide 22

UniFi AP-AC PRO Setup Guide | May 15, 2019 | 1

1 OVERVIEW

The UniFi AC Pro AP (model UAP-AC-PRO) is a gigabit, 802.3af-powered access point (AP) with unlimited

scalability under one central controller. This APis suitable for high-density network traffic requiring high

uptime and low latency, and allows for remote access to monitor and upgrade deployed devices.

This document covers setting up the software and network on the AP and wireless client devices for use as a

SquirrelMobility network. It does not cover configuring the APfor use with a UniFi Cloud Key or UniFi

Controller management station as these devices are not yet certified by Squirrel. These devices may be

integrated with the AP into a full-scale network solution at a later date, at which point this document will be

updated to include them.

For mounting setup instructions, refer to the UniFi AC Pro AP's Quick Start Guide, included in the AP's

packaging.

2 REQUIREMENTS

2.1 Hardware / Network

lA separately-installed router or switch.

lA DHCP-enabled network (for the APto obtain anIPaddress to broadcast to wireless clients).

lIf the router or switch is not 802.3af/802.3at PoE+ compliant, a power-over-ethernet (PoE) converter is

required to power the device.

2.2 Software

lLinux, Mac OS X 10.11 (or above), or Microsoft Windows 7/8/10

lJava Runtime 1.8+

lGoogle Chrome

3 HARDWARE OVERVIEW

3.1 LED Legend

LEDColour Status

White Factory default, waiting to be configured or integrated.

Flashing White Booting up or initializing.

Alternating White/Blue Device is busy, typically updating. Do not unplug.

Blue Device has been integrated successfully and is working normally.

Flashing Blue When you click "Locate" in the UniFi Controller software, the AP will quickly

flash blue.

Blue with Occasional

Flashing Device is isolated with no uplink.

UniFi AP-AC PRO Setup Guide | May 15, 2019 | 2

3.2 Ports

lSecurity Slot: Used to remove the UniFi AP from the mounting bracket by inserting a paper clip to

release the lock tab.

lSecondary Port: A Gigabit Ethernet port used for bridging.

lReset Button: The reset button has two functions:

oRestart: Press and quickly release the restart button to restart the device.

oRestore to Factory Default Settings: Press and hold the restart button for more than five

seconds.

lUSBPort

lMain Port: A Gigabit Ethernet port used to connect to power and LAN.

UniFi AP-AC PRO Setup Guide | May 15, 2019 | 3

4 CONNECTING DEVICE(S)

To access the ports on the device, turn the mounting cover counter-clockwise to unlock it from the device.

Afterwards, remove the rubber port cover. Replace these parts after connecting the Ethernet cord to the

primary port.

4.1 Connecting Device to PoE+ Compliant Router

If the router or switch being used is 802.3af/802.3at PoE+ compliant, connect the UnFi APdirectly to the

router/switch's PoE+ port. A regular PoE port provides insufficient wattage to power the device. Ensure that

the port is PoE+ compliant.

UniFi AP-AC PRO Setup Guide | May 15, 2019 | 4

4.2 Connecting Device to Router with a PoE Adapter

Plug the PoE adapter into the wall power socket (or mount it using the instructions provided in the packaging),

then connect the LANport to the router/switch and the POEport to the UnFi AP's main port.

UniFi AP-AC PRO Setup Guide | May 15, 2019 | 5

5 UNIFICONTROLLER SOFTWARE INSTALLATION

The UniFi Controller software allows you to manage the UniFi network using a web browser. These steps

assume a Windows operating system. For Mac instructions, refer to the UniFi Controller User Guide available

at http://downloads.ubnt.com/unifi. For Linux instructions, refer to the UnFi blog at http://ubnt.link/UniFi-Blog.

1. Download the latest version of the UnFi Controller software.

a. Navigate to http://downloads.ubnt.com/unifi

b. Select UniFi from the top tab.

c. Scroll down to the Software section.

d. Locate and download the latest UniFi SDN Controller for Windows (e.g. "UniFi SDN

Controller 5.8.24 for Windows").

2. Launch UniFi-installer.exe.

3. Click Install.

4. If Java 1.6 or higher is not installed on the machine, you will be prompted to download and install it. If

you do not see this prompt, proceed to step 5.

a. ClickOK.

b. Your default web browser opens on the Java download page. Click Free Java Download.

c. Review the end user license agreement and click Agree and Start Free Download.

d. Run the JavaSetup executable (e.g. JavaSetup8u181.exe).

e. The Java Setup - Welcome screen appears. Click Install >.

f. The Java Setup - Progress screen appears. Wait the installation to complete.

g. The Java Setup - Complete screen appears. Click Close.

h. Re-launch UniFi-installer.exe and clickInstall.

5. Wait for the installation to complete.

6. Ensure that the Start UniFi Controller after installation option is selected and click Finish.

7. Proceed to UniFi Controller Software Configuration on page 6.

UniFi AP-AC PRO Setup Guide | May 15, 2019 | 6

6 NETWORK SETUP (USING AN EXISTING NETWORK /

DHCPSERVER)

The instructions in this section of the document outline how to set up the network on the AP for use with

SquirrelCloud POS.

6.1 UniFi Controller Software Configuration

1. If the UnFi Controller software is not open after the installation or has been closed, run it from the start

menu.

2. Click Launch a Browser to Manager theNetwork.

NOTE: If Chrome is not set up as your default browser, open Chrome and navigate to

https://localhost:8443/ in the Chrome browser instead.

3. The UnFi Setup Wizard page appears. Select your country and timezone and click Next.

4. Select the device you wish to configure and click Next.

UniFi AP-AC PRO Setup Guide | May 15, 2019 | 7

5. Create a secure primary wireless network for the UniFi AP.

a. Enter the wireless network name (SSID) in the Secure SSID field.

b. Enter a password for the network in the Security Key field.

c. Leave "Enable Guest Access" unchecked.

d. Click Next.

6. Skip configuring the primary wireless network for now. This will be done later.

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti UniFi UAP-FlexHD Bedienungsanleitung

Ubiquiti

Ubiquiti airGateway-LR Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-LR Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Dream Machine Beacon Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch Flex Mini Bedienungsanleitung

Ubiquiti

Ubiquiti IsoStation AC Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi AP BeaconHD Bedienungsanleitung

Ubiquiti

Ubiquiti BulletAC-IP67 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-PRO UNIFI Bedienungsanleitung

Ubiquiti

Ubiquiti UF-Nano Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-Outdoor Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation AC Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Bedienungsanleitung

Ubiquiti

Ubiquiti LiteBeam AC GENZ Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi WiFi BaseStation XG Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam AC PBE-5AC-620 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Wifi BaseStationXG Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam 5AC Gen 2 NBE-5AC-Gen2 Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket R5AC-Lite Bedienungsanleitung

Ubiquiti

Ubiquiti Rocket M3 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-nanoHD Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStatonM Series Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF-24HD Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam AC GENZ Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung