Vaxcel T0468 Gebrauchsanweisung

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

T0468

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

181029

Green Grounding

Screw (E)

Headless screw (D)

Mounting Screw (B) Wire Connector (C)

Lock Nut (F)

Mounting plate (A)

Ball Nut (G)

Glass Panel

Glass Frame

Clip

1. Thread two headless screws (D) through the mounting

plate (A), then secure them with four lock nuts (F) (two

on each side of the mounting plate). Adjust the length

of the headless screws (D) if necessary.

Note: Make sure that the headless screws (D) are lined up

horizontally, to ensure that the fixture will be level.

2. Attach the mounting plate (A) to the outlet box by using two

mounting screws (B).

3. Take a glass panel and gentle slide it into the glass frame

in place, secure it by pressing two clips on top side of the

glass frame and two clips on the bottom of the glass frame.

Repeat with the other glass panels. (See Fig.1)

Turn off the power at fuse or circuit box

Fig.1

Bulb Type B Max.60W

(not included)

House Grounding Wire

Fixture Grounding Wire

Wire Connector (C)

Mounting Plate (A)

Outlet Box

Fixture Wire

Lock Nut (F)

Back Plate

Photocell

Fixture

Rubber Pad (H)

Ball Nut (G)

Headless Screw (D)

Mounting Screw (B)

Green Grounding Screw (E)

Rubber Pad (H)

IMPORTANT:

The sensor has an excellent photocell function

to enable the light to turn on at dusk and off at

dawn automatically.

181029

4. Pull out the outlet wires and the house grounding wire from the outlet box. Make wire connections

using the wire connectors (C):

---Connect the black wire from the fixture to the black wire from the power source.

---Connect the white wire from the fixture to the white wire from the power source.

---Attach the fixture grounding wire to the mounting plate (A) with the green grounding screw (E).

Then connect it to the house grounding wire with a wire connector (C).

Carefully put the wires back into the outlet box.

5. Attach the back plate to the mounting plate (A) by inserting the headless screws (D), then secure it

with two rubber pads (H) and two ball nuts (G).

CAUTION: With silicone caulking compound, caulk completely around where the back

plate meets with the wall surface to prevent water from seeping into the outlet box.

6. Install a bulb (not included). See relamping label at socket area or packaging for maximum allowed

wattage.

Turn on the power at fuse or circuit box

1. Turn off the power at the main fuse or circuit breaker box before starting installation.

2. Loosen the wire connectors connected with the wires from photocell. (See Fig.2)

Note: Do not move the photocell to prevent water from seeping into the outlet box.

3. Take a white pigtail and black pigtail and make wire connections using wire connectors (C):

(See Fig.3)

a. The black wire from the fixture to one end of the black pigtail.

b. The white wire from the fixture to one end of the white pigtail.

c. The other end of the black pigtail to the black wire from the power source.

d. The other end of the white pigtail to the white wire from the power source.

Put all wires back into the back plate of the fixture.

Photocell

White Wires From Photocell

Wire Connector

Wires From Fixture

Wires From

Main Power

Wire Connector (C)

White Pigtail

Pigtail

Red Wires From Photocell

Black Wires From Photocell

Operation the Unit Without Photocell

Fig.2 Fig.3

181029

Assembly Kit

6000MM (1SET)

Glass X 4

10033RG

The following parts are available for re-order if damaged or missing.

Spare Parts List:

Green Grounding

Screw (E)

Headless screw (D)

Mounting Screw (B) Wire Connector (C)

Lock Nut (F)

Mounting plate (A)

Ball Nut (G) Rubber Pad (H)

A: 9-1/2"

B: 18.5"

C: 12-1/4"

Andere Vaxcel Außenleuchte Handbücher

Vaxcel

Vaxcel T0040 Gebrauchsanweisung

Vaxcel

Vaxcel T0572 Gebrauchsanweisung

Vaxcel

Vaxcel T0571 Gebrauchsanweisung

Vaxcel

Vaxcel T0395 Gebrauchsanweisung

Vaxcel

Vaxcel T0694 Gebrauchsanweisung

Vaxcel

Vaxcel T0696 Gebrauchsanweisung

Vaxcel

Vaxcel T0193 Gebrauchsanweisung

Vaxcel

Vaxcel T0700 Gebrauchsanweisung

Vaxcel

Vaxcel Theta T0612 Gebrauchsanweisung

Vaxcel

Vaxcel T0698 Gebrauchsanweisung

Vaxcel

Vaxcel T0521 Gebrauchsanweisung

Vaxcel

Vaxcel T0541 Gebrauchsanweisung

Vaxcel

Vaxcel T0365 Gebrauchsanweisung

Vaxcel

Vaxcel T0701 Gebrauchsanweisung

Vaxcel

Vaxcel T0258 Gebrauchsanweisung

Vaxcel

Vaxcel T0297 Gebrauchsanweisung

Vaxcel

Vaxcel T0595 Gebrauchsanweisung

Vaxcel

Vaxcel T0702 Gebrauchsanweisung

Vaxcel

Vaxcel T0363 Gebrauchsanweisung

Vaxcel

Vaxcel T0551 Gebrauchsanweisung

Vaxcel

Vaxcel Lambda T0627 Gebrauchsanweisung

Vaxcel

Vaxcel T0692 Gebrauchsanweisung

Vaxcel

Vaxcel T0624 Gebrauchsanweisung

Vaxcel

Vaxcel T0414 Gebrauchsanweisung

Beliebte Außenleuchte Handbücher anderer Marken

Sealey

Sealey LED37 Bedienungsanleitung

nordlux

nordlux VEJERS Benutzerhandbuch

SImx

SImx ELITE LED LHTC637 Bedienungsanleitung

GEV

GEV CAROLINE 10833 Bedienungsanleitung

NEBO

NEBO NEB-LSP-0020 Bedienungsanleitung

WE-EF

WE-EF PFL540 LED Bedienungsanleitung

Lindby

Lindby 9949029 Bedienungsanleitung

HEPER

HEPER DOGO Side LW6048.585-US Montage- und Bedienungsanleitung

HEPER

HEPER LW8034.003-US Montage- und Bedienungsanleitung

Maretti

Maretti VIBE S 14.6080.04.A Bedienungsanleitung

BEGA

BEGA 84 253 Handbuch

HEPER

HEPER MINIMO Montage- und Bedienungsanleitung

LIGMAN

LIGMAN BAMBOO 3 Bedienungsanleitung

Maretti

Maretti TUBE CUBE WALL 14.4998.04 Bedienungsanleitung

Maxim Lighting

Maxim Lighting Carriage House VX 40428WGOB Bedienungsanleitung

urban ambiance

urban ambiance UQL1273 Bedienungsanleitung

TotalPond

TotalPond 52238 Bedienungsanleitung

Donner & Blitzen

Donner & Blitzen 0-02661479-2 Bedienungsanleitung