Ubiquiti UNIFI UAP-AC-IW-PRO Bedienungsanleitung

In-Wall 802.11ac Pro

Wi-Fi Access Point

Model: UAP-AC-IW-PRO

Introduction

Thank you for purchasing the Ubiquiti Networks® UniFi®AC

In‑Wall Pro Wi‑Fi Access Point. This Quick Start Guide is

designed to guide you through installation and also includes

warrantyterms.

IMPORTANT: UniFi Controller v5.4 is recommended

for managing the UAP‑AC‑IW‑PRO and is available for

download at: www.ubnt.com/download/unifi

Package Contents

Cover Plate UAP‑AC‑IW‑PRO Back Plate Wall‑Mount Screws

(Qty. 4)

In-Wall802.11acPro

Wi-FiAccess Point

Model:UAP-AC-IW-PRO

Torx Screws

(Qty. 2)

Phillips Screws

(Qty. 2)

Torx Security

Screw

Phillips Security

Screw

Quick Start

Guide

Installation Requirements

• Pre-installed electrical wall box

• Category 5 (or above) UTP cabling approved for indoor use

• Phillips and flathead screwdrivers

• T10 Security Torx bit (for Security Torx Screw option)

• UniFi Switch with PoE

IMPORTANT: The UAP‑AC‑IW‑PRO requires a UniFi

Switch with PoE for power. Passive PoE adapters are not

recommended.

operation within legal frequency channels, output power, indoor cabling requirements, and

Dynamic Frequency Selection (DFS) requirements.

System Requirements

• Linux, MacOSX, or Microsoft Windows 7/8/10

• Java Runtime Environment 1.6 (1.8 or newer recommended)

• Web Browser: Google Chrome (Other browsers may have

limited functionality.)

• UniFi Controller software v5.4 or newer (available at:

www.ubnt.com/download/unifi)

Network Topology Requirements

• A DHCP‑enabled network (for the AP to obtain an IP address

as well as for the wireless clients after deployment)

• A UniFi Cloud Key or management station running the UniFi

Controller v5.4 (or newer) software, located either on‑site

and connected to the same Layer 2 network, or off‑site in the

cloud or NOC

UAP-AC-IW-PRO

US-48-500W

USG-PRO-4

(DHCP Server)

Internet

UAP-AC-PRO

UAP-AC-M-PRO

UAP-AC-HD

LAN

WAN

UniFi Cloud Key

(UniFi Controller)

Remote Access to

UniFi Controller

Sample Network Diagram

All UniFi devices support off‑site management controllers. For

setup details, see the User Guide on the website:

www.ubnt.com/download/unifi/

Hardware Overview

Back Panel

PoE In + Data

PoE In + Data 10/100/1000 Ethernet port supports data and

802.3at PoE+ input. The UAP‑AC‑IW‑PRO itself requires 10W.

802.3at PoE+ input is required to use PoE passthrough.

Connect this port to a UniFi Switch with PoE that is connected

to your LAN and DHCP server.

Bottom Panel

Data

Reset

PoE Out

+ Data Security

Screw

PoE Out + Data 10/100/1000 Ethernet port supports data and

PoE passthrough (requires 802.3at PoE+ input). The maximum

PoE passthrough output is 12W.

Note: To power and connect an 802.3af device to

the LAN, you must use 802.3at PoE+ input.

Security Screw (Optional) The Security Screw secures the

Cover Plate after installation. You have the option to use the

included Torx (shown) or Phillips Security Screw.

Data 10/100/1000 Ethernet port supports data only. Used to

connect a client device to the LAN.

Reset The Reset button serves two functions for the

UAP‑AC‑IW‑PRO:

• Restart Press and release the Reset button quickly.

• Restore to Factory Default Settings Press and hold the

Reset button for more than five seconds.

LED

Color State Status

White

Flashing Initializing.

Steady Factory defaults, waiting for

integration.

White/

Blue

Alternating Device is busy; do not touch or

unplug it. This usually indicates

that a process such as a firmware

upgrade is taking place.

Blue

Steady Successfully integrated into a

network and working properly.

Flashing This is used to locate a device.

When you click Locate in the UniFi

Controller software, the LED will

flash blue. The software will also

display the location of the AP on

themap.

*640-00306-02*

640-00306-02

Security Tab

In addition to the optional Security Screw, the Security Tab

helps to secure the Cover Plate after installation. If you need to

remove it, use a flathead screwdriver to depress the Security

Tab while detaching the Cover Plate:

Security Tab

Back Plate

The Back Plate offers a variety of mounting holes for use

with different wall boxes. Here are a few examples with the

appropriate mounting holes outlined in blue:

USA or China

Europe

Hardware Installation

An electrical wall box should be pre‑installed with an Ethernet

cable running from the box to a UniFi Switch with PoE.

1. Detach the UAP‑AC‑IW‑PRO from the Back Plate.

2. Pull the Ethernet cable through the Back Plate, and attach

the Back Plate to the wall box using the Wall‑MountScrews.

Note: Do not over‑tighten the screws.

3. Connect the Ethernet cable in the wall box to the port

labeled PoE IN + DATA.

4. Attach the UAP‑AC‑IW‑PRO to the Back Plate using the two

Torx or Phillips Screws.

Inhaltsverzeichnis

Andere Ubiquiti Drahtloser Zugangspunkt Handbücher

Ubiquiti

Ubiquiti Bullet M5 HP Bedienungsanleitung

Ubiquiti

Ubiquiti LiteBeam LBE-5AC-16-120 Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-IW-HD Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF 60 Bedienungsanleitung

Ubiquiti

Ubiquiti LiteBeam AC GENZ Bedienungsanleitung

Ubiquiti

Ubiquiti airCube ISP Bedienungsanleitung

Ubiquiti

Ubiquiti Loco5AC-US Bedienungsanleitung

Ubiquiti

Ubiquiti RP5AC-PRISM Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-PRO UNIFI Bedienungsanleitung

Ubiquiti

Ubiquiti UAP-IW-HD Bedienungsanleitung

Ubiquiti

Ubiquiti PBE-M5-300-US Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-PRO Bedienungsanleitung

Ubiquiti

Ubiquiti RocketM Series Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStatonM Series Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP-AC-LR-5-EU Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam AC PBE-5AC-620 Bedienungsanleitung

Ubiquiti

Ubiquiti airFiber AF 60 Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam M5-16 Bedienungsanleitung

Ubiquiti

Ubiquiti U-Installer Bedienungsanleitung

Ubiquiti

Ubiquiti PowerBeam PBE-5AC-400-ISO Bedienungsanleitung

Ubiquiti

Ubiquiti RocketM Series Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi UAP--AC--HD Bedienungsanleitung

Ubiquiti

Ubiquiti UniFI UAP-AC Bedienungsanleitung

Ubiquiti

Ubiquiti NanoBeam M2 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung

Draytek

Draytek VIGORAP 902 Bedienungsanleitung

EnGenius

EnGenius EAP350 Bedienungsanleitung