Uplus Lighting IR 1210 PAR Bedienungsanleitung

User manual

IR 1210 PAR

Please read the instructions carefully before use

TABLE OF CONTENTS

1. Safety Instructions……………………………………………………………………………3-4

Technical Specifications…………………………………………………………………………4

Control Menu ………………………………………………………………………………………5

DMX Channels ……………………………………………………………………………………6

Dimension …………………………………………………………………………………………6

Trouble Shooting…………………………………………………………………………………7

Fixture Cleaning………………………………………………………… ………………………7

STATEMENT

The product has well capability and intact packing when leave factory. All of the user should

comply with warning item and manual, any misuse cause of the damages are not included in our

guarantee, and also can not be responsible for any malfunction & problem owing to ignore the

manual.

1.Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction booklet.

•Unpack and check carefully there is no transportation damage before using the unit.

•Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

•It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

•The unit is for indoor use only. Use only in a dry location.

•The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces. Be sure that no ventilation slots are blocked.

•Disconnect main power before replacement or servicing.

•Make sure there are no flammable materials close to the unit while operating as it is fire hazard.

•Use safety cable when fixes this unit. DO NOT handle the unit by taking its head only, but always

by taking its base.

•Maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher

than this Unit surface temperature may reach up to 85℃. DO NOT touch the housing bare-hand

during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before

replacing or serving.

•the event of serious operating problem, stop using the unit immediately.Never try to repair the unit

by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always use the same type spare parts.

•DO NOT touch any wire during operation as high voltage might be causing electric shock.

Warning:

•To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

•The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Caution:

•There are no user serviceable parts inside the unit. DO NOT open the housing or attempt any

repairs yourself. In the unlikely event your unit may require service, please contact your nearest

dealer.

Installation:

•The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly

fixed to avoid vibration and slipping while operating. And make sure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also

always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

•The equipment must be fixed by professionals. And it must be fixed at a place where is out of the

touch of people.

2.Technical Specifications

Voltage: AC100-240V, 50/60Hz

Power: 130W

Light Source: 12X10W RGBW 4in1 ultra bright LED

Lifespan: around 50,000-100,000 hours

Control: DMX 512,4/8 channels

Control mode: DMX 512, Auto mode, Master/Slave Mode,Sound Mode, Remote control

Display: LED display with 4 buttons

Heat dissipation: intelligent temperature control, no fan,no noise

Power connection: Power con connectors input/output

Data connection: 3-pin DMX connectors input/output

LED life: 50,000-100,000 hours

IP rating: IP20

Beam angle: 25 º

Net Weight：2.6KG

3.Control Menu

[MENU] menu selection or return to previous menu.

[UP] press [UP] through the menu list to increase/change the value of the current function.

[DOWN] press [DOWN] through the menu list to decrease/change the value of the current function.

[ENTER] confirm & quit out current function setting.

Function

A001

A001—A512

DMX Address 001-512

Chnd

4CH

4 channels mode

8CH

8 channels mode

CL01

CL01—CL15

15 static color mixing modes, color selection by up and down keys

Strobe mode St00-St16 after confirmation, adjust by up and down keys

CC99

CC01-CC99

Color Change, Speed from slow to fast (01-99)

EE99

EE01-EE99

Color Pulse,Speed from slow to fast (01-99)

FF99

FF01-FF99

Color Gradient,Speed from slow to fast (01-99)

ST99

ST01-ST99

Strobe, 01-99

SOU1

Sound mode 1

SOU2

Sound mode 2

SOU3

Sound mode 3

SOU4

Sound mode 4

IRCL

ON/OFF

Remote control ON/OFF

R255

R000-R255

R manual dimming

G255

G000-G255

G manual dimming

B255

B000-B255

B manual dimming

W255

W000-W255

W manual dimming

T000

OFF/70-100

Display current temperature

4.DMX Channels

4 CH Mode

Channel

Function

DMX Value

Description

CH1

R Dimmer

0-255

Red dimming from dark to bright

CH2

G Dimmer

0-255

Green dimming from dark to bright

CH3

B Dimmer

0-255

Blue dimming from dark to bright

CH4

W Dimmer

0-255

White dimming from dark to bright

8 CH Mode

5.Dimension

Channel

Function

DMX Value

Description

CH1

Dimmer

0-255

Dimmer,0-100%

CH2

Red

0-255

Red dimming,0-100%

CH3

Green

0-255

Green dimming,0-100%

CH4

Blue

0-255

Blue dimming,0-100%

CH5

White

0-255

White dimming,0-100%

CH6

Strobe

0-10

No function

11-255

Strobe from slow to fast

CH7

Auto Mode

0-9

No function

10-50

Static Colors (CH8

choose color)

51-100

Colors Jump

101-150

Colors Fade

151-200

Colors Pulse

201-220

Sound Mode 1

221-240

Sound Mode 2

241-255

Sound Mode 3

CH8

Auto

Speed

0-255

Auto speed, slow to fast

6.Trouble Shooting

ollo

ing

few

oble

y occu

uring

ope

tion

. He

tion

leshooting

The

does

work

, no

ght

Check

nect

ion of p

owe

eas

ure

ins

volt

Check

pow

LED

responding

LED

on.

che

nectors,

link

ope

If th

nd no

espons

el,

che

ess

etti

s a

ity

nter

ittent

oble

che

ins

onn

ecto

PCB

nit

the

iou

ntroller

Check

or run

lon

volta

les

terfer

ence

inter

face

circui

. One

the

cha

ing

tep

moto

dam

the

nect

to th

PCB

oken.

oto

’

ive

PCB

ndition

7.Fixture Cleaning

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to

optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,

smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.

Clean with soft cloth using normal glass cleaning fluid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.

Inhaltsverzeichnis

Andere Uplus Lighting Beleuchtungsausrüstung Handbücher

Uplus Lighting

Uplus Lighting BAR 6 LASER Bedienungsanleitung

Uplus Lighting

Uplus Lighting MIX560 Bedienungsanleitung

Uplus Lighting

Uplus Lighting IP 300Z SPOT-WW Bedienungsanleitung

Uplus Lighting

Uplus Lighting 200 MZ-SPOT PR Bedienungsanleitung

Uplus Lighting

Uplus Lighting 280 LED BSW Bedienungsanleitung

Uplus Lighting

Uplus Lighting COB400 ZOOM Bedienungsanleitung

Uplus Lighting

Uplus Lighting 360 BEAM Bedienungsanleitung

Uplus Lighting

Uplus Lighting 150COBPAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting 250 LED BEAM Bedienungsanleitung

Uplus Lighting

Uplus Lighting MINI740 Bedienungsanleitung

Uplus Lighting

Uplus Lighting 20 MINI SPOT Bedienungsanleitung

Uplus Lighting

Uplus Lighting 6 EYE RETRO BAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting BL6 Bedienungsanleitung

Uplus Lighting

Uplus Lighting W3725 Bedienungsanleitung

Uplus Lighting

Uplus Lighting BR360 Bedienungsanleitung

Uplus Lighting

Uplus Lighting IP-Z740 Bedienungsanleitung

Uplus Lighting

Uplus Lighting PIXEL IP20X15 BAR Bedienungsanleitung

Uplus Lighting

Uplus Lighting 400 BLINDER Bedienungsanleitung

Uplus Lighting

Uplus Lighting 750 BSWF Bedienungsanleitung

Uplus Lighting

Uplus Lighting 460LED BSW Bedienungsanleitung

Uplus Lighting

Uplus Lighting IP1000 Strobe Bedienungsanleitung

Uplus Lighting

Uplus Lighting BSW 350 Bedienungsanleitung

Uplus Lighting

Uplus Lighting 250 BEAM Bedienungsanleitung

Uplus Lighting

Uplus Lighting RETRO 360 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung