Vitek VT-2540 Bedienungsanleitung

Набор

для стрижки

VT-2589

Hair clipper set

VT-2540

ENGLISH

HAIR CLIPPER SET VT-2540

This set is intended for cutting hair and styling.

DESCRIPTION

1. Blades protective cover

2. Blade shifter

3. Body

4. Power switch «0/I»

5. 3 mm attachment comb

6. 6 mm attachment comb

7. 9 mm attachment comb

8. 12 mm attachment comb

9. Comb

10. Scissors

11. Lubricating oil

12. Cleaning brush

ATTENTION!

Do not use the unit near water in bathrooms, showers,

swimming pools etc.

• When using the unit in a bathroom, unplug it right after

usage by taking the power plug out of the mains socket,

as closeness of water is dangerous even if the unit is

switched off.

• For additional protection you can install a residual cur-

rent device (RCD) with nominal operation current not

exceeding 30 mA into the bathroom mains; contact a

specialist for installation.

SAFETY MEASURES

Read this instruction manual carefully before using the unit

and keep it for future reference for the whole unit operation

period. Use the unit for intended purposes only, as speci-

fied in this manual. Mishandling of the unit may lead to its

breakage and cause harm to the user or damage to his/

her property.

• The hair clipper is not intended for professional use.

• Before using the unit for the first time, make sure that

the voltage in your mains corresponds to unit operat-

ing voltage.

ENGLISH

• The power cord may not:

– touch hot objects and surfaces,

– be immersed into water,

– run over sharp edges of furniture,

– be used as a handle for carrying the unit.

• Use the unit to cut only natural human hair, hair should

be dry.

• Do not use the unit to cut artificial hair and animal hair.

• Use only the attachments supplied.

ATTENTION! Do not immerse the hair clipper, the power

cord and the plug into water or any other liquids. Do not

wash the clipper blades under water jet.

• Do not touch the hair clipper body and the power cord

with wet hands.

• Do not use the unit outdoors.

• Do not use the unit in places with high temperature and

relative humidity over 80%.

• Do not switch the unit on in places where aerosols are

sprayed or highly flammable liquids are used.

• Do not keep the unit near a bath or a sink filled with

water.

• If the unit is dropped into water, unplug it immediately,

and only then take it out of the water.

• Never use the unit if the attachment combs are broken

or damaged or if the blades are damaged.

• After each use clean the attachments and the blades

with the brush to remove the cut-off hair.

• Make sure that the blades are clean and that there is

lubricating oil on them.

• Never leave the operating unit unattended.

• Switch the hair clipper off during intervals in operation or

when you are not using it.

• Do not leave children unattended to avoid them using

the unit as a toy.

• Do not allow children to touch the hair clipper body and

the power cord during the unit operation.

• During the unit operation and breaks between opera-

tion cycles, place the unit out of reach of children and

disabled persons.

• This unit is not intended for usage by children.

ENGLISH

• The unit is not intended to be used by people with physi-

cal, sensory or mental disabilities (including children) or

by persons lacking experience or knowledge if they are

not under supervision of a person who is responsible for

their safety or if they are not instructed by this person on

the usage of the unit.

• Close supervision is necessary when children or dis-

abled persons are near the operating unit.

• For children safety reasons do not leave polyethylene

bags used as a packaging unattended.

Attention! Do not allow children to play with polyethylene

bags or packaging film. Danger of suffocation!

• If the power cord is damaged, it should be replaced

by the manufacturer, a maintenance service or similar

qualified personnel to avoid danger.

• Do not attempt to repair the unit. Do not disassemble the

unit by yourself, if any malfunction is detected or after it

was dropped, unplug the unit and apply to any autho-

rized service center at the contact addresses given in

the warranty certificate and on the website www.vitek.ru.

• Transport the unit in the original package only.

• Keep the unit out of reach of children and disabled

persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.

ITS COMMERCIAL USAGE AND USAGE IN PRODUCTION

AREAS AND WORK SPACES IS PROHIBITED.

BEFORE THE FIRST USE

In case of the unit transportation or storage at low

temperature keep it for at least three hours at room

temperature.

– Remove all promo-stickers and packaging elements

that can prevent the unit operation.

Blades

The blades are consumables and they are not covered by

the warranty.

The consumer should check the condition of the cut-

ting edges of the blades by themselves, as the sharp-

ENGLISH

ening (polishing) of cutting edges is not covered by

warranty.

– Lubricate the blades before and after every use of

the hair clipper with the oil (11) supplied with the unit.

Remove hair, dust and other foreign objects from the

blades before every use.

– If the blades have been removed for cleaning or replace-

ment, install them back, adjust and tighten the fastening

screws (pic. 1).

Blade shifter (2) (pic. 2)

– When you cut hair without using attachments (5, 6,

7, 8), you can shift the blade to adjust the cutting length.

– In the upper shifter (2) position, haircut will be the

shortest.

– In the lower shifter (2) position, the cutting length is

approximately the same as when using 3 mm attach-

ment comb (5).

– By changing the position of the shifter (2) while cutting

hair, you can select the necessary cutting length.

– If hair is jammed in the blades while cutting, move the

shifter (2) from the upper to the lower position or vice

versa several times, this will help to release the jammed

hair without removing the blades.

– When the hair clipper is switched on, move the shifter (2)

several times from the upper to the lower position or

vice versa, in this way you can remove the cut-off hair

from the blades.

– If the hair clipper pulls hair while cutting, it means

that the blades became blunt, replace them with

new ones.

Lubricating oil

– To maintain the unit in a good condition, you should

lubricate the blades periodically. Do not use vegetable

oil or oil that includes solvents. Solvents are subjected to

evaporation, and the remaining thick oil can slow down

the upper blade moving speed.

– For lubricating the blades use the oil (11) supplied with

the unit.

ENGLISH

HAIR STYLING INSTRUCTIONS

• Hair should be clean and dry during hair cutting.

• Insert the power plug into the mains socket.

• Before cutting hair switch the hair clipper on, mov-

ing the power switch (4) to the position «I» and make

sure that hair clipper operates normally and the blades

move smoothly. If there is excess oil on the blades,

switch the hair clipper off setting the power switch (4)

to the position «O» and remove the excessive oil with

a dry cloth.

• Constantly check the power cord, prevent it from mul-

tiple twisting, regularly switch the unit off and straighten

the power cord.

• Seat a person so that his/her head is approximately at

your eye level, cover the person’s shoulders with a towel

and set hair with the comb.

Reminder

– Cut off a small amount of hair at a time – if necessary

you can always return to the cut area of hair for addi-

tional cutting.

– The best haircutting results are reached on dry hair,

not wet.

– Comb the hair with a comb (9) to reveal uneven locks.

– It is better to leave longer hair after cutting for the

first time.

– After learning your clipper better, you will be able to

arrange your hair in any style you need.

Attachment combs

The cut-off hair length depends on the attachment comb:

– attachment comb (5): length of hair 3 mm

– attachment comb (6): length of hair 6 mm

– attachment comb (7): length of hair 9 mm

– attachment comb (8): length of hair 12 mm

Install the selected attachment comb on the blades, teeth

up, and press on the ledge in the bottom part of the attach-

ment until locking. Before cutting hair make sure that the

attachment is locked on its installation place. To remove

the attachment comb press the clamp and remove the

attachment.

ENGLISH

Step one

Set the 3 mm attachment comb (5) or 6 mm attachment comb

(6). Switch the unit on using the power switch (4), setting it

to position «I». Hold the hair clipper with the blades pointed

upwards. Start cutting from the beginning of the hair growth.

Slowly move the trimmer upwards. This way cut the head back

area at neck bottom and near the ears (pic. 3, 4, 5).

Step two

Switch the hair clipper off with the power switch (4) by

setting it to the position «O», unplug the unit, then set

the 9 mm attachment comb (7) for longer hair or 12 mm

attachment comb (8) and continue cutting hair near top of

the head (pic. 6).

Step 3 – cutting in the temples area

Switch the hair clipper off and unplug it, then set the 3 mm

attachment comb (5) or 6 mm attachment comb (6) and cut

hair in the area of temples. Then set the 9 mm attachment

comb (7) or 12 mm attachment comb (8) and continue cut-

ting towards the top of the head (pic. 5).

Step 4 – cutting the crown of the head

Using the 9 mm attachment comb (7) or 12 mm attachment

comb (8), cut the hair on the top of the head towards the

crown against the hair growth direction (pic. 6).

• You can cut hair against and along the direction of hair

growth, but keep in mind that the hair cut against the

growth will be shorter than the hair cut along the growth.

• Use the 3 mm attachment comb (5) and 6 mm attach-

ment comb (6) for very short haircut. To leave a little lon-

ger hair, use the 9 mm attachment comb (7) or 12 mm

attachment comb (8).

• To leave longer hair, grip hair locks between

your fingers and cut the hair off using the clipper (pic. 7).

• You can use the comb: lift the hair locks and cut them

with the hair clipper above the comb (9) (pic. 8).

• Always start cutting from the head back.

• Comb (9) the hair to reveal uneven locks.

• Use scissors (10) to trim hair.

ENGLISH

Step 5 – the final part

– In the final stage of hair cutting remove the attach-

ment comb from the unit, turn the blades of the clipper

towards the hair and trim hair on the temples and neck

carefully. Do not press the clipper strongly, there is dan-

ger of injuries or cuts when open blades come in contact

with skin (pic. 9).

Cone-shaped haircut

Set the necessary attachment comb and start cutting

from the head back towards the crown. Cut hair against

hair growth from the head front to the crown and from the

sides (pic. 10). To get a flat top haircut, use the comb: lift

the locks and cut them along the comb. Comb the hair to

reveal uneven locks.

After you finish cutting hair, switch the hair clipper off set-

ting the power switch (4) to the position «O» and take the

power plug out of the socket, put the protective cover (1)

on the blades.

CLEANING AND CARE

Lubricating the blades

Regularly lubricate the blades using the oil (11) supplied

with the unit.

– Switch the unit off using the power switch (4) and

unplug it.

– Apply one-two drops of oil (11) on the teeth of the blades

and the back side of the upper blade, switch the unit on

and make sure that the blades are moving smoothly.

– Switch the unit off, clean the excess oil with a dry cloth.

Attention! Use the oil (11) supplied with the unit.

DO NOT USE vegetable oil, fat, oil mixed with any solvents

for lubricating.

Solvents will evaporate, leaving thick grease that may slow

down the blades’ motion.

Cleaning the hair clipper

– Switch the hair clipper off and unplug it.

– Clean the blades from hair, using the cleaning

brush (12).

ENGLISH

– Wipe the accessories and the unit body (3) with a slightly

wet cloth, and then dry them with a soft cloth.

– Put the protective cover (1) on the blades.

– Do not immerse the unit into water or other liquids.

– Do not use solvents or abrasives for cleaning the hair

clipper body.

STORAGE

– Before taking the hair clipper away for storage clean and

lubricate the blades with lubricating oil (11) and put the

protective cover (1) on.

– Keep the hair clipper in a dry darkened and cool place

out of reach of children and disabled persons.

DELIVERY SET

Hair clipper (with blades) – 1 pc.

Attachment comb – 4 pc.

Protection lid – 1 pc.

Lubricating oil – 1 pc.

Cleaning brush – 1 pc.

Comb – 1 pc.

Scissors – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 230 V ~ 50 Hz

Rated input power: 7 W

ATTENTION! Do not use the unit near water in the bath-

rooms, showers, swimming pools etc.

RECYCLING

For environment protection do not throw out the unit and

the batteries (if included), do not discard the unit and the

Inhaltsverzeichnis

Sprachen:

Andere Vitek Elektrorasierer Handbücher

Vitek

Vitek VT-2548 BK Bedienungsanleitung

Vitek

Vitek VT-8278 Bedienungsanleitung

Vitek

Vitek VT-8280 Bedienungsanleitung

Vitek

Vitek VT-2519 Bedienungsanleitung

Vitek

Vitek VT-2565 Bedienungsanleitung

Vitek

Vitek VT-8267 BN Bedienungsanleitung

Vitek

Vitek VT-1356 Bedienungsanleitung

Vitek

Vitek VT-1359 Bedienungsanleitung

Vitek

Vitek VT-2564 Bedienungsanleitung

Vitek

Vitek VT-2553 BK Bedienungsanleitung

Vitek

Vitek VT-8265 B Bedienungsanleitung

Vitek

Vitek VT-8266 BK Bedienungsanleitung

Vitek

Vitek VT-2368 Bedienungsanleitung

Vitek

Vitek Boss VT-1377 BK Bedienungsanleitung

Vitek

Vitek VT-8270 Bedienungsanleitung

Vitek

Vitek VT-2512R Bedienungsanleitung

Vitek

Vitek VT-2549 BK Bedienungsanleitung

Vitek

Vitek VT-2546 Bedienungsanleitung

Vitek

Vitek Gentleman VT-1376 BK Bedienungsanleitung

Vitek

Vitek VT-2550 B Bedienungsanleitung

Vitek

Vitek VT-2547 Bedienungsanleitung

Vitek

Vitek VT-1371 Bedienungsanleitung

Vitek

Vitek VT-2560 Bedienungsanleitung

Vitek

Vitek Fast Sprint VT-1370 B Bedienungsanleitung

Beliebte Elektrorasierer Handbücher anderer Marken

Philips

Philips MicroAction 4402LC Bedienungsanleitung

Philips

Philips HQ7740 Bedienungsanleitung

Philips

Philips Norelco BG2022 Bodygroom Bedienungsanleitung

Norelco

Norelco Quadra 7610X Bedienungsanleitung

Philips

Philips 7616X Bedienungsanleitung

Philips

Philips HQ802 Bedienungsanleitung

Philips

Philips HQ7363/17 Bedienungsanleitung

Braun

Braun WaterFlex WF2s Bedienungsanleitung

Philips

Philips NORELCO S7371 Bedienungsanleitung

Daga

Daga MT-400 Handbuch

Remington

Remington BHT100 Bedienungsanleitung

Philips

Philips Bodygroom BG2000 Bedienungsanleitung

Kompernass

Kompernass KH 5537 Bedienungsanleitung

Remington

Remington BHT6100 Bedienungsanleitung

Philips

Philips qc5365 Bedienungsanleitung

MIA

MIA Aqua Body Bedienungsanleitung

Philips

Philips NORELCO AT880 Bedienungsanleitung

Matheo

Matheo MLR 15 Bedienungsanleitung