Viavi FiberChek Bedienungsanleitung

FiberChek Video Inspection Probe

QUICK START GUIDE

Inspect, test, certify, and save with one device

QUICK START GUIDE2

Notice Every eort was made to ensure that the information in this document was accurate at the time

of printing. However, information is subject to change without notice, and Viavi reserves the

right to provide an addendum to this document with information not available at the time that

this document was created.

Innovation, and its logo are trademarks of Viavi Solutions. All other trademarks and registered

trademarks are the property of their respective owners. No part of this guide may be reproduced

or transmitted electronically or otherwise without written permission of the publisher.

Trademarks Viavi is a trademark of Viavi Solutions in the United States and other countries.

FCC Information Electronic test equipment is exempt from Part 15 compliance (FCC) in the United States.

European Union Electronic test equipment is subject to the EMC Directive in the European Union. The EN61326

standard prescribes both emission and immunity requirements for laboratory, measurement,

and control equipment. This unit has been tested and found to comply with the limits for a

Class A digital device.

Independent

Laboratory Testing

This unit has undergone extensive testing according to the European Union Directive and

Standards.

FiberChekVideo Inspection Probe 3

CHAPTER 1 INTRODUCTION .............................................................................................................................. 4

TABLE OF CONTENTS

CHAPTER 2 OVERVIEW..................................................................................................................................... 5–6

Device Layout .......................................................................................................................... 5

Using the Menu....................................................................................................................... 6

CHAPTER 3 OPERATION ................................................................................................................................7–10

Getting Started with PASS/FAIL Analysis .................................................................. 7–8

Setting up PASS/FAIL Analysis................................................................................. 7

Performing PASS/FAIL Analysis............................................................................... 8

Working with Groups....................................................................................................... 8–9

Creating a New Group ............................................................................................... 8

Closing the Current Group....................................................................................... 9

Syncing FiberChek with FiberChekPRO...................................................................9–10

Syncing FiberChek with FiberChekPRO using Wi-Fi........................................ 9

Syncing FiberChek with FiberChekPRO using Bluetooth............................10

Using the MP-60 Optical Power Meter with FiberChek ..........................................10

QUICK START GUIDE4

INTRODUCTION

Thank you for purchasing the FiberChek Video Inspection Probe!

Inspection of ber optic interconnects is essential for the optimal performance and longevity of ber

optic networks. Every time they are handled, ber connectors must be inspected to ensure no debris or

damage is present. Viavi has made this critical task easier than ever with the FiberChek inspection probe.

FiberChek's standalone operation, color touchscreen display, and Wi-Fi and Bluetooth connectivity allow

fast, reliable maintenance of optical connector quality.

CHAPTER 1 FiberChekVideo Inspection Probe

CHAPTER 2 FiberChekVideo Inspection Probe

OVERVIEW

FiberChekVideo Inspection Probe 5

Overview CHAPTER 2

QUICK START GUIDE6

Using the Menu

Many of FiberChek's features and settings can be found in the Menu. The Menu

is accessible from the Live Inspection View; tap the Touchscreen Display to

enter the Menu. (If FiberChek is displaying an analysis result or still image, return to

the Live Inspection View by pressing the Autofocus/Inspection Trigger once.)

• Select an item using the Manual Focus/Navigation Control.

• Press the Action Button to conrm a selection or view additional options.

• Press the Magnication/Return Button to return to the previous screen.

(Pressing the Magnication/Return Button from FiberChek's top-level Menu will

return to the Live Inspection View.)

• Press the Autofocus/Inspection Trigger at any time to return to the Live

Inspection View.

Navigating the

Menu:

OPERATION

FiberChekVideo Inspection Probe 7

CHAPTER 3 FiberChekVideo Inspection Probe

Getting Started with PASS/FAIL Analysis

1. From the Live Inspection View, tap the Touchscreen Display to enter the

Menu.

2. Select PROFILE using the Manual Focus/Navigation Control, then press the

Action Button.

3. Choose the desired inspection prole using the Manual Focus/Navigation

Control, then conrm your selection by pressing the Action Button.

4. Return to the Menu by pressing the Magnication/Return Button.

5. Select TIP using the Manual Focus/Navigation Control, then press the Action

Button.

6. Chose the desired tip using the Manual Focus/Navigation Control, then

conrm your selection by pressing the Action Button.

7. Return to the Live Inspection View by pressing the Autofocus/Inspection

Trigger once, or by pressing the Magnication/Return Button twice.

FiberChek is ready to perform PASS/FAIL Analysis.

Setting Up PASS/

FAIL Analysis:

8QUICK START GUIDE

Operation CHAPTER 3

1. From the Live Inspection View, press and hold the Autofocus/Inspection

Trigger. This will focus the ber automatically, then perform PASS/FAIL

analysis. (To focus the ber manually instead, adjust the Manual Focus/

Navigation Control until the Focus Quality Meter turns yellow or green. Then,

press the Action Button to perform PASS/FAIL analysis.)

2. FiberChek will briey display the analysis result, then enter the Analysis

Result View. A green screen with a "check" graphic indicates a PASS result. A

red screen wtih an "X" graphic indicates a FAIL result. To perform additional

actions from the Analysis Result View:

• Tap the Touchscreen Display to display or hide additional information.

The modes are No Overlay, Rings, and Rings + Table.

• Press the Magnication/Return Button to toggle between High

Magnication and Low Magnication of the ber.

• Press the Action Button to save the current analysis to FiberChek's

storage or current group. (See "Working with Groups.")

• Press the Autofocus/Inspection Trigger to return to the Live Inspection

View.

Performing PASS/

FAIL Analysis:

Working with Groups

You may nd it useful to collect several analysis results or still images into a group.

Saving completed PASS/FAIL analyses into a group makes it easy to keep track of

analyses from the same job. To begin adding analyses or images to a group:

1. From the Live Inspection View, tap the Touchscreen Display to enter the

Menu.

2. Select CREATE NEW GROUP using the Manual Focus/Navigation Control, then

press the Action Button.

3. Return to the Live Inspection View by pressing the Autofocus/Inspection

Trigger once, or by pressing the Magnication/Return Button twice. You

may begin perfoming PASS/FAIL analysis as usual. (See "Performing PASS/FAIL

Analysis.") Saving an analysis result will add it to the current group.

Creating a New

Group:

Operation CHAPTER 3

FiberChekVideo Inspection Probe 9

1. From the Live Inspection View, tap the Touchscreen Display to enter the

Menu.

2. Select CLOSE GROUP using the Manual Focus/Navigation Control, then press

the Action Button.

3. Return to the Live Inspection View by pressing the Autofocus/Inspection

Trigger once, or by pressing the Magnication/Return Button twice.

FiberChek will now save analysis results or still images without a group.

Closing the Current

Group:

Connecting FiberChek to FiberChekPRO or FiberChekMOBILE

By connecting the FiberChek Video Inspection Probe with Viavi's FiberChekPRO

desktop software or FiberChekMOBILE Apps, you can view inspection results on

your computer or mobile device, download data saved on the FiberChek Probe,

and keep your FiberChek's software up to date. FiberChek can connect with

FiberChekPRO using a USB cable or built-in WiFi or Bluetooth.

1. From FiberChek's Live Inspection View, tap the Touchscreen Display to enter

the Menu.

2. Select RADIO SETTINGS using the Manual Focus/Navigation Control, then

press the Action Button.

3. Select WIFI ENABLE using the Manual Focus/Navigation Control, then press

the Action Button. WIFI ENABLE will become highlighted.

4. For Android or iOS devices, navigate to your WiFi settings. Your FiberChek

probe will appear in the list of Available Devices. Select it and click the

"Connect" button.

5. Launch the FiberChekMOBILE App

6. Your FiberChek probe will appear in the list of Available Devices. Select it and

click the "Connect" button.

7. For Windows, launch FiberChekPRO, Navigate to FiberChekPRO's Setup

and select Wi-Fi from the navigation bar at the left. (Setup > FiberChekPRO

Setup...). Your FiberChek probe will appear in the list of Available Devices.

Select it and click the "Connect" button.

Connecting

FiberCheck using

Wi-Fi:

Operation CHAPTER 3

1. From FiberChek's Live Inspection View, tap the Touchscreen Display to enter

the Menu.

2. Select RADIO SETTINGS using the Manual Focus/Navigation Control, then

press the Action Button.

3. Select BT ENABLE using the Manual Focus/Navigation Control, then press the

Action Button. BT ENABLE will become highlighted.

4. For Android or iOS devices, navigate to your Bluetooth settings. Your

FiberChek probe will appear in the list of Available Devices. Select it and click

the "Connect" button.

5. Launch the FiberChekMOBILE App.

6. For Windows, launch FiberChekPRO, Navigate to FiberChekPRO's Setup and

select Bluetooth from the navigation bar at the left. (Setup > FiberChekPRO

Setup...). Your FiberChek probe will appear in the list of Available Devices.

Select it and click the "Connect" button.

Connecting

FiberCheck using

Bluetooth:

10 QUICK START GUIDE

Using the MP-60 Optical Power Meter with FiberChek

1. Connect an MP-60 Optical Power Meter to FiberChek via the Micro-USB

Interface.

2. Press the Action Button on the MP-60.

3. FiberChek is now in the Optical Power Meter View.

4. To return to FiberChek's Live Inspection View, disconnect the MP-60.

Using the MP-60 Optical Power Meter with FiberChek

1. Connect FiberChek to your computer or Android device via the Micro-USB

Interface and launch the FiberChekPRO software.

Connecting

FiberCheck using

USB:

Andere Handbücher für FiberChek

Inhaltsverzeichnis

Andere Viavi Mikroskop Handbücher

Viavi

Viavi P5000i Stücklistenhandbuch

Viavi

Viavi P5000i Stücklistenhandbuch

Viavi

Viavi FVAi-2030 Bedienungsanleitung

Viavi

Viavi OneAdvisor ONA-800 Stücklistenhandbuch

Viavi

Viavi FiberChek Stücklistenhandbuch

Viavi

Viavi P5000i Bedienungsanleitung

Viavi

Viavi P5000i Stücklistenhandbuch

Viavi

Viavi INX 760 Bedienungsanleitung

Viavi

Viavi FiberChek Bedienungsanleitung

Viavi

Viavi FVAm Series Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung

Leica

Leica FL560 Bedienungsanleitung