Weider Pro 4100 Bedienungsanleitung

WELDERPR@4

Model No. 831.159820

Serial No.

Write the serial number in the

space above for reference.

Sedal Number Decal (under seat)

E_<IE_ R_ I S _

EQUIPMENT

[Olll Ill ROB _ I

HI_LPLI N E !

1-800-736-6879

USER'S MANUAL

SEARS, ROEBUCK AND CO.

HOFFMAN ESTATES, IL 60179

www.weiderfitness.com

new products, prizes,

fitness tips, and much morel

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS ............................................................. 3

BEFORE YOU BEGIN ................................................................... 4

ASSEMBLY ........................................................................... 5

ADJUSTMENTS ...................................................................... 21

WEIGHT RESISTANCE CHART ........................................................... 23

CABLE DIAGRAM ..................................................................... 24

EXERCISE GUIDELINES ................................................................ 26

ORDERING REPLACEMENT PARTS ................................................ Back Cover

FULL 90 DAY WARRANTY ....................................................... Back Cover

Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED DRAWING are attached in the center of

this manual. Remove the PART IDENTIFICATION CHART and the PART LIST/EXPLODED DRAWING before

beginning assembly.

IMPORTANT PRECAUTIONS

BEFORE YOU BEGIN

Thank you for selecting the versatile WELDER•PRO

4100 weight system. The PRO 4100 weight system

offers a selection of weight stations designed to devel-

op every major muscle group of the body. Whether

your goal is to tone your body, build dramatic muscle

size and strength, or improve your cardiovascular sys-

tem, the weight system will help you to achieve the

results you want.

For your benefit, read this manual carefully before

using the weight system. If you have additional

questions, please call our toll-free HELPLINE at

1-800-736-6879, Monday through Saturday, 7a.m.

until 7 p.m. Central lime (excluding holidays). To help

us assist you, please note the product model number

and serial number before calling. The model number is

831.159820. The sadal number can be found on a

decal attached to the weight system (see the front

cover ofthis manual).

Before reading further, please review the drawing

below and familiadze yourself with the parts that are

labeled.

ASSEMBLED

DIMENSIONS:

Height: 77 in.

Width: 81 in,

Length: 59 in.

Butterfly

/Press Arm

Ab Pulley

Station

Backrest

Warning Decal 2

(One on each side

of the right updght.)

Left Side

I_atBar

gh Pulley Station

Decal 1

Backrest

Seat

Right Side Leg Press

Plate

Weight

Leg

__ Low Pulley

Station

Note: The terms "right side" and "left side" are determined I'el-

ative to a person facing away from the weight system; they do

not correspond to right and left in the pictures in the manual.

Foot Plate

ASSEMBLY

•As you assemble the weight system, make sure

all parts are odented as shown in the drawings.

Before beginning assembly, carefully read the

following information and instructions:

•Assembly requires two people.

• Place all parts in acleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• 13ghten all parts as you assemble them, unless

instructedto do otherwise.

•For help identifying small pads, use the PART

ID I CA ON C T.

An Allen wrench _) and the following

tools (not included) are required for assembly:

•two adjustable wrenches _:_

•one rubber mallet

•one standard screwdriver

•one Phillips screwdriver

•lubricant, such as grease or petroleum jelly,

and soapy water.

Assembly will be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

1. Before beginning assembly, be sure that you

have read and understand the information in

the box above.

Attach the Base Cap (28) to the Right Base (1)

with two #8 x 3/4" Screws (68).

Attach the Center Base (67) to the Right Base (1)

with two 5/16" x 2 3/4" Bolts (60), two 5116"

Washers (26), and two 5/16" Nylon Locknuts (71).

insert four 5/16" x 2 1/2" Carriage Bolts (57) up

intothe Right Base (1).

,Press two 2" Square Inner Caps (33) into the

ends ofthe Left Base (2). Attach the Rubber

Bumper (98) to the Left Base with a #8 x 3/4"

Screw (68).

Insert four 5/16" x 2 1/2" Carriage Bolts (57) up

into the Left Base (2).

Attach the Left Base (2) to the Right Base (1) and

Center Base (67) with three 5/16" x 2 3/4" Bolts

(60), three 5/16" Washers (26), and three 5/16"

Nylon Locknuts (71).

60 26

71 67

Attach the Base Plate (37) to the Left Base (2)

with a 3/8" x 5 1/2" Bolt (58) and a 3/8" Nylon

Locknut (70).

Attach the Left Upright (7) to the Left Base (2)

with the two indicated 5/16" x 2 1/2" Carriage

Bolts (57) and two 5/16" Nylon Locknuts (71).

Attach the Left Leg (36) to the Left Base (2) with

the two indicated 5/16" x 2 1/2" Carriage Bolts

(57) and two 5/16" Nylon Locknuts (71). Be sure

the large upper hole in the Left Leg is on the

side shown.

Do not tighten the 5/16" Nylon Locknuts (71)

yet.

Press a 2" x 2 1/2" Inner Cap (22) into the top of

the Right Leg (73).

Attach the Right Upright (6) to the Right Base (1)

with the two indicated 5/16" x 2 1/2" Carriage

Bolts (57) and two 5/16" Nylon Locknuts (71).

Attach the Right Leg (73) to the Right Base (1)

with the two indicated 5/16" x 21!2" Carriage

Bolts (57) and two 5/16" Nylon Lock,nuts (71).

Do not tighten the 5/16" Nylon Locknuts (71)

yet.

71 36

7°

Attach the Right Seat Frame (5) to the Right Leg

(73) with two 5/16" x 3 1/4" Bolts (59), two 5/16"

Washers (26), and two 5/16" Nylon Locknuts (71).

Attach the Right Seat Frame (5) to the Right

Upright (6) with two 5/16" x3 1/4" Bolts (59), two

5/16" Washers (26), and two 5/16" Nylon

Locknuts (71).

Do not tighten the 5116" Nylon Locknuts (71)

yet.

Press a 2" Square Inner Cap (33) into the end of

the Left Seat Frame (29)°

Attach the Left Seat Frame (29) to the Left Leg

(36) with two 5/16" x 21/2" Carriage Bolts (57)

and two 5/16" Nylon Locknuts (71).

Attach the Left Seat Frame (29) to the Left

Updght (7) with two 5/16" x 3 1/4" Bolts (59), two

5/16" Washers (26), and two 5/16" Nylon

Locknuts (71).

Do not tighten the 5/16" Nylon Locknuts (71)

yet.

Set two Weight Bumpers (83) over the indicated

holes in the Center Base (67). Insert the two

Weight Guides (20) into the holes. Attach the

Weight Guides to the Center Base with two 5/16"

x 2 3/4" Bolts (60), four 5/16" Washers (26), and

two 5/16" Nylon Locknuts (71).

.Slide the eight Weights (72) onto the Weight

Guides (20) with the pin grooves on the side

shown.

Press the Weight Tube Bumper (32) intothe bot-

tom of the Weight Tube (82). Insert the Weight

Tube into the center hole in the stack of Weights

(72). Be sure the Weight Tube is oriented as

shown.

Lubricate the indicated holes in the Top Weight

(74). Slide the Top Weight onto the Weight

Guides (20), with the pin groove on the bottom.

.Press two 2" x 2 112"inner Caps (22) into the

ends of the Left Top Frame (3).

Attach the LeftTop Frame (3) to the Left Upright

(7) with two 5/16" x31/4" Bolts (59), a Support

Plate (21), and two 5/16" Nylon Looknuts (71). Do

not tighten the Locknuts yet.

10. Press a 2" x21/2" Inner Cap (22) into the end of

the Right Top Frame (8).

Attach the Right Top Frame (8) to the Right

Upright (6) with two 5/16" x 3 1/4" Bolts (59), a

Support Plate (21), and two 5/16" Nylon Locknuts

(71).

Attach the Right Top Frame (8) to the Left Top

Frame (3) with two 5/16" x 2 3/4" Bolts (60), two

5/16" Washers (26), and two 5/16" Nylon

Looknuts (71).

Do not tighten the 5/16" Nylon Locknuts (71)

yet.

22 8

L L

Lubricate

16 _71

_7 60

11. Press the two Weight Guide Bushings (44) into

the Center Top Frame (14), Slide the Center Top

Frame onto the Weight Guides (20).

Attach the Center Top Frame (14) to the Right

Top Frame (8) with two 5116"x2 3/4" Bolts (60),

two 5/16" Washers (26), and two 5/16" Nylon

Locknuts (71).

Attach the Center Top Frame (14) to the Left Top

Frame (3) with two 5/16" x 23/4" Bolts (60), two

5/16" Washers (26), and two 5/16" Nylon

Locknuts (71).

Tighten all of the 5/16" Nylon Locknuts (71)

used In steps 3-11.

Note: The remaining hardware from the

"Frame Assembly" bag will be used later.

12. Press a 11/2" Square Inner Cap (41) into the

Right Updght (6). Press a 2" x 2 1/2" Inner Cap

(22) intothe Butterfly Frame (9).

Lubricate a3/8" x 3" Bolt(61) with grease, Attach

the Butterfly Frame (9) to the Right Top Frame (8)

with the Boit and a 3/8" Nylon Locknut (70). Do

not overUghten the Locknut; the Butterfly

Frame must be able to pivot easily.

13. Lubricate a 3/8" x2" Bolt(62) with grease. Attach

the Pivot Bracket (48) to the Right Buttedly Arm

(11) with the Bolt and a 3/8" Nylon Jamnut (50).

Do not overtighten the Locknut; the Pivot

Bracket must be able to pivot easily.

Press a I 1/2" x 2" Inner Cap (23) into the indicat-

ed end of the Right Butterfly Arm (11). Wet the

bottom end of the Arm with soapy water. Slide a

Large Foam Pad (19) onto the Arm.

Slide a Foam Gdp (76) onto a Press Handle (12).

Press a 1" Round Inner Cap (24) into the end of

the Handle. Attach the Handle to the Right

Butterfly Arm (11) with two 5/16" x 5/8" Button

Head Bolts (64).

Slide the Large Foam Pad (19) down so that the

bottom of the Foam Pad is even with the bottom

of the Right ButterflyArm (11).

Repeat this step with the Left Butterfly Arm

(10),

71 71

11 5o

14. Lubricate a 3/8"x 3" Button Head Bolt (97) and

both sides of two Plastic Washers (55) with

grease. Attach the Right Butterfly Arm (11) to the

Butterfly Frame (9) with the Bolt, the two Plastic

Washers, two Butterfly Caps (54), two 3/8" wash-

ers (75), and a 3/8" Nylon Jamnut (50). Do not

overt|ghten the Locknut; the Butterfly Arm

must be able to pivot easily. Be sure the

indented sides of the Plastic Washers fit over

the welded bushing In the Butterfly Arm.

Repeat this step with the Left Butterfly Arm

(10).

15. Attach the Bumper (25) to the Right Leg (73) with

the #10 x 1" Screw (77).

Press two 11/2" x 2" Inner Caps (23) intothe

ends of the Leg Lever (4).

Lubricate a 3/8" x 21/2" Bolt (63) with grease.

Attach the Leg Lever (4) to the Right Leg (73)

with the Bolt and a 3/8" Nylon Jamnut (50). Do

not overtighten the Jamnut; the Leg Lever

must be able to pivot easily.

16. Press a 2" x 2112" Inner Cap (22) into the top of

the Leg Press Frame (30).

Lubricate a3/8" x 3" Bolt (61) with grease. Attach

the Leg Press Frame (30) to the Left Base (2)

with the Bolt and a 3/8" Nylon Locknut (70). Do

not overtighten the Locknut; the Leg Press

Frame must be able to pivot easily.

Welded Lubricate _7

Lubricate

520!i "'_61 "°"

23/_

Lubricate

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Weider Fitnessgeräte Handbücher

Weider

Weider Pro 5000 Bedienungsanleitung

Weider

Weider WEBE12621 Bedienungsanleitung

Weider

Weider Pro 205 Bedienungsanleitung

Weider

Weider MAX XP400 Bedienungsanleitung

Weider

Weider Pro 120 WEEVBE70200 Bedienungsanleitung

Weider

Weider XR20 Bedienungsanleitung

Weider

Weider 245 Bedienungsanleitung

Weider

Weider Stepmaster Sm9 Bedienungsanleitung

Weider

Weider WEBE36790 Bedienungsanleitung

Weider

Weider Pro 6900 Bedienungsanleitung

Weider

Weider Ultra Max 14 In 1 Bedienungsanleitung

Weider

Weider 2990 I Benutzerhandbuch

Weider

Weider 132 Training Bedienungsanleitung

Weider

Weider Sa 1-22 Standard Bench Bedienungsanleitung

Weider

Weider 2100 Bedienungsanleitung

Weider

Weider B-220 Bedienungsanleitung

Weider

Weider X42 Bedienungsanleitung

Weider

Weider 130 Bench Bedienungsanleitung

Weider

Weider WEBE11920 Bedienungsanleitung

Weider

Weider CROSS BOW Bedienungsanleitung

Weider

Weider Viper 2000 Bedienungsanleitung

Weider

Weider 1045 Bedienungsanleitung

Weider

Weider ZONE TONER Bedienungsanleitung

Weider

Weider 255 L Bedienungsanleitung

Beliebte Fitnessgeräte Handbücher anderer Marken

NSD

NSD PB-188P Bedienungsanleitung

Performance

Performance HyperVibe Bedienungsanleitung

Scalamobil

Scalamobil S27 Bedienungsanleitung

Precor

Precor Experience Series Bedienungsanleitung

FYTTER

FYTTER RedMIUM BENCH BE-T6R Bedienungsanleitung

Taurus

Taurus TF-RK1312 Bedienungsanleitung

Nustep

Nustep T5 Bedienungsanleitung

Precor

Precor CW-507 Bedienungsanleitung

Movement

Movement BICEPS Idea Bedienungsanleitung

Kegel8

Kegel8 V For Men Bedienungsanleitung

BLK BOX

BLK BOX 21-0122-0B Bedienungsanleitung

Stamina

Stamina aeropilates premier 299 Bedienungsanleitung

SPORTSTECH

SPORTSTECH PBX300 Bedienungsanleitung

ParaBody

ParaBody Serious Steel 877102 Bedienungsanleitung

Weslo

Weslo Gym 650 Bedienungsanleitung

Rebel

Rebel ACTIVE RBA-1011 Bedienungsanleitung

4iiii

4iiii FLiiiight Bedienungsanleitung

Image

Image 540 Bedienungsanleitung