Uplus Lighting 250 BEAM Bedienungsanleitung

User manual

250 BEAM

Please read the instructions carefully before use

TABLE OF CONTENTS

1. Safety Instructions……………………………………………………………………………3-4

Technical Specifications…………………………………………………………………………4

Control Menu ……………………………………………………………………………………5-6

DMX Channels ……………………………………………………………………………………6-9

Trouble Shooting…………………………………………………………………………………10

Fixture Cleaning………………………………………………………… ………………………10

STATEMENT

The product has well capability and intact packing when leave factory. All of the user should

comply with warning item and manual, any misuse cause of the damages are not included in our

guarantee, and also can not be responsible for any malfunction & problem owing to ignore the

manual.

1.Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction booklet.

•Unpack and check carefully there is no transportation damage before using the unit.

•Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

•It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

•The unit is for indoor use only. Use only in a dry location.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces. Be sure that no ventilation slots are blocked.

•Disconnect main power before replacement or servicing.

•Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

•Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always

by taking its base.

•Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher

than this Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand

during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before

replacing or serving.

•the event of serious operating problem, stop using the unit immediately.Never try to repair the unit

by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always use the same type spare parts.

•DO NOT touch any wire during operation as high voltage might be causing electric shock.

Warning:

•To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

•The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Caution:

•There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any

repairs yourself. In the unlikely event your unit may require service, please contact your nearest

dealer.

Installation:

•The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly

fixed to avoid vibration and slipping while operating. And make sure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also

always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

•The equipment must be fixed by professionals. And it must be fixed at a place where is out of the

touch of people.

2.Technical Specifications

Ballast: E-ballast

Light source: 250W bulb

Color temperature: 8500 k

The life of the bulb: 2000 hours

Voltage: AC110-240v

Frequency: 50 /60 hz

Total power: 450 w

Prism: Double prism effect, one 24 prism+one 8 prism, two prism can be superimposed

Color wheel: 13 colors+white, with rotating rainbow effect, a six-color plate for rainbow effect

Gobo wheel: 17 gobos+ white, with rotating gradient effect and gobo swing effect Strobe: up to 13

times per second with randon pulse strobe

Movement: Pan 540°; Tilt: 250°(16 bit scanning)

Dimming:0-100% linear adjustment

Atomization: 0-100% linear atomization

Control signal: international standard DMX512

Channel mode: 16/20 channel model

Protection grade: IP20

Dimension:320x230x530mm; NW:16 kg

3.Control Menu

Menu Operation

On the base of the control panel offers a number of features, such as setting DMX fixture address,

switch the lamp, run the test program, the mode selection.

Main Menu

Second

Third

Fourth

Dmx Address

000 - 512

Fixture

Dmx Mode

STD / EXT

Run Mode

DMX / Host

Pan Invert

Close / Open

Tilt Invert

Close / Open

Lamp On Power

Close / Open

Lamp Control

Close / Open

Manual

Color

000 - 255

Strobe

000 - 255

Dimmer

000 - 255

Fix Gobo

000 - 255

⁞

Information

Time

Current Time

xxxH

Total Time

xxxH

Power Count

xxx

Sensor

Pan

Tilt

Temp

⁞

Software Version

Panel

Vx.xx

Motor1

Vx.xx

Motor2

Vx.xx

Factory

Password

000 - 255

Pan

000 - 255

Tilt

000 - 255

Strobe

000 - 255

Color

000 - 255

Fix Gobo

000 - 255

⁞

Fixture Reset

XY Reset

OFF / Run

Motor Reset

OFF / Run

All Reset

OFF / Run

Factory

OFF / Run

Display

Language

CH / EN

Display Flip

Normal / Reverse

Display Mode

60s / Show

4.DMX Channels

Model - CH16/CH20

Standard mode

（16CH)

Extended mode

（20CH）

DMX Value

Function

Color

0-4

White

5-9

White+Color1

10-14

Color1

15-19

Color1+Color2

20-24

Color2

25-29

Color3+Color3

30-34

Color3

35-39

Color3+Color4

40-44

Color4

45-49

Color4+Color5

50-54

Color5

55-59

Color5+Color6

60-64

Color6

65-69

Color6+Color7

70-74

Color7

75-79

Color7+Color8

80-84

Color8

85-89

Color8+Color9

90-94

Color9

95-99

Color9+Color10

100-104

Color10

105-109

Color10+Color11

110-114

Color11

115-119

Color11+Color12

120-124

Color12

125-129

Color12+Color13

130-134

Color13

135-139

Color13+White

140-149

White

150-199

FAST ROTATION - SLOW ROTATION

200-205

STOP

206-255

SLOW ROTATION - FAST ROTATION

Shutter

0-3

Closed

4-103

SLOW - FAST

104-107

Open

108-207

FAST STROBE-SLOW STROBE

208-212

Open

213-251

RANDOM SLOW - FAST

252-255

Open

Dimmer

0－255

Linear Dimmer

Gobo 1

0-4

white

5-9

Gobo 1

10-14

Gobo 2

15-19

Gobo 3

20-24

Gobo 4

25-29

Gobo 5

30-34

Gobo 6

35-39

Gobo 7

40-44

Gobo 8

45-49

Gobo 9

50-54

Gobo 10

55-59

Gobo 11

60-64

Gobo 12

65-69

Gobo 13

70-79

Gobo 1 Jitter

80-89

Gobo 2 Jitter

90-99

Gobo 3 Jitter

100-109

Gobo 4 Jitter

110-119

Gobo 5 Jitter

120-129

Gobo 6 Jitter

130-139

Gobo 7 Jitter

140-149

Gobo 8 Jitter

150-159

Gobo 9 Jitter

160-169

Gobo 10 Jitter

170-179

Gobo 11 Jitter

180-189

Gobo 12 Jitter

190-199

Gobo 13 Jitter

200-225

FAST ROTATION - SLOW ROTATION

226-229

STOP

230-255

SLOW ROTATION - FAST ROTATION

Prism1

0-127

Reserve

128-255

prism1

Prism2

0-127

Reserve

128-255

prism2

Prism-2 Rot

0－127

Rotation

128-190

FAST ROTATION - SLOW ROTATION

191-192

STOP

193-255

SLOW ROTATION - FAST ROTATION

Frost

0-127

white

128-191

Frost

192-255

6 Colors

Foucs

0-255

Foucs，Linear

0－255

Pan 8bit

0－255

Pan 16bit

0－255

Tilt 8bit

0－255

Tilt 16bit

0－255

P/T Speed

Reset

50-99

Pan&Tilt Reset

100-149

Effect Reset

150-199

All Reset

Function

100-149

Lamp ON

150-199

Lamp OFF

0－255

Reserve

Color speed

0-255

Fast to Slow

Gobo speed

0-255

Fast to Slow

Focus speed

0-255

Fast to Slow

5.Trouble Shooting

ollo

ing

few

oble

y occu

uring

ope

tion

. He

tion

leshooting

The

does

work

, no

ght

Check

nect

ion of p

owe

eas

ure

ins

volt

Check

pow

LED

responding

LED

on.

che

nectors,

link

ope

If th

nd no

espons

el,

che

ess

etti

s a

ity

nter

ittent

oble

che

ins

onn

ecto

PCB

nit

the

iou

ntroller

Check

or run

lon

volta

les

terfer

ence

inter

face

circui

. One

the

cha

ing

tep

moto

dam

the

nect

to th

PCB

oken.

oto

’

ive

PCB

ndition

6.Fixture Cleaning

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to

optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,

smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

Inhaltsverzeichnis

Andere Uplus Lighting Beleuchtungsausrüstung Handbücher

Uplus Lighting

Uplus Lighting 37X15ZWASH Bedienungsanleitung

Uplus Lighting

Uplus Lighting 10X30 COB BAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting PIXEL IP20X15 BAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting 200 LED BSW Bedienungsanleitung

Uplus Lighting

Uplus Lighting RETRO 360 Bedienungsanleitung

Uplus Lighting

Uplus Lighting 6 EYE RETRO BAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting 360 BEAM Bedienungsanleitung

Uplus Lighting

Uplus Lighting 150COBPAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting IP 300Z SPOT-WW Bedienungsanleitung

Uplus Lighting

Uplus Lighting 250 LED BEAM Bedienungsanleitung

Uplus Lighting

Uplus Lighting IP-L360 Bedienungsanleitung

Uplus Lighting

Uplus Lighting BAR 6 LASER Bedienungsanleitung

Uplus Lighting

Uplus Lighting LED PROFILE MZ Bedienungsanleitung

Uplus Lighting

Uplus Lighting 460LED BSW Bedienungsanleitung

Uplus Lighting

Uplus Lighting W3725 Bedienungsanleitung

Uplus Lighting

Uplus Lighting 400 BLINDER Bedienungsanleitung

Uplus Lighting

Uplus Lighting 230 BEAM Bedienungsanleitung

Uplus Lighting

Uplus Lighting IR 1210 PAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting IP-Z740 Bedienungsanleitung

Uplus Lighting

Uplus Lighting PF350 Bedienungsanleitung

Uplus Lighting

Uplus Lighting IP1000 Strobe Bedienungsanleitung

Uplus Lighting

Uplus Lighting 3010 IP PAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting MIX560 Bedienungsanleitung

Uplus Lighting

Uplus Lighting 200 BLINDER Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung