Weider 350 Bench Bedienungsanleitung
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Model No. WEBE1915.0
Serial No.
Write the serial number in the
space above for reference.
Serial Number Decal (under seat)
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
USER’S MANUAL
QUESTIONS?
As a manufacturer, we are commit-
ted to providing complete customer
satisfaction. If you have questions,
or if parts are missing, PLEASE DO
NOT CONTACT THE STORE;
please contact Customer Care.
IMPORTANT: You must note the
product model number and
serial number (see the drawing
above) before contacting us:
CALL TOLL-FREE:
1-877-992-5999
Mon.–Fri., 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
www.weiderservice.com
2
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
CABLE DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
TABLE OF CONTENTS
WEIDER is a registered trademark of ICON IP, Inc.
WARNING DECAL PLACEMENT
The decals shown here have been
applied in the locations shown. If a decal
is missing or illegible, call the tele-
phone number on the front cover of
this manual and request a free
replacement decal. Apply the decal in
the location shown. Note: The decals
may not be shown at actual size.
3
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over the age of 35 or per-
sons with pre-existing health problems.
2. It is the responsibility of the owner to ensure
that all users of the weight bench are ade-
quately informed of all precautions.
3. The weight bench is intended for home use
only. Do not use the weight bench in any
commercial, rental, or institutional setting.
4. Keep the weight bench indoors, away from
moisture and dust. Place the weight bench on
a level surface, with a mat beneath it to pro-
tect the floor or carpet. Make sure that there
is enough clearance around the weight bench
to mount, dismount, and use it.
5. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
6. Keep children under age 12 and pets away
from the weight bench at all times.
7. Keep hands and feet away from moving parts.
8. Always wear athletic shoes for foot protec-
tion while exercising.
9. The weight bench is designed to support a
maximum weight of 610 lbs. (277 kg), includ-
ing a maximum user weight of 300 lbs. (136
kg). Do not use more than 310 lbs. (141 kg) of
weight (not included) with the weight bench.
10. Always make sure that the adjustment pin is
fully inserted into the bench frame and the
backrest bracket before you exercise.
11. Always place an equal amount of weight on
both sides of the weight carriage or barbell.
12. Always secure weights with the weight clips
when they are mounted on the weight car-
riage, the barbell, or the weight tube on the
leg lever.
13. Always lower the weight carriage in a con-
trolled manner; never let the weight carriage
drop.
14. Always remove the lat bar when performing
an exercise that does not require the lat bar.
15. Always move the bench out of the way when
performing an exercise that does not require
the bench.
16. If you feel pain or dizziness at any time while
exercising, stop immediately and cool down.
17. Use the weight bench only as described in
this manual.
WARNING: To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on the weight bench before using the weight bench.
ICON assumes no responsibility for personal injury or property damage sustained by or through the
use of the weight bench.
IMPORTANT PRECAUTIONS
4
Rack Backrest
Rear Upright
Weight Guide
High Pulley Station
Lat Bar
Lat Tower
Upright
Curl Pad
Leg Lever
Weight Carriage
Seat
Backrest
Bracket
Adjustment
Pin
Bench
Backrest
Butterfly Arm
BEFORE YOU BEGIN
Thank you for selecting the versatile WEIDER®350
weight bench. The WEIDER 350 weight bench is
designed to help develop every major muscle group of
the body. Whether your goal is to tone your body, build
dramatic muscle size and strength, or improve your
cardiovascular system, the weight bench will help you
to achieve the specific results you want.
For your benefit, read this manual carefully before
using the weight bench. If you have questions after
reading this manual, please see the front cover of this
manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
To avoid a registration fee for any service needed
under warranty, you must register the weight bench
at www.weiderservice.com/registration.
Before reading further, please review the drawing below
and familiarize yourself with the parts that are labeled.
ASSEMBLED DIMENSIONS:
Height: 61 in. (155 cm)
Width: 50 in. (127 cm)
Depth: 76 in. (193 cm)
Right Side
Left Side
Note: The terms “right side” and “left side”
are determined relative to a person sitting on
the bench; they do not correspond to right
and left on the drawings in the manual.
Barbell Guide
Barbell
Safety Spotter
Weight Tube
M6 Washer (96)
M10 Nylon Locknut (80)
M10 Washer (83)
M4 x 13mm
Self-tapping
Screw (94)
M8 Washer (84)
M8 Nylon
Locknut (81)
M6 x 16mm
Screw (95)
M8 x 70mm Bolt (93)
M8 x 65mm Bolt (79)
M10 x 62mm Carriage Bolt (97)
M8 x 60mm Bolt (91)
M6 x 40mm Screw (100)
M8 x 18mm
Bolt (90)
M8 x 10mm
Set Screw (99)
M10 x 183mm Bolt (98)
M10 x 75mm Bolt (39)
M10 x 68mm Bolt (85)
M10 x 62mm Bolt (88)
M10 x 48mm Bolt (92)
M10 x 20mm
Bolt (89)
M8 x 22mm
Shoulder Bolt (101)
M10 x 25mm
Bolt (86)
M6 x 63mm Screw (87)
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts
may have been preattached. If a part is not in the parts bag, check to see if it has been preattached.
5
6
ASSEMBLY
1.
Orient the Bench Rear Stabilizer (2) so that the
warning decal is in the position shown. Attach
the Bench Rear Stabilizer to the Bench Frame
(1) with two M10 x 62mm Carriage Bolts (97)
and two M10 Nylon Locknuts (80). Do not
tighten the Nylon Locknuts yet.
2. Attach the Front Leg (3) to the Bench Front
Stabilizer (5) with two M10 x 68mm Bolts (85),
four M10 Washers (83), and two M10 Nylon
Locknuts (80). Do not tighten the Nylon
Locknuts yet.
Attach the Front Leg (3) to the Bench Frame (1)
with two M10 x 68mm Bolts (85), four M10
Washers (83), and two M10 Nylon Locknuts
(80). Do not tighten the Nylon Locknuts yet.
1
2
Before beginning assembly, make sure
you understand the information in the
box above.
80
1
2
97
Warning
Decal
3
80
5
85
85
83
83
83
83
83
83
80
1
Before beginning assembly, carefully read the fol-
lowing information and instructions:
• To hire an authorized service technician to
assemble the weight bench, call 1-800-445-2480.
• Assembly requires two persons.
• Because of its size, the weight bench should be
assembled in the location where it will be used.
Make sure that there is enough clearance to walk
around the weight bench as you assemble it.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Assembly requires the included hex key(s)
and the following tools (not included):
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Assembly Easier
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone. By setting aside
plenty of time, assembly will go smoothly.
7
3. Attach the Olympic Adapter (22) to the Weight
Tube (6) with an M8 x 10mm Set Screw (99).
Attach the Weight Tube (6) inside the Leg Lever
(4) with an M8 x 60mm Bolt (91), two M8
Washers (84), a 13mm x 13mm Spacer (78),
and an M8 Nylon Locknut (81). Next, press the
25mm Round Angled Cap (19) onto the Weight
Tube; make sure the widest part of the
Round Angled Cap is at the bottom.
Apply grease to an M10 x 68mm Bolt (85).
Attach the Leg Lever (4) to the Front Leg (3)
with the Bolt and an M10 Nylon Locknut (80).
Do not overtighten the Nylon Locknut; the
Leg Lever must pivot easily.
4. Orient the two Backrest Frames (9) so the indi-
cated holes are closer to the bottom. Attach the
Backrest Frames to the Backrest Bracket (7)
with four M10 x 48mm Bolts (92), four M10
Washers (83), and four M10 Nylon Locknuts
(80). Do not tighten the Nylon Locknuts yet.
5. Attach the Bench Backrest (11) to the Backrest
Frames (9) with four M6 x 40mm Screws (100)
and four M6 Washers (96). Do not tighten the
Screws yet.
85
80 3
Grease
6
19
78
81
22
99
84 84
91
4
3
4
Holes
9
80
7
83
92
92
83
83
80
5
96
96
11
96
100
100
9
8
6. Insert the Backrest Bracket (7) through the indi-
cated hole in the Bench Frame (1).
Apply grease to an M10 x 183mm Bolt (98).
Attach the Backrest Frames (9) to the Bench
Frame (1) with the Bolt, two M10 Washers (83),
and an M10 Nylon Locknut (80). Do not over-
tighten the Nylon Locknut; the Backrest
Frames must pivot easily.
Attach the Adjustment Pin (20) to the Bench
Frame (1) with an M4 x 13mm Self-tapping
Screw (94). Insert the Adjustment Pin into the
Bench Frame and the Backrest Bracket (7).
Tighten the M6 x 40mm Screws (100) used
in step 5.
8. Insert a Pad Tube (10) into the Front Leg (3).
Slide two Short Foam Pads (23) onto the Pad
Tube.
Assemble the other two Pad Tubes (10) to the
Leg Lever (4) in the same manner.
9. Attach the Curl Pad (13) to the Curl Post (8)
with two M6 x 16mm Screws (95).
7. Attach the Seat (12) to the Bench Frame (1)
with four M6 x 16mm Screws (95).
See steps 1–6. Tighten the M10 Nylon
Locknuts (80) used in these steps.
20
94
Grease
Hole
1
9
6
7
98
80
7
83
12
95
95
1
3
4
10
10
10
23
23
8
9
8
13
95
83
9
10. Orient the Center Base (24) so that the indented
holes are downward. Insert two M10 x 62mm
Carriage Bolts (97) up through the Center Base.
Locate the Side Base (51) that has a warning
decal. Orient the Side Base as shown and
attach it to the Center Base (24) with two M10 x
68mm Bolts (85), two M10 Washers (83), and
two M10 Nylon Locknuts (80). Do not tighten
the Nylon Locknuts yet.
Attach the other Side Base (51) in the same
way.
12. Attach the Butterfly Frame (32) to the Center
Upright (26) with two M10 x 68mm bolts (85),
the Plate (41), and two M10 Nylon Locknuts
(80).
11. Attach the Center Upright (26) to the Center
Base (24) with two M10 x 62mm Carriage Bolts
(97) and two M10 Nylon Locknuts (80). Do not
tighten the Nylon Locknuts yet.
Attach the Foot Plate (46), the Center Upright
(26), and the Rear Base (25) to the Center
Base (24) with two M10 x 75mm Bolts (39) and
two M10 Nylon Locknuts (80). Do not tighten
the Nylon Locknuts yet.
Attach the Foot Plate (46) to the Center Upright
(26) with an M10 x 68mm Bolt (85), an M10
Washer (83), and an M10 Nylon Locknut (80).
24
85
85
51
10
11
80
83
83
26
39
25
85
24
80
80
80
97
97
12
83
80
80
26
46
32
85
41
Indented
Holes
Warning
Decal
10
13. Insert an M10 x 20mm Bolt (89) into the Weight
Carriage (35). Orient the Weight Carriage and
the Rear Upright (27) as shown. Slide the
Weight Carriage onto the Upright.
Orient the Weight Carriage Stop (48) so the
60mm Bushing (54) is at the top. Slide the
Weight Carriage Stop onto the Rear Upright
(27) and secure it with an M8 x 70mm Bolt (93)
and an M8 Nylon Locknut (81).
14. Attach the Rear Upright (27) to the Rear Base
(25) with two M10 x 68mm Bolts (85), four M10
Washers (83), and two M10 Nylon Locknuts
(80). Do not tighten the Nylon Locknuts yet.
15. Attach a Guide Rod (28) to the right Side Base
(51) with an M8 x 65mm Bolt (79), two M8
Washers (84), two 13mm x 13mm Spacers
(78), and an M8 Nylon Locknut (81). Do not
tighten the Nylon Locknut.
Repeat this step with the left Side Base (51).
27
Tall
Side
13
93
35
89
48 54
81
25
27
83
83
80
85
14
15
28
81
84
51
78
78
84
79
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Weider Heim-Fitnessstudio Handbücher
Weider
Weider 8515 Bedienungsanleitung
Weider
Weider Pro 330 Bench Benutzerhandbuch
Weider
Weider 214 Bench Bedienungsanleitung
Weider
Weider Pro 125 Bench Kurzanleitung
Weider
Weider 9940 Bedienungsanleitung
Weider
Weider WEEVSY2996.1 Bedienungsanleitung
Weider
Weider WEBE0635.1 Bedienungsanleitung
Weider
Weider D700 ACHIEVER Bedienungsanleitung
Weider
Weider Pro 290 W 30664.0 Bedienungsanleitung
Weider
Weider 831.159833 Bedienungsanleitung
Weider
Weider 214 Bench Kurzanleitung
Weider
Weider Gold MEDALLION M4744 Bedienungsanleitung
Weider
Weider PRO 125 Bedienungsanleitung
Weider
Weider 244 Bench Kurzanleitung
Weider
Weider 355 Bedienungsanleitung
Weider
Weider 831.150721 Bedienungsanleitung
Weider
Weider Flex 8960 Kurzanleitung
Weider
Weider 325 Bench Benutzerhandbuch
Weider
Weider PLATINUM 831.153970 Bedienungsanleitung
Weider
Weider D630S 354.156340 Bedienungsanleitung
Beliebte Heim-Fitnessstudio Handbücher anderer Marken
Horizon Fitness
Horizon Fitness OXFORD 6 Bedienungsanleitung
Energetics
Energetics Multi Trainer 5.1 Bedienungsanleitung
Matrix
Matrix MG-PL Series Bedienungsanleitung
Reebok
Reebok Tbr2i Bedienungs- und Wartungshandbuch
Pure Fitness
Pure Fitness 8526HE Bedienungsanleitung
Bowflex
Bowflex Sport 001-6961 Bedienungsanleitung
