VarTech Systems DiamondVue VT150P Bedienungsanleitung

VT150 DiamondVue Series User Guide 150-005

VT150 DiamondVue Series

15.0” Flat Panel Series LCD Monitors

VT150P · VT150P-SS · VT150PI

VT150R · VT150W · VT150M

Transflectives:

VT150PTSR · VT150PSSTSR

VT150RTSR · VT150WTSR · VT150MTSR

VarTech Systems Inc.

Solutions for Demanding Applications

Industrial CRT and Flat Panel Displays

User’s Guide

Read these instructions completely before attempting to operate your new Color Display.

Table Of Contents

Page Page

Section 1 Section 4

Introduction 1 Touch screen 10

1.1 About LCD Monitors 1 4.1 Introduction 10

1.2 Product Safety Precautions 2 4.2 Installation 10

Section 2 Section 5

Display Setup 3 Troubleshooting Tips 11-12

Display Features 3

2.1 Unpacking The Display 4 Section 6

2.2 Included Parts 4 Cleaning & Maintenance 13

2.3 Connecting Your Display 4

2.4 Signal Connections 4-5 Section 7

Mechanical Drawings 14

Section 3 7.1 Panel Mount Procedure 14

Getting Started 6 Panel Mount Mechanical 15-16

3.1 Adjusting the Display 6 Rack Mount Mechanical 17

3.2 Adjustment Procedure 7-9 Wall Mount Mechanical 18

Intecolor Configured Mechanical 19-20

Section 8

Display Specifications 21

VT150 DiamondVue Series User Guide 150-005

LCDs

INTRODUCTION

Section

About LCD Monitors

What you gain by using an LCD monitor in your industrial controls

are the future of display technology. Although CRTS have dropped in

cost significantly, they do not offer the performance, reliability, and

mounting options available with LCDs. LCD monitors consist primarily

of an LCD, Video Board and a Back Light video. The LCD determines

1.1

the function of the video board which converts the analog RGB (Red, Green, Blue) signals from a

standard video card to a high quality, digital RGB that the LCD can display.

Recently the video card has taken on a new role. It is the responsibility of this device to “scale” a

particular video resolution to the “native” resolution of the LCD. Simply, consider that a computer is

putting out a VGA [640x480] resolution signal, yet the LCD that is connected is an XGA

[1024x768] display. The displayed picture would be in the center 1/3 of the LCD. With the

introduction of the scaling engine. The converter will mathematically recalculate the 640x480 to

1024x768. This may sound simple but it is in fact a complex algorithm that adjusts for different

aspect ratios and pixel alignment, essentially smoothing text and graphics to produce a picture

that is pleasant to the eye.

All Vartech displays from 12.1” (800x600) to 23.1 (1600x1200) incorporate scaling engines in the

converter card.

Product Safety Precautions

⇒ Ensure that sufficient space is available around the display to provide the circulation

necessary for cooling.

⇒ Ensure that the ambient air temperature will not exceed the specified maximum

temperature.

⇒ Do not attempt to service this display yourself. The rear chassis has a seal so that non

qualified personal will not expose themselves to dangerous voltages or other risks.

⇒ To protect from electrical shock, unplug the display power supply from the wall before

moving.

⇒ Do not expose the display to direct sunlight or heat.

⇒ Do not use this display near water

⇒ Do not place any heavy objects on the power cords. Damage may cause electrical shock.

⇒ Unplug the power supply from the wall or unit if one of the following conditions exists.

⇒ Power cord or plug is damaged or frayed

⇒ Liquid is spilled into the display or the display is exposed to rain or water.

⇒ The display does not operate normally when the operating instructions are

followed.

⇒ The display has been dropped or the enclosure has been damaged.

⇒ The display exhibits a distinct change in performance, indicating a need for

service.

1.2

VT150 DiamondVue Series User Guide 150-005

Section

DISPLAY SETUP

VT150 Series Display Features

⇒ Capable of displaying unlimited colors in a continuous spectrum. The high contrast LCD

enhances the image with no geometric distortion.

⇒ The VT150 DiamondVue Series directly accepts an analog 5 wire RGB with separate H/V sync

or 4 wire RGB with separate combined sync or 3 wire SOG.

⇒ The VT150 DiamondVue Series is auto synchronous adjusting the display to the appropriate

input between VGA, SVGA,XGA, and SXGA.

⇒ The VT150 DiamondVue Series is available in Panel Mount, Rack Mount, or Wall Mount

industrial packages.

⇒ The VT150 DiamondVue Series is supplied with a Anti-Reflective Screen unless equipped with

an optional Touch System.

⇒ The VT150 DiamondVue Series has an integrated 115/220VAC supply as standard on all

models. Optional DC voltage available.

2.1

⇒ VT150R, VT150P, VT150PSS, VT150M, VT150W, VT150PI LCD Monitor or

VT150PTSR, VT150PSSTSR, VT150RTSR, VT150WTSR or VT150MTSR Transflective

⇒ 5 ft Video Cable

⇒ 10-32 Mounting Hardware. (For use with Panel Mount only)

⇒ 6 ft RS232 Touch Interface Cable (Optional when touch is installed)

⇒ CD ROM with Touch Screen Drivers (Optional when touch is installed)

⇒ Users Guide (Printed or on CD)

2.2 Unpacking and setting up your display

Your LCD monitor package will consist of the components listed below. Open shipping

container and lay all components on a flat clean surface.

2.3 What is included with your display

2.4 Connecting the Display

1. Connect all cables to the computer first. This would include the VGA cable and the optional

RS 232 serial touch screen connection.

2. After connecting the cables between the LCD monitor and the computer, plug the customer

supplied +12VDC source to the 12V connection on the rear.

3. Once the +12V connection is made, the display is active.

4. If your computer was off, turn on your computer.

5. Your display should now operate as a normal computer display showing your windows or

whatever video is being sent to the flat panel.

Note: If for any reason the display goes blank and gives an “out of Range” or “No Input Signal”,

your computer or video source is putting out a signal that is out of range of the LCD’s video

board. If this happens, reboot the computer or video source and make sure you are inputting

the correct signal. If the display doesn’t work properly, it may be because:

(a) The resolution is to high or low for the LCD.

(b) The refresh rate is set to high. Refresh on an LCD is different than a CRT. Set the refresh to

60Hz. CRT’s need a high refresh rate to avoid flicker. The refresh rate has no impact on

LCD’s.

(d) The unit is malfunctioning. If you believe this to be true, disconnect the video cable from the

rear of the LCD and connect to a known good computer CRT display. If the computer

display is working satisfactory and the video is within the appropriate range, then contact

Vartech Customer service for a RMA number at 800-223-8050.

2.5 Signal Connections

To avoid irregular operation and /or damage to the display, please insure correct video is being

supplied as shown on the following page.

VT150 DiamondVue Series User Guide 150-005

2.5 Signal Connections Cont.

You can use an HD-15 connector cable or a BNC adapter cable to connect the flat panel

monitor to the host computer. The HD-15 video cable (supplied in the kit) you use with this

monitor is equipped with a conventional HD-15 connector at each end.

Note: The following figure is the view looking into the pin end of the male connector or solder

term end of the female connector.

Pin Signal (HD15) Pin Signal (HD15) Pin Signal (HD15)

1 Red Video 6 Red Video Ground 11 Ground

2 Green Video 7 Green Video Ground 12 DDC Data

3 Blue Video 8 Blue Video Ground 13 Horizontal Sync

4 Ground 9 No Connection 14 Vertical Sync

5 Ground (DDC Return) 10 NGD-Sync / Self Test 15 DDC Clock

Composite Video Input Connector: CVBS 1.0V p-p

S-Video: S-VHS

LUMA Signal Input 0.7V p-p

CHROMA Signal Input 0.7V p-p

HD-15 Video Connector

The following table provides the pin numbers

and corresponding pin assignments for the

HD-15 video connector.

Optional BNC Adaptor Cable

A 5BNC-to-HD15 adapter cable is available. The functions of the cables are described below.

⇒ R, B, and G: Red, Green, and Blue input connectors to establish color.

These are used for RS-343 analog signals.

⇒ HS/CS: Separate horizontal/composite sync signal from the video

source.

⇒ VS: Separate vertical sync signal from the video source.

BNC Adapter Cable

This table describes the signal types you can use with the connectors:

2.5 Signal Connections Cont.

BNC Signal Type Description R G B HS/ CS VS

Sync-on-Green

(Not Available)

Use the three video connectors.

Horizontal and vertical syncs are

supplied on the green video line.

X X X

Composite Sync

(Not available)

Use the three video connectors

plus the horizontal sync/

composite sync input

X X X X

Separate Horizontal

and Vertical Sync.

Use the three video connectors

plus the horizontal sync/

composite sync and vertical sync

input.

X X X X X

BNC Signal Types

VT150 DiamondVue Series User Guide 150-005

GETTING STARTED

Section

3.1 Adjusting the display

The VT150 DiamondVue Series display has an embedded microprocessor in the converter

card. Once you have the unit displaying the resolution you desire for your application do the

following:

In order to navigate to the appropriate adjustments, press Menu (or MODE)and the OSD

layout chart will appear as indicated as shown below.

There are four membrane buttons located on the unit. They will activate the OSD and allow

navigation to all adjustments if your unit requires adjustment.

Press MENU (or MODE) and a major adjustment category will appear. Press DOWN or UP

and you will see the remaining adjustment categories. Press SEL to select a category or item

for adjustment. The actual adjustment categories are listed under each major category (bold)

as shown below.

Definition of OSD (on screen display) Adjustments

3.2

MODE

CATEGORY DESCRIPTION

PICTURE Brightness, Contrast, Clock, Phase, H Position, V Position

ADVANCED Color temp, User red, User green, User blue, Gamma

OPTION OSD, OSD H pos, OSD V pos, Backlight

UTILITY OSD Timeout, OSD background, auto adjust, factory reset,

power on time, backlight on time

PICTURE Brightness, Contrast, Color, Tint, Sharpness

VIDEO Video format, Video type

3.3 Adjustment

OSD Agent Description

Picture

Used to fine tune and get the best

image by removing noises that create

unstable images with jitters and

shimmers.

Brightness Adjusts the brightness of PC RGB’s

brightness.

Contrast Adjusts the contrast of PC RGB’s

contrast.

Clock Removes the noises. When frequency

value is wrong, the image has horizontal

lines especially in 1 dot on and off.

Phase Removes the noises. When phase

value is wrong, the image has vertical

lines especially in 1 dot on and off.

H Position Adjusts the horizontal position.

V Position Adjusts the vertical position.

OSD Agent Description

Advanced

Used to fine color and get the favorite

color by selecting items, otherwise

you can adjust each you want.

Color

Temp

Select Reddish color or Bluish

User Red Adjusts the color of Red.

User Green Adjusts the color of Green.

User Blue Adjusts the color of Blue

Gamma Adjusts the color characteristics

OSD Agent Description

Option

Used to move OSD window position.

OSD Moves the OSD Window quickly

OSD H pos Moves the OSD Window in the

horizontal direction.

OSD V pos Moves the OSD Window in the vertical

direction.

Backlight Adjusts the backlight.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere VarTech Systems Monitor Handbücher

VarTech Systems

VarTech Systems VTPC150XPE Bedienungsanleitung

VarTech Systems

VarTech Systems VT420W Bedienungsanleitung

VarTech Systems

VarTech Systems VT420 Series Bedienungsanleitung

VarTech Systems

VarTech Systems VT170CM Bedienungsanleitung

VarTech Systems

VarTech Systems ColorVue VT190PC Bedienungsanleitung

VarTech Systems

VarTech Systems VT121CC Bedienungsanleitung

VarTech Systems

VarTech Systems VT064P Bedienungsanleitung

VarTech Systems

VarTech Systems VT121 DiamondVue Series Bedienungsanleitung

VarTech Systems

VarTech Systems VT20A Bedienungsanleitung

VarTech Systems

VarTech Systems VTPC2100VS Bedienungsanleitung

VarTech Systems

VarTech Systems VT084XHB Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT201C Bedienungsanleitung

VarTech Systems

VarTech Systems VT320D Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT084C Bedienungsanleitung

VarTech Systems

VarTech Systems VT19B-PW Bedienungsanleitung

VarTech Systems

VarTech Systems vt550 series Bedienungsanleitung

VarTech Systems

VarTech Systems VT29B-M Bedienungsanleitung

VarTech Systems

VarTech Systems VT14A-D Bedienungsanleitung

VarTech Systems

VarTech Systems VT201CM Bedienungsanleitung

VarTech Systems

VarTech Systems VT181CH Bedienungsanleitung

VarTech Systems

VarTech Systems VT181R2 Bedienungsanleitung

VarTech Systems

VarTech Systems DiamondVue VT190C Bedienungsanleitung

VarTech Systems

VarTech Systems VT520 Bedienungsanleitung

VarTech Systems

VarTech Systems VT121XA4 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung