VS Sassoon SUPER BEARD XTP VSM7876A Montageanleitung

TOOL TIPS

for the precision beard & stubble trimmer.

VSM7876A

SUPER

BEARDXTP

HEY YOU!

TAKE A BOW FINE SIR.

THINGS ARE LOOKING UP

& YOU’VE JUST MADE A

QUALITY PURCHASE

WITH THIS NEW GROOMING TOOL.

WE KNOW YOU’VE GOT THIS, BUT BEFORE YOU JUMP INTO

USING YOUR NEW SIDE KICK, HERE’S A FEW TIPS & TRICKS

TO KNOW BEFORE LETTING YOUR CREATIVITY RUN LOOSE.

HIT UP VSFORMEN.COM.AU FOR MORE GROOMING & INSPIRATION.

SUPER BEARD XTP / TOOL TIPS

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety

instructions should always be followed, including the following:

Polythene bags over product or package may be dangerous. To avoid danger of

suffocation, keep this wrapper away from babies and children. This bag is not a toy.

DANGER: When the unit is used in a bathroom, unplug it after use since the proximity

of water presents a hazard even when the appliance is switched off

WARNING: Do not use or leave the AC power adaptor in a position where

it can become wet or there is a danger of it falling into a basin or other

vessels containing water. Keep the appliance dry, unless it is otherwise specified. Do

not use this appliance in or near bathtubs, showers, basins or other vessels containing

water.

- Do not immerse appliance in water or other liquids.

- Do not reach for an appliance that has fallen into water. Unplug immediately.

- Take care to avoid contact between the moving blades of the unit and the skin,

paying particular attention to the face, neck and hands.

- This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

SUPER BEARD XTP / TOOL TIPS

IMPORTANT: Always unplug the appliance when not in use or before cleaning.

Do not leave unattended when plugged in or switched on. Do not place on any

heat sensitive surface.

- Do not use any attachments other than those supplied by Conair Australia

Pty Ltd.

- Use this appliance only for its intended use as described within this

instruction booklet.

- Always unplug the appliance when fully charged.

- This appliance is not intended for commercial use.

- Never drop or insert any object into an opening.

- Do not use the appliance with damaged or broken attachment combs or with

any teeth missing from the blades, as injury may occur.

- Do not place on any surface while it is operating.

- Keep the cord away from heated surfaces

- Never twist or pull on the power cord.

- Do not use an extension cord with this appliance.

- After use do not wrap the cord around the appliance as in time this may cause

the cord to fracture. Coil cord loosely by the side of the appliance in storage.

- Do not use outdoors or operate where aerosol (spray) products are being

used or where oxygen is being administered.

- Do not use the appliance if it is damaged. In the event of damage, discontinue

use immediately and contact your dealer for instructions on returning it for

examination or exchange. If the supply cord is damaged, it must be replaced

by the manufacturer, its service agent or similarly qualified person in order

to avoid a hazard.

- Always ensure that the voltage to be used corresponds to the voltage marked

on the unit.

- For additional protection, the installation of a residual current device

(RCD) with a rated operating current not exceeding 30mA is advisable in

the electrical current circuit supplying the bathroom. Ask your installer for

advice.

SUPER BEARD XTP / TOOL TIPS

1. Cord/cordless use

2. Lithium-ion power

3. High performance

DC direct drive

motor

4. Precision W-Tech

blades

5. Ultra-flexing

contouring head

6. STUBBLE COMB

GUIDE - 0.4mm -

5.0mm trimming

lengths

7. BEARD COMB GUIDE

- 5.4mm - 10.0mm

trimming lengths

8. 0.4mm to 10mm

trimming settings

with ultra-precise

0.2mm motorised

adjustments at the

touch of a button

9. + up button –

increases the

trimming length

10. -down button –

decreases the

trimming length

11. On/Off switch

12. Smart memory

function

automatically

stores & returns to

the last selected

setting for

consistent trimming

13. LED display shows

cutting length

setting

14. 100% waterproof

15. Ergonomic design

with curved body

for easy control &

compete comfort

in use

16. Cleaning brush

17. Oil

18. Power adaptor

SUPER BEARD XTP

BRAVO. YOU’VE MADE A QUALITY PURCHASE.

The SUPER BEARD XTP is the precision beard & stubble

trimmer for perfect facial grooming.

SUPER BEARD XTP / TOOL TIPS

PREPPING YOUR

NEW TOOL

CHARGING

The SUPER BEARD XTP is so easy to use. But before you start using your new tool,

you must take the time to charge it for 3 hours before its first use.

Your new tool comes with a small amount of charge, but the initial charge will

ensure your new tool will have optimum power performance to give you smooth

fast cutting, every time.

- Before using for the first time, fully charge your new tool continuously for 3

hours. After the first charge a full charge will only take 90 minutes.

- Maximum battery capacity will only be reached after 3 charging &

discharging cycles.

- To charge the trimmer, first ensure your new tool is switched off, then insert

the small plug on the charging adaptor into the hole on the base of the

trimmer.

- Plug the charging adaptor into a suitable mains power socket and switch on.

- Always check that the charging indicator on the LED comes on when you have

switched the charging adaptor on.

- When the trimmer is charging the LED display lights up for a few seconds

and battery symbol indication will start to flash until the trimmer reaches

maximum capacity of 90 minutes.

- A full charge will take 90 minutes and will supply 80 minutes cordless

runtime.

- A quick charge of 5 minutes will supply 3 minutes cordless runtime,

sufficient for a single instant beard or stubble trim.

- To maintain optimum capacity of the rechargeable battery, it is highly

recommended to fully discharge & then recharge your tool for 3 hours every

3 months.

SUPER BEARD XTP / TOOL TIPS

NB - When the trimmer has less than 3 minutes charge left, the battery symbol

indication will start to flash. This indicates that the trimmer needs to be

recharged, however it may continue to run for a very short while after.

CORDED USE

To use the trimmer connected to mains power:

- Insert the small plug on the charging adaptor into the socket on the bottom

of your new tool.

- Plug the charging adaptor into a suitable mains power socket and switch on.

- Switch the trimmer on – NOTE – if the battery is weak and low on battery

charge, wait approx. 1min before switching the trimmer on.

SUPER BEARD XTP / TOOL TIPS

HOW TO USE

THE SUPER BEARD XTP

BEFORE USING

• Always inspect the trimmer blades for noticeable signs of damage.

• Always inspect the trimmer blades before use to ensure they are free from hair,

debris etc.

• Ensure the trimmer is sufficiently charged before use.

• For best performance use on clean, dry hair that has been combed until tangle-free.

• If possible, when using for the first time, try and grow your facial hair for a few

days before cutting so you can trim down to a level that is best for you.

SUPER BEARD XTP / TOOL TIPS

SELECTING A CUTTING LENGTH

The SUPER BEARD XTP comes with 2x comb guides with 48 precision trimming

lengths for crafting all types of beard & stubble.

The comb guides allow you to change the cutting length of your trimmer. You’ll

need to experiment to find your preferred length, but as a guide, 0.4mm will give

you very short stubble, whilst 4mm will give you a longer stubble look. 6mm+

will give you a short beard and 10mm will give you a longer bearded look.

• STUBBLE COMB GUIDE - 0.4mm - 5.0mm – this is the pre-attached comb

guide

• BEARD COMB GUIDE - 5.4mm - 10.0mm – this is the second comb guide that

attaches over the top of the stubble comb guide

• Depending on the length setting you desire, attach either the stubble or beard

comb guide and ensure that the comb guide/s are correctly positioned by

pushing the comb guide/s gently downwards to secure into place.

• Use the ‘‘+’’ or ‘‘-’’ buttons to adjust the comb guides to the required trimming

length.

• The trimming lengths are displayed on the LED screen in ‘‘mm’’ – scroll

through the available length settings with the digital touch controls. The

length settings on the LED screen will change as you adjust the ‘‘+’’ or ‘‘-’’

buttons

• There are 48 length settings available: 0.4mm - 5.0mm OR 5.4mm - 10.0mm

in 0.2mm increments.

GOOD TO NOTE: ALWAYS PUT THE COMB GUIDE ON

BEFORE TURNING THE TRIMMER ON, AND TURN THE

TRIMMER OFF BEFORE REMOVING IT.

Inhaltsverzeichnis

Andere VS Sassoon Elektrorasierer Handbücher

VS Sassoon

VS Sassoon VS7053A Bedienungsanleitung

VS Sassoon

VS Sassoon THE BEARD TRIM VSM7840A Montageanleitung

VS Sassoon

VS Sassoon VSM7472A Bedienungsanleitung

VS Sassoon

VS Sassoon Xpert Beard VSM7865A Montageanleitung

VS Sassoon

VS Sassoon THE BEARD BUDDY VSM703A Montageanleitung

VS Sassoon

VS Sassoon VSM2330A Montageanleitung

VS Sassoon

VS Sassoon VSM7318A Montageanleitung

VS Sassoon

VS Sassoon VS7863A Bedienungsanleitung

VS Sassoon

VS Sassoon VSM7052A Bedienungsanleitung

VS Sassoon

VS Sassoon VSM725A Bedienungsanleitung

VS Sassoon

VS Sassoon THE ESSENTIAL CUT Montageanleitung

VS Sassoon

VS Sassoon The All-Rounder VSM837A Montageanleitung

VS Sassoon

VS Sassoon Xpert Precision VSM50MA Bedienungsanleitung

VS Sassoon

VS Sassoon VSM7898A Bedienungsanleitung

VS Sassoon

VS Sassoon LITHIUM-PRO GROOM BUDDY VSM7420A Montageanleitung

VS Sassoon

VS Sassoon VS7050A Bedienungsanleitung

VS Sassoon

VS Sassoon The Rugged Commander Lithium All-In-One Bedienungsanleitung

VS Sassoon

VS Sassoon ELITE CLIP VSM6000A Montageanleitung

VS Sassoon

VS Sassoon Twin Trim VSM1A Montageanleitung

VS Sassoon

VS Sassoon THE GROOM CAPTAIN Montageanleitung

VS Sassoon

VS Sassoon VSM189RA Montageanleitung

VS Sassoon

VS Sassoon i-Twin Trim VSM155A Bedienungsanleitung

VS Sassoon

VS Sassoon PRO METAL Series Bedienungsanleitung

VS Sassoon

VS Sassoon Xpert Groom Bedienungsanleitung

Beliebte Elektrorasierer Handbücher anderer Marken

Philips

Philips MicroAction 4402LC Bedienungsanleitung

Philips

Philips HQ7740 Bedienungsanleitung

Philips

Philips Norelco BG2022 Bodygroom Bedienungsanleitung

Norelco

Norelco Quadra 7610X Bedienungsanleitung

Philips

Philips 7616X Bedienungsanleitung

Philips

Philips HQ802 Bedienungsanleitung

Philips

Philips HQ7363/17 Bedienungsanleitung

Braun

Braun WaterFlex WF2s Bedienungsanleitung

Philips

Philips NORELCO S7371 Bedienungsanleitung

Daga

Daga MT-400 Handbuch

Remington

Remington BHT100 Bedienungsanleitung

Philips

Philips Bodygroom BG2000 Bedienungsanleitung

Kompernass

Kompernass KH 5537 Bedienungsanleitung

Remington

Remington BHT6100 Bedienungsanleitung

Philips

Philips qc5365 Bedienungsanleitung

MIA

MIA Aqua Body Bedienungsanleitung

Philips

Philips NORELCO AT880 Bedienungsanleitung

Matheo

Matheo MLR 15 Bedienungsanleitung