Weslo Compact XS WETL20708.0 Bedienungsanleitung

USER'S MANUAL

Model No. WETL20708.0

Serial No.

Write the serial number in the space

above for reference.

QUEST ONS?

As a manufacturer, we are commit-

ted to providing complete customer

satisfaction. If you have questions,

or if there are missing parts, please

dresses listed below:

Call: 08457 089 009

Outside UK: 0 (44) 113 3877133

Fax: 0 (44) 113 3877125

E-mail: [email protected]

Write:

CON Health & Fitness, Ltd.

Unit 4

Revie Road ndustrial Estate

Revie Road, Beeston

Leeds, LS11 8JG

CAUT ON

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Serial Number

Decal

TABLE OF CONTENTS

WARNINGDECALPLACEMENT ..............................................................2

IMPORTANTPRECAUTIONS .................................................................3

BEFOREYOUBEGIN .......................................................................5

ASSEMBLY ...............................................................................6

OPERATIONANDADJUSTMENT ............................................................11

HOWTOFOLDANDMOVETHETREADMILL ..................................................15

TROUBLESHOOTING ......................................................................17

EXERCISEGUIDELINES ...................................................................19

PARTLIST ...............................................................................20

EXPLODEDDRAWING .....................................................................21

ORDERINGREPLACEMENTPARTS ..................................................BackCover

RECYCLINGINFORMATION .........................................................BackCover

WARN NG DECAL PLACEMENT

This drawing shows the locations of the warning

decals. f a decal is missing or illegible, call

the telephone number on the front cover of

this manual and request a free replacement

decal. Apply the decal in the location shown.

Note: The decals may not be shown at actual

size.

WESLO is a registered trademark of ICON IP, Inc.

1. Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over age 35 or

persons with pre-existing health problems.

2. t is the responsibility of the owner to ensure

that all users of this treadmill are adequately

informed of all warnings and precautions.

3. Use the treadmill only as described in this

manual.

4. Place the treadmill on a level surface, with at

least 8 ft. (2.4 m) of clearance behind it and

2 ft. (0.6 m) on each side. Do not place the

treadmill on a surface that blocks any air

openings. To protect the floor or carpet from

damage, place a mat under the treadmill.

5. Keep the treadmill indoors, away from mois-

ture and dust. Do not put the treadmill in a

garage or covered patio, or near water.

6. Do not operate the treadmill where aerosol

products are used or where oxygen is being

administered.

7. Keep children under age 12 and pets away

from the treadmill at all times.

8. The treadmill should be used only by per-

sons weighing 265 lbs. (120 kg) or less.

9. Never allow more than one person on the

treadmill at a time.

10. Wear appropriate exercise clothes while

using the treadmill. Do not wear loose

clothes that could become caught in the

treadmill. Athletic support clothes are recom-

mended for both men and women.

Always

wear athletic shoes; never use the treadmill

with bare feet, wearing only stockings, or in

sandals.

11. When connecting the power cord (see page

11), plug the power cord into an earthed cir-

cuit. No other appliance should be on the

same circuit. When replacing the fuse, an

ASTA approved BS1362 type should be fitted

to the fuse carrier. A 13 amp fuse should be

used.

12. f an extension cord is needed, use only a 3-

conductor, 14-gauge (1 mm2) cord that is no

longer than 5 ft. (1.5 m).

13. Keep the power cord away from heated sur-

faces.

14. Never move the walking belt while the power

is turned off. Do not operate the treadmill if

the power cord or plug is damaged, or if the

treadmill is not working properly. (See TROU-

BLESHOOT NG on page 17 if the treadmill is

not working properly.)

15. Read, understand, and test the emergency

stop procedure before using the treadmill

(see page 12).

16. Never start the treadmill while you are stand-

ing on the walking belt. Always hold the

handrails while using the treadmill.

17. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

18. Never leave the treadmill unattended while it

is running. Always remove the key, unplug

the power cord, and switch the reset/off cir-

cuit breaker to the off position when the

treadmill is not in use. (See the drawing on

page 5 for the location of the reset/off circuit

breaker.)

19. The pulse sensor is not a medical device.

Various factors, including your movement,

may affect the accuracy of heart rate readings.

The pulse sensor is intended only as an exer-

cise aid in determining heart rate trends in

general.

MPORTANT PRECAUT ONS

WARN NG: To reduce the risk of serious injury, read all important precautions and in-

structions in this manual and all warnings on your treadmill before using your treadmill. CON as-

sumes no responsibility for personal injury or property damage sustained by or through the use of

this product.

20. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See

ASSEMBLY on page 6, and HOW TO FOLD

AND MOVE THE TREADM LL on page 15.)

You must be able to safely lift 45 lbs. (20 kg)

to raise, lower, or move the treadmill.

21. When folding or moving the treadmill, make

sure that the storage latch is holding the

frame securely in the storage position.

22. Do not change the incline of the treadmill by

placing objects under the treadmill.

23. nspect and properly tighten all parts of the

treadmill regularly.

24. Never drop or insert any object into any

opening on the treadmill.

25. DANGER: Always unplug the power

cord immediately after use, before cleaning

the treadmill, and before performing the

maintenance and adjustment procedures de-

scribed in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

26. This treadmill is intended for in-home use

only. Do not use this treadmill in any com-

mercial, rental, or institutional setting.

SAVE THESE NSTRUCT ONS

Thank you for selecting the new WESLO®COMPACT

XS treadmill. The COMPACT XS treadmill offers a se-

lection of features designed to make your workouts at

home more effective. And when youʼre not exercising,

the unique treadmill can be folded up, requiring less

than half the floor space of other treadmills.

For your benefit, read this manual carefully before

using the treadmill. If you have questions after read-

ing this manual, please see the front cover of this man-

ual. To help us assist you, note the product model

number and serial number before contacting us. The

model number and the location of the serial number

decal are shown on the front cover of this manual.

Before reading further, please review the drawing

below and familiarize yourself with the labeled parts.

BEFORE YOU BEG N

Handrail

Console

ey/Clip

Reset/Off

Circuit Breaker

Walking Belt

Motor Hood

Latch nob

Foot Rail

Idler Roller

Adjustment Bolts

Leveling Feet

Incline Leg

M8 Star

Washer (5)–6

1/4" Star

Washer (4)–2

M4.2 x 12mm

Screw (3)–4 M6 x 10mm

Bolt (2)–2 M8 x 16mm

Bolt (1)–6

M4.2 x 12mm

Hood Screw (30)–1

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to

the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant

on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys and your own Phillips screwdriver ,

adjustable wrench , and wire cutters .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is

the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses

is the quantity needed for assembly. Note: f a part is not in the hardware kit, check to see if it is preattached

to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem-

bly. Extra hardware may be included.

1. Identify the Right Handrail (86), which is marked

with a sticker. Have a second person hold the

Right Handrail near the tube on the Base (79).

See the inset drawing. Tie the wire tie in the

Right Handrail securely around the end of the

Wire Harness (84). Then, pull the other end of

the wire tie until the Wire Harness is routed

completely through the Right Handrail.

Gently pull on the Wire Harness (84) while slid-

ing the Right Handrail (86) down into the tube

on the Base (79). Make sure not to pinch the

Wire Harness.

Attach the Right Handrail (86) to the Base (79)

with two M8 x 16mm Bolts (1) and two M8 Star

Washers (5); do not fully tighten the Bolts

yet. Be careful not to pinch the Wire Harness

(84).

Attach the Left Handrail (34) to the Base (79)

with two M8 x 16mm Bolts (1) and two M8 Star

Washers (5); do not fully tighten the Bolts

yet.

Remove the wire tie from the Wire Harness (84).

2. Orient the Handrail Crossbar (83) as shown.

See the inset drawing in step 1. Tie the wire tie

in the Handrail Crossbar securely around the

end of the Wire Harness (84). Then, pull the

other end of the wire tie until the Wire Harness

is routed completely through the Handrail

Crossbar.

Gently pull on the Wire Harness (84) while in-

serting the Handrail Crossbar (83) down into the

Handrails (34, 86). Make sure not to pinch the

Wire Harness.

Attach the Handrail Crossbar (83) with two M6 x

10mm Bolts (2) and two 1/4" Star Washers (4);

do not fully tighten the Bolts yet. You may

need to push the Foam Grips (85) down slightly.

Wire Tie

Wire

Tie 51

Wire Tie

Hole

4. Remove the console back and the four M4.2 x

12mm Screws (3) from the Console (80). Save

the console back and the Screws for step 6.

Hold the Console (80) near the Console Plate

(81). Touch the Console Plate to discharge

any static.

Next, press the connector on the end of the

Wire Harness (84) into the connector on the

back of the Console (80) in the location shown.

See the inset drawing. The connectors

should slide together easily and snap into

place. If they do not, turn the connector on the

Wire Harness and try again. F THE CONNEC-

TORS ARE NOT CONNECTED PROPERLY,

THE CONSOLE MAY BE DAMAGED WHEN

THE POWER S TURNED ON.

Connector

84 81

Connectors

3. Attach the Console Plate (81) to the Handrail

Crossbar (83) with two M8 x 16mm Bolts (1) and

two M8 Star Washers (5). Make sure the

Console Plate is oriented as shown and that

the Wire Harness (84) is not pinched.

Remove the wire tie from the Wire Harness (84).

83 81

Wire Tie

Console

Back

6. Attach the console back to the Console (80) with

the four M4.2 x 12mm Screws (3) that you re-

moved in step 4.

See step 1. Tighten the two M8 x 16mm Bolts

(1) on each side of the treadmill.

See step 2. Tighten the M6 x 10mm Bolt (2) on

each side of the treadmill.

Console Back

5. Set the Console (80) on the Console Plate (81),

and insert the excess wire into the Handrail

Crossbar (83). Make sure that no wires are

pinched.

Attach the Console (80) with four M4.2 x 12mm

Screws (3); start all four Screws before tight-

ening any of them.

7. Tighten a M4.2 x 12mm Hood Screw (30) into

the Motor Hood (53). 7

10. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear

plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the tread-

mill. Note: Extra hardware may be included. eep the included hex keys in a secure place; one of the hex

keys is used to adjust the walking belt (see page 18).

9. Position the cylinder end of the Gas Spring (76)

near the bracket on the Base (79).

Remove the Gas Spring Clip (77) from the end

of the Gas Spring (76) as described in step 8. If

necessary, rotate the Gas Spring to align the

end of the Gas Spring with the ball on the

bracket on the Base (79).

See the lower drawing. Press the end of the

Gas Spring (76) onto the ball on the bracket.

Note: t may be necessary to pull the Latch

Knob (70) to the right and move the Frame

(87) forward or backward as you press the

Gas Spring onto the ball.

Next, insert the end of the Gas Spring Clip (77)

into two of the small holes in the end of the Gas

Spring (76). Then, rotate the Gas Spring Clip

until it clips onto the Gas Spring.

Lower the Frame (87) to the floor. See HOW TO

LOWER THE TREADMILL FOR USE on page 16.

Make sure that the four Leveling Feet (not

shown) rest firmly on the floor (see HOW TO

LEVEL THE TREADMILL on page 14).

Bracket

8. Raise the Frame (see HOW TO FOLD THE

TREADMILL FOR STORAGE on page 15). Be

careful not to crack the Motor Hood (not

shown).

Raise the Gas Spring (76) to a vertical position

with the cylinder on the bottom as shown. See

the two small inset drawings. Using your fin-

gernail or the end of a screwdriver, press on the

end of the Gas Spring Clip (77) to loosen it from

the Gas Spring. Next, rotate the Gas Spring Clip

and pull it out of the Gas Spring. Be careful to

avoid losing the Gas Spring Clip. Note: Extra

Gas Spring Clips are included.

Then, press the end of the Gas Spring (76) onto

the ball on the bracket on the Frame (87). See

the lower drawing. Insert the Gas Spring Clip

(77) into the two indicated small holes in the end

of the Gas Spring. Then, rotate the Gas Spring

Clip until it clips onto the Gas Spring.

Holes

Bracket

Holes

Cylinder

Dieses Handbuch passt für folgende Modelle

Andere Weslo Tretmühle Handbücher

Weslo

Weslo Cadence S 8 Benutzerhandbuch

Weslo

Weslo WLTL29010 Bedienungsanleitung

Weslo

Weslo Cadence 75 Treadmill Bedienungsanleitung

Weslo

Weslo WETL91072 Cadence 910 Bedienungsanleitung

Weslo

Weslo Cadence 3150 Bedienungsanleitung

Weslo

Weslo Cadence 975 Bedienungsanleitung

Weslo

Weslo WETL59710.0 Bedienungsanleitung

Weslo

Weslo CADENCE AF 5.1 Bedienungsanleitung

Weslo

Weslo Cadence 915 Bedienungsanleitung

Weslo

Weslo WCTL25320 Bedienungsanleitung

Weslo

Weslo Weider 8.0 Bedienungsanleitung

Weslo

Weslo WLTL223040 Bedienungsanleitung

Weslo

Weslo Cadence 835 Bedienungsanleitung

Weslo

Weslo Sport 100 Treadmill Benutzerhandbuch

Weslo

Weslo Cadence 3260 Bedienungsanleitung

Weslo

Weslo WLTL11310.0 Bedienungsanleitung

Weslo

Weslo Cadence 3250 Bedienungsanleitung

Weslo

Weslo Cadence 800 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 10.0 P.i. Bedienungsanleitung

Weslo

Weslo Cadence 800 Treadmill Bedienungsanleitung

Weslo

Weslo Cadence 720 Bedienungs- und Wartungshandbuch

Weslo

Weslo Cadence 4500 Bedienungsanleitung

Weslo

Weslo WCTL2932.2 Bedienungsanleitung

Weslo

Weslo Cadence 200 Treadmill Benutzerhandbuch

Beliebte Tretmühle Handbücher anderer Marken

Treadly

Treadly TREADLY 2 Bedienungsanleitung

HEALTH ONE

HEALTH ONE Walk Ro Bedienungsanleitung

NordicTrack

NordicTrack T7.5 S Bedienungsanleitung

Gold's Gym

Gold's Gym ADVANTAGE GGTL12920 Bedienungsanleitung

Merax

Merax MS282992 Bedienungsanleitung

FYTTER

FYTTER RU-2SX Bedienungsanleitung

Precor

Precor 903 Bedienungsanleitung

FitLogic

FitLogic freewill d225 Bedienungsanleitung

HOP-SPORT

HOP-SPORT ESTIMA HS-3200LB Bedienungsanleitung

Horizon Fitness

Horizon Fitness Adventure 5 Plus Bedienungsanleitung

Stamia

Stamia InMotion II Bedienungsanleitung

Smooth Fitness

Smooth Fitness EVO 3i Bedienungsanleitung

NordicTrack

NordicTrack NETL81810.0 Bedienungsanleitung

Schwinn

Schwinn 830/Journey 8.0 Bedienungsanleitung

Keys Fitness

Keys Fitness HealthTrainer HT-740T Bedienungsanleitung

Spirit

Spirit XT8 Bedienungsanleitung

NordicTrack

NordicTrack T 14.0 Treadmill Bedienungsanleitung

Master

Master F22 Bedienungsanleitung