Whalen AVCEC54-AT Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory No. 15548

Table Top Console

Model # AVCEC54-AT

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the

store where it was purchased. Please call our customer service number and have your instructions

and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED: / /

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 2 Factory No. 15548

MANUFACTURER: Whalen Furniture Mfg., Inc.

CATALOG: Table Top Console (AVCEC54-AT)

DATE OF MANUFACTURE: August 2013

MADE IN CHINA

How to adjust the European adjustable hinges on doors

Shipping may cause doors to become out of alignment. If you find that the doors need to be

adjusted slightly, turn the appropriate screw as illustrated below.

1. TO ADJUST THE DOOR FORWARD OR

BACKWARD.

2. TO ADJUST THE DOOR TO RIGHT OR

TO LEFT.

3. TO ADJUST THE DOOR UP OR DOWN.

MAXIMUM RECOMMENDED WEIGHT LOADS

THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH

FLAT PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND

WEIGHT LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT

PANEL TVS OR EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE

CENTER OF THE UNIT; CRT TVS, IMPROPERLY POSITIONED FLAT PANEL TVS, OR FLAT

PANEL TVS OR OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND WEIGHT

LIMITS COULD FALL OFF OR BREAK THE UNIT

CAUSING POSSIBLE SERIOUS INJURY.

MAXIMUM LOAD 50 lb. (22.6 kg)

FITS UP TO MOST 60” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

PLACE TV BEHIND THE STOPPER

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 3 Factory No. 15548

Important

Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non-

abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual.

NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED

OFF WITH DAMP CLOTH.

Insert Dowel at least half way by tapping lightly with a rubber mallet, IF NECESSARY.

CAM LOCK SYSTEM OPERATION

HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS

1. Screw the Cam Bolt into the pre-drilled small holes on the panel. Connect both panels together; making sure

the Cam Bolt goes into the pre-drilled hole at the end of the panel with the Cam Lock.

2. Insert the Cam Lock into the pre-drilled large hole in the panel. Make sure the arrow on the Cam Lock is

pointed towards the Cam Bolt.

3. Once the Cam Bolt is connected inside the Cam Lock, take a Phillips screwdriver (not included) and

tighten the Cam Lock clockwise.

4. Plug the Cam Lock Cover into the cross slot of the Cam Locks to conceal the cam.

You are now ready to assemble the KD unit.

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 4 Factory No. 15548

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

A- Top Panel (1) B- Fixed Shelf (1) C- Bottom Panel (1)

D- Left Side Frame (1) E- Right Side Frame (1) F- Left Lower Partition Panel (1)

G- Right Lower Partition Panel (1) H- Upper Partition Panel (1) I- Upper Partition Molding (1)

J- Top Front Stretcher (1) K- Top Back Stretcher (1) L- Large Adjustable Shelf (2)

(With pilot holes for the back panel)

M- Small Adjustable Shelf (1) N- Left Door (1) O- Right Door (1)

P- Middle Door (1) Q- Back Panel (1) R- Support Foot w/Leveler (1) S- Cable Wheel (2)

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 5 Factory No. 15548

Parts and Hardware List

Please read completely through the instructions and verify that all listed parts and hardware are present

before beginning assembly.

(1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (4) M6 x 20 mm Bolt

(30+1 extra) (30+1 extra) (35+1 extra) (4+1 extra)

(5) #6 x 1/2” Zinc Screw (6) #6 x 1/2” Black Screw (7) #10 x 1-1/2” Screw (8) #5 x 1/2” Washer Head Screw

(12+1 extra) (3+1 extra) (6+1 extra) (6+1 extra)

(9) #5 x 5/8” Pan Head Screw (10) M3 x 19 mm Ring Shank Nail (11) Cam Lock Cover

(6+1 extra) (24+1 extra) (32+1 extra)

(12) Shelf Pin (13) Magnetic Catch (14) Strike Plate (15) Acrylic Stopper

(12+1 extra) (3) (3) (1)

(16) Handle (4) (17) Handle Bolt (4) (18) Door Hinge (6 sets)

Glue (1) Touch-up Pen (1) Tipping Restraint Hardware Kit (2)

(Included in plastic bag)

Tools required: Phillips screwdriver and Hammer (not provided).

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 6 Factory No. 15548

Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a

carpeted floor or the empty carton to avoid any scratch.

2. Position the Left and Right Side Frames (D and E) and the Right Lower Partition Panel (G) on a level

and protective surface with the holes facing up, as shown above.

3. Using the pilot holes as a guide, align and attach two Hinge Bases (18) onto the designated holes on the

Right Lower Partition Panel (G) and the hinge supports of the Side Frames (D and E). Make sure that

the middle slot of the Hinge Base will point towards the front of the unit when the unit is turned upright.

Door Hinge Base

(6 used in this step)

⑱

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 7 Factory No. 15548

Assembly Instructions

4. Align three Magnetic Catches (13) to the pilot holes on the Fixed Shelf (B) with the magnetic plates

facing the finished edge. And then fasten the Magnetic Catches (13) in place using two 5/8” Pan Head

Screws (9) per catch.

Magnetic Catch

(3 used in this step)

⑬

#5 x 5/8” Pan Head Screw

(6 used in this step)

⑨

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 8 Factory No. 15548

Assembly Instructions

5. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), the Fixed Shelf

(B), the Side Frames (D and E) and the Upper Partition Molding (I), as shown the illustration above.

Cam Bolt

(30 used in this step)

②

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 9 Factory No. 15548

Assembly Instructions

6. Insert 2 Wood Dowels (3) into the inner holes on the top edge of the Left Lower Partition Panel (F).

There are two cam bolt holes on the top edge. Make sure that you use a small amount of glue with both

ends of all dowels.

7. Align and attach the Left Lower Partition Panel (F) to the Fixed Shelf (B) by engaging two Cam Locks

(1) (Refer to page 3 on Cam Lock system operation supplement). As shown above. Make sure that the

finished edge of the Partition Panel (F) and the Fixed Shelf (B) point towards the same direction.

8. Repeat the same procedure to attach the Right Lower Partition Panel (G) to the Fixed Shelf (B).

M8 x 30 mm Wood Dowel

(4 used in this step)

③

Cam Lock

(4 used in this step)

①

Model # AVCEC54-AT

Please call for replacement parts or assistance: 1-866-942-5362

Whalen Furniture Mfg., Inc. Page 10 Factory No. 15548

Assembly Instructions

9. Fasten the Upper Partition Molding (I) to the Upper Partition Panel (H) using one Wood Dowel (3) and

two Cam Locks (1).

10. Insert two Wood Dowels (3) into the inner holes on the bottom edge of the Upper Partition Panel (H).

NOTE: The long edge without cam bolt holes is the bottom edge.

11. Align the inserted Wood Dowels (3) under the assembled Upper Partition Panel (H) with the center

holes on the Fixed Shelf (B) and press them together. Ensure the Upper Partition Molding (I) points

towards the finished edge of the Fixed Shelf. Insert two 1-1/2” Screws (7) through the drilled holes on

the Fixed Shelf (B) and securely screw into the bottom holes of the Upper Partition Panel (H).

M8 x 30 mm Wood Dowel

(3 used in this step)

③

#10 x 1-1/2” Screw

(2 used in this step)

⑦

Cam Lock

(2 used in this step)

①

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen AVTEC48-TC Bedienungsanleitung

Whalen

Whalen Westport SMUBCH Betriebsanleitung

Whalen

Whalen Mainstays MS18-03-1011-02 Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CUS7PD-4-BE Bedienungsanleitung

Whalen

Whalen TV Console Bedienungsanleitung

Whalen

Whalen Wesleyan Drop Lid Secretary Bedienungsanleitung

Whalen

Whalen SIG3IN1CGT Bedienungsanleitung

Whalen

Whalen TV Console BBAVCL54-SMB Bedienungsanleitung

Whalen

Whalen BBHC60DBC Bedienungsanleitung

Whalen

Whalen OD-LA60LD Bedienungsanleitung

Whalen

Whalen CSC7PCHD-3VN Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC5430WD-4PC Bedienungsanleitung

Whalen

Whalen Bayside CSC7PD-5 Bedienungsanleitung

Whalen

Whalen Bayside CSC72BK-7 Bedienungsanleitung

Whalen

Whalen LLAVC48C Bedienungsanleitung

Whalen

Whalen Breckenridge Executive Chair Bedienungsanleitung

Whalen

Whalen odus-tdpd Bedienungsanleitung

Whalen

Whalen Hendricks Series Bedienungsanleitung

Whalen

Whalen WSWB72-ST-E Bedienungsanleitung

Whalen

Whalen WSC72-MW-E Bedienungsanleitung

Whalen

Whalen XLCD-15 Bedienungsanleitung

Whalen

Whalen Astoria WC-459 Bedienungsanleitung

Whalen

Whalen Victory VIC7PD-S Bedienungsanleitung

Whalen

Whalen Bayside CUS54WD-6 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung