Whalen XLCD-15 Bedienungsanleitung

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Date 2017-03-23 Rev. 0001-B Factory: FOCIDI

3-in-1TM TV Cabinet

Model # XLCD-15

U.S. Patents 8,079,311 & 8,191,485

This item is designed to be a 3-in-1 configuration. Please choose the option that best suits your

needs. DO NOT discard any of the hardware or parts that you will not use on your chosen option.

This will allow you to use this TV Console in different configurations at a later date, if desired.

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to

the store where it was purchased. Please call our toll-free customer service number and have

your instructions and parts list ready to provide the model name, part name or factory number:

866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to

parts@whalenfurniture.com

LOT NUMBER:

DATE PURCHASED: / /

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: 3-in-1

TV Cabinet (XLCD-15)

MADE IN CHINA

How to adjust the European adjustable hinges on doors

Shipping may cause doors to go out of alignment. If you find that the doors need to be

adjusted slightly, turn the appropriate screw, as illustrated.

1. TO ADJUST THE DOOR FORWARD OR

BACKWARD.

2. TO ADJUST THE DOOR TO RIGHT OR

TO LEFT.

3. TO ADJUST DOOR UP OR DOWN.

MAXIMUM RECOMMENDED WEIGHT LOADS

FITS UP TO MOST 55” FLAT PANEL TVs

MAXIMUM LOAD 135 lb. (61.2 kg)

FITS UP TO MOST 55” FLAT PANEL TVs

WITHOUT SWIVELING BRACKET

MAXIMUM LOAD 135 lb. (61.2 kg)

MAXIMUM LOAD 50 lb. (22.6 kg)

PLACE TV BEHIND THE STOPPER

THIS UNIT IS NOT INTENDED FOR USEWITH CRT TVS. USE ONLY WITH FLAT

PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT

LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR

EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTRE OF THE UNIT; THE

BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF

THE UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL

TVS, OR FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED RECOMMENDED

SIZE AND WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE

SERIOUS INJURY.

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present

before beginning assembly.

A- TOP SHELF FRAME (1) B- BOTTOM METAL FRAME (1) C- FRONT FRAME (1)

D- SPINE (1) E- LEFT SIDE PANEL (1) F- RIGHT SIDE PANEL (1)

G- DIVIDER PANEL (1) H- BOTTOM PANEL (1) I- BACK PANEL (1)

J- DOOR PANEL (2) K- TOP GLASS (1) L- ADJUSTABLE GLASS SHELF (2)

M- SWIVELING BRACKET (1) N- MOUNTING FRAME (1)

O- MONITOR BRACKET (2) P- CABLE WHEEL (2)

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present

before beginning assembly.

(1) SUCTION CUP (6+1 extra) (2) 1/2” BOLT (4+1 extra) (3) 5/8” BOLT (14+1 extra)

(4) 1” BOLT (7+1 extra) (5) 1-1/4” BOLT (4+1 extra) (6) 2-1/4” BOLT (4+1 extra)

(7) LOCK WASHER (8) FLAT WASHER (9) 2” SCREW

(22+1 extra) (22+1 extra) (2+1 extra)

(10) 1/2” SCREW (11) SHELF SUPPORT (12) CONCRETE ANCHOR

(16+1 extra) (8+1 extra) (4)

(13) 2-1/2” LAG BOLT (4) (14) LARGE FLAT WASHER (4+1 extra) (15) ACRYLIC STOPPER (1)

(16) HANDLE w/BOLTS (2) 4 mm HEX WRENCH (2)

TOUCH-UP PEN (1) TIPPING RESTRAINT HARDWARE KIT (1)

(Inside Plastic Bag)

TV Mounting Kit

M4 x 12 BOLT (4) M4 x 30 BOLT (4) M5 x 12 BOLT (4) M5 x 30 BOLT (4)

M6 x 12 BOLT (4) M6 x 35 BOLT (4) M8 x 16 BOLT (4) M8 x 40 BOLT (4)

M4 LOCK WASHER (4) M5 LOCK WASHER (4) M6 LOCK WASHER (4) M8 LOCK WASHER (4)

LARGE SPACER (4) SMALL SPACER (4) M4/M5 FLAT WASHER (8) M6/M8 FLAT WASHER (4)

Tools required: Hex wrench (provided) and Phillips screwdriver (not provided).

Assembly Instructions

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled,

go back and fully tighten all bolts. This will make the assembly easier.

1. Locate the FRONT FRAME (C) and place it on a scratch free surface with the threaded

sockets facing up, as shown above.

2. Fasten the TOP SHELF FRAME (A) to the FRONT FRAME (C) using four 1-1/4” BOLTS (5)

with LOCK WASHERS (7) and FLAT WASHERS (8). Make sure that the metal brackets on

the TOP SHELF FRAME (A) and the Floor Levelers on the FRONT FRAME (C) point towards

the same direction.

3. Fasten the BOTTOM METAL FRAME (B) to the FRONT FRAME (C) with the metal tabs up.

Use three 1” BOLTS (4) and tighten with the provided HEX WRENCH.

LOCK WASHER

(4 used in this step)

⑦

FLAT WASHER

(4 used in this step)

⑧

1” BOLT

(3 used in this step)

④

1-1/4” BOLT

(4 used in this step)

⑤

Assembly Instructions

4. Align the end wood dowels on the LEFT SIDE PANEL (E) with the pre-drilled holes of the

FRONT FRAME (C) and press them together. Make sure the top edges are even with each

other and the Hinge Bases face inward. Securely screw two 5/8” BOLTS (3) with WASHERS

(7 and 8) through the metal brackets on the TOP SHELF FRAME (A) and then into the

threaded inserts on the LEFT SIDE PANEL (E).

5. Secure the LEFT SIDE PANEL (E) to the BOTTOM METAL FRAME (B) with two 1” BOLTS (4).

Tighten all the bolts with the HEX WRENCH provided making sure there are no gaps between

the Left Side Panel (E) and Front Frame (C).

6. Repeat the same procedure to attach the RIGHT SIDE PANEL (F) on the other side.

FLAT WASHER

(4 used in this step)

⑧

LOCK WASHER

(4 used in this step)

⑦

1” BOLT

(4 used in this step)

④

5/8” BOLT

(4 used in this step)

③

UP F

Assembly Instructions

7. Using the end dowels as a guide, align and attach the DIVIDER PANEL (G) to the BOTTOM

PANEL (H) using two 2” SCREWS (9). Tighten the screws with a Phillips screwdriver.

2” SCREW

(2 used in this step)

⑨

Assembly Instructions

8. Align and attach the last assembly to the assembled frame. Insert and screw two 5/8” BOLTS (3)

with WASHERS (7 and 8) through the metal brackets on the middle rail of the TOP SHELF

FRAME (A) into the DIVIDER PANEL (G).

9. Fasten the BOTTOM PANEL (H) to the BOTTOM METAL FRAME (B) using six 1/2” SCREWS

(10) through the metal tabs.

FLAT WASHER

(2 used in this step)

⑧

LOCK WASHER

(2 used in this step)

⑦

1/2” SCREW

(6 used in this step)

⑩

5/8” BOLT

(2 used in this step)

③

Assembly Instructions

10.Now, go back and tighten all the BOLTS and SCREWS. Make sure all the parts are tight and

there are no gaps between the parts. This will help keep the unit square.

11.Position the BACK PANEL (I) to the back edges of the assembled frame so that the pre-drilled

holes for the SPINE (D) overlap the threaded sockets on the TOP SHELF FRAME (A). Using the

pre-drill holes on the BACK PANEL (I) as a guide when attaching with the 1/2” SCREWS (10).

NOTE: We recommend attaching the back panel with the 1/2” SCREWS at the corners first.

1/2” SCREW

(10 used in this step)

⑩

Inhaltsverzeichnis

Sprachen:

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Industrial Metal and Wood Tool Cart Bedienungsanleitung

Whalen

Whalen Breenly SPUS-BRMF-WH Bedienungsanleitung

Whalen

Whalen Barkston SPLS-BKLF Bedienungsanleitung

Whalen

Whalen AVCEC54-AT Bedienungsanleitung

Whalen

Whalen Huntingdon EC-HUDF Bedienungsanleitung

Whalen

Whalen Villa Tuscano Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC7PD-1N Bedienungsanleitung

Whalen

Whalen Sedona MNFP54BF23-5 Bedienungsanleitung

Whalen

Whalen Bayside CUS60AC-1 Bedienungsanleitung

Whalen

Whalen Bayside FURNISHINGS CUKGLBST-3G Bedienungsanleitung

Whalen

Whalen WSHD5PSB Bedienungsanleitung

Whalen

Whalen CCA4836AC-4 Bedienungsanleitung

Whalen

Whalen Huntingdon EC-HU48D Bedienungsanleitung

Whalen

Whalen 53SNR2301BAS Bedienungsanleitung

Whalen

Whalen Bayside Furnishings Braeden CSC7PD-7 Bedienungsanleitung

Whalen

Whalen Jasper Chrome & Glass Desk Bedienungsanleitung

Whalen

Whalen Luke Twin over Twin Loft Bunk Bed with Desk Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC72AC-4 Bedienungsanleitung

Whalen

Whalen LEVELUP SPLS-LTCGD Bedienungsanleitung

Whalen

Whalen O'nin White Room Divider Bedienungsanleitung

Whalen

Whalen ODUS-TWVD Bedienungsanleitung

Whalen

Whalen Triton ODUS-TWVD18 Bedienungsanleitung

Whalen

Whalen Belmont 2-in-1 Work Station Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUS78BK-1 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung