Whalen WS184872BW-SB5MSC2 Bedienungsanleitung

Please call for replacement parts or assistance: 1-866-942-5362

Pacific Standard Time: 8:30 am –4:30 pm PST Monday to Friday

Or visit our web sitewww.whalenstorage.com

Factory #11906

Page # 1

ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL

PARTS, SHARP POINTS, SHARP EDGES

Video Instruction Guides

Go tohttp://whalen.showuhow.com to view step-by-step instructional

videos for assembling and installing your product. Enter the following

product number on the ShowUhow homepage.

625073

SHELF MAXIMUM CAPACITY:1000LBS/453.5KG.

ENTIRE UNIT MAXIMUM CAPACITY:5000LBS/2267.9KG.

CONCENTRATED LOAD CAPACITY 68.18KG/150LBS (PSF)

PER SQUARE FOOT.

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 2

Parts List

Please read completely through the instructions and verify that all parts

listed are present before beginning assembly.

A-Angle Post (8-ea.) B- Long Double Rivet Beam (10-ea.)

C-Short Double Rivet Beam (10-ea.) D-PB Shelf (5-ea.)

E-Post Cap (16-ea.) F- Post Inserts (4-ea.)

(Used on Storage Rack)

G- Post Clip (2-ea.)

(Used on Workbench)

Tool Required: Rubber Mallet (NOT INCLUDED)

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 3

Storage Rack is not recommended for outdoor use.

1. Do not exceed 1000lb./453.5kg per shelf. Do not exceed 5000lb./2267.9kg per unit.

2. Weight should be evenly distributed on the shelf surface. Weight that is

concentrated in the center of the shelf will reduce the shelf capacity.

3. Load small stable items on the top shelves, heavier and bulkier items should

bestored on the lower shelves. Load unit placing objects from the bottom to top.

This will ensure stability of overall unit.

4. Never climb or stand on the unit and do not use as a ladder.

5. Not intended to be used by children.

6. Do not alter the product in any way as it could compromise the performance of the

unit as intended and will void all warranties.

Failure to follow these guidelines can result in

properly damage or personal injuries.

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 4

Assembly Instructions

Note: Assemble the unit on a sturdy and level surface. Avoid assembling on

carpet. To facilitate assembly we recommend having two persons assemble the

unit.If you do not understand these directions, or have any doubts about the safety

of the installation, please call a qualified contractor or contact Whalen Storage at 1-

866-942-5362.We can assist you or give you directions.

Make sure all the rivets are locked in place before using the Work Bench, if you

have any defective parts please do not use, improper installation may result in

damages or injuries. Assembly Instructions

1. Unpack the unit and confirm that you have all the hardware and required parts listed.

Use a cloth or wood block to protect the surface finish of the product during assembly.

Assemble the unit on a sturdy and level surface. Avoid assembly on carpet.

Option #1 5-ShelfStorage Rack

2. Join Short Double Rivet Beam (part C) into the

two bottom keyholes of Angle Post (part A). Be

sure that the flange is up and drive the rivets to the

bottom of the keyhole by hitting the beam with a

rubber mallet. Repeat to add second Angle Post

(Part A).

3. Attach Long Double Rivet Beam (part B) to the bottom keyholes of Angle Post (Part A).

Hit the beam with a rubber mallet to lock pieces together. Repeat to add second Long

Double Rivet Beam (Part B).

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 5

Assembly Instruction

4. Start top end assembly by joining a Short Double Rivet Beam (part C) into the top

keyholes of a 36”Angle Post (part A). Add the second 36”Angle Post. Hit the beam

close to joints to lock pieces together.

5. Repeat last step for the opposite side top end assembly.

6. Before joining the top end assembly to the

bottom frame assembly. Insert Post Inserts

(part F) into the Angle Posts (part A) on the

Bottom frame assembly. As shown in detail #4.

7. Repeat the last two step for

the opposite top end

assembly.

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 6

Assembly Instructions

8. Add two Long Double Rivet Beams (part B) to mid section. Be sure to use the bottom

keyholes of the top assembly angle post and top keyholes of the bottom assembly.

Follow the proper keyholes as shown in detail #5. Be sure to have all rivets in the

keyholes before hitting the beam.

9. Add two additional Long Double Rivet Beam to top two keyholes of the angle post as

shown. Be sure to have all rivets in the keyholes before hitting the beam.As shown in

detail#6.

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 7

Assembly Instruction

10. Assemble the remaining Short and Long Double Rivet Beams to your desired location

on the angle post. Hit Beams to lock pieces together. As shown in detail#7.

11. Add the Post Caps (part E) to tops of the 4 corner Angle Posts. As shown in the detail

#8.Lay the shelf decks into place.

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 8

Assembly Instruction

OPTION #2 2-PC WORKBENCH

1. Repeat step 2 through 3 to create bottom frame assembly.

2. Add two Short Double Rivet Beams

(part A) and two Long Double Rivet

Beams (part B) to the top keyholes of

the Angle Posts. Hit the beams near the

joints with a rubber mallet to lock

pieces together, As shown in detail #1.

3. Start the second unit by joining a Short Double Rivet Beam (part C) into the top

two keyholes of a 36”Angle Post (part A). Add an additional 36”Angle Post. Hit

the beam with a rubber mallet to lock pieces together. As shown in detail # 2.

Install the second Short Double Rivet Beam at your desired location on the

posts.

4. Repeat the last step for the

opposite end assembly.

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 9

Assembly Instruction

5. Complete the second unit by installing remaining Long Double Rivet Beams

(part B). Make sure the Long Double Rivet Beams are flush with the Short Ones

after installing. As shown in detail #3. Hit the beams near the joints with a

rubber mallet to lock pieces together.

6. Lay the Shelf Decks (part D) in place. Add Post Caps (Part E) to tops of the

Angle Posts. As shown in detail# 4.

Please call for replacement parts or assistance: 1-866-942-5362

Factory #11906

Page # 10

Assembly Instruction

7. If desired place the two units end to end and attach posts with clip G as shown

in Detail #5. In last instruction step.

Care and Maintenance

Use a soft, clean cloth that will not scratch the surface when dusting.

Using solvents of any kind on your product may damage the finish.

Do not use any harsh abrasives or chemicals to clean any metal surfaces as it

may damage the protective coating.

Metal will rust if the finish is scratched or if your product is exposed to excessive

humidity, particularly in salt water locations.

Serious or fatal crushing injuries can occur from furniture

tip-over. To help prevent tip-over:

Place heaviest items on the lowest rack.

Do not place heavy objects on the top of this product.

Never allow children to climb or hang on hanger poles.

Use of tip-over restraints may only reduce but not eliminate the risk of tip-over.

Contact your local hardware store for tip-over restraints that will best meet the

area where unit will be used.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Whalen Inneneinrichtung Handbücher

Whalen

Whalen Bayside FURNISHINGS CSC7PD-12-T Bedienungsanleitung

Whalen

Whalen Breckenridge Executive Chair Bedienungsanleitung

Whalen

Whalen Montreal Laptop Desk Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CUSWMB-1 Bedienungsanleitung

Whalen

Whalen WF60CVG Bedienungsanleitung

Whalen

Whalen Tustin Parsons ECOM-PARS1 Bedienungsanleitung

Whalen

Whalen Bayside CSC9PD-6 Bedienungsanleitung

Whalen

Whalen Z BEAM WSZB1848-5BW-2 Bedienungsanleitung

Whalen

Whalen Industrial Metal and Wood Tool Cart Bedienungsanleitung

Whalen

Whalen Midland Twin over Full Bunk Bed Bedienungsanleitung

Whalen

Whalen Bayside CUS3PO-4 Bedienungsanleitung

Whalen

Whalen Bayside CSC72TC-10 Bedienungsanleitung

Whalen

Whalen WF24FVB Bedienungsanleitung

Whalen

Whalen LWF30AVG Bedienungsanleitung

Whalen

Whalen BBAVC60-MBC Bedienungsanleitung

Whalen

Whalen Annual Event WMFP41BT-2 Bedienungsanleitung

Whalen

Whalen ODUS-TWVD Bedienungsanleitung

Whalen

Whalen WSUC-4C Bedienungsanleitung

Whalen

Whalen Shelby 60in Bedienungsanleitung

Whalen

Whalen BBAVCD54N Bedienungsanleitung

Whalen

Whalen PRO-9 Bedienungsanleitung

Whalen

Whalen Astoria WC-459 Bedienungsanleitung

Whalen

Whalen WSF48MS26GAO Bedienungsanleitung

Whalen

Whalen Bayside Furnishings CSC7PD-1N Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung