WPI PIMT201 Bedienungsanleitung

WORLD

PRECISION

INSTRUMENTS

PIMT201

Inverted Microscope

Serial No._____________________

www.wpiinc.com

INSTRUCTION MANUAL

022321

PIMT201

World Precision Instruments i

be reproduced or translated into any language, in any form, without prior written permission of

World Precision Instruments, Inc.

CONTENTS

ABOUT THIS MANUAL ................................................................................................................... 1

INTRODUCTION .............................................................................................................................. 2

Unpacking................................................................................................................................... 2

MICROSCOPE SETUP ..................................................................................................................... 3

Setting up the Base and Stage .............................................................................................. 3

Installing the Condenser and Lamp Housing .................................................................... 7

Setting up the Stage and Phase Aperture ........................................................................10

Installing the Trinocular Head Assembly...........................................................................10

Installing the Objectives ........................................................................................................12

Installing Adapter Plates, Eyepieces and Filters ..............................................................15

Phase Contrast Alignment ....................................................................................................18

Adjusting the Phase Contrast Alignment.....................................................................19

Mounting a Camera................................................................................................................21

Direct C-Mount on a Threaded Triangular Attachment...........................................21

Vertical Eye Tube Mounting............................................................................................22

Eyepiece Mounting............................................................................................................22

Eyepiece Plus C-Mount Mounting.......................................................................................23

BASIC MICROSCOPE OPERATIONS...........................................................................................24

Camera Shutter (Optical) Path.............................................................................................24

Coaxial X-Y Control .................................................................................................................25

Micrometer Focus Control....................................................................................................25

Focus Tensioning Adjustments............................................................................................26

WARRANTY .....................................................................................................................................27

Claims and Returns ................................................................................................................27

Repairs.......................................................................................................................................27

ii World Precision Instruments

PIMT201

World Precision Instruments 1

ABOUT THIS MANUAL

The following symbols are used in this guide:

This symbol indicates a CAUTION. Cautions warn against actions that can

cause damage to equipment. Please read these carefully.

This symbol indicates a WARNING. Warnings alert you to actions that can

cause personal injury or pose a physical threat. Please read these carefully.

NOTES and TIPS contain helpful information.

Fig. 1—PIMT201 Inverted microscope

2 World Precision Instruments

INTRODUCTION

This document details the assembly of the PIMT201 inverted microscope. It includes

optional installation of a camera. All cameras and mounting adapters are sold

separately.

Unpacking

Upon receipt of this instrument, make a thorough inspection of the contents and

check for possible damage. Missing cartons or obvious damage to cartons should be

noted on the delivery receipt before signing. Concealed damage should be reported

at once to the carrier and an inspection requested. Please read the section entitled

“Claims and Returns” on page 27 of this manual. Please contact WPI Customer

Service if any parts are missing at 941.371.1003 or [email protected].

Returns: Do not return any goods to WPI without obtaining prior approval (RMA

# required) and instructions from WPI’s Returns Department. Goods returned

(unauthorized) by collect freight may be refused. If a return shipment is necessary,

use the original container, if possible. If the original container is not available, use a

suitable substitute that is rigid and of adequate size. Wrap the instrument in paper or

plastic surrounded with at least 100mm (four inches) of shock absorbing material. For

further details, please read the section entitled “Claims and Returns” on page 27 of

this manual.

Fig. 2—Contents of the two boxes

PIMT201

World Precision Instruments 3

MICROSCOPE SETUP

Before setting up the microscope, carefully open the box and inspect its contents. The

pieces of the microscope are stored in two Styrofoam containers, and many of the

pieces are wrapped in plastic (Fig. 2). Carefully unwrap each piece before setting up

the instrument. The following instructions graphically show how to setup your inverted

microscope.

NOTE: If you have a problem/issue that falls outside the denitions of this manual,

contact the WPI Technical Support team at 941.371.1003 or technicalsupport@wpiinc.

com.

Setting up the Base and Stage

1. Remove the base of the microscope and set it up on a rm tabletop surface (Fig.

3). Fig. 4 shows the back of the microscope base. The A/C power plug adapter,

the serial number and the fuse compartment are located on the back. Fig. 5

shows the power switch and lamp brightness control located on the side of the

microscope.

Condenser Mount

Lamp Connector

Head Mount

Stage

5-Position Nosepiece

Focus Control Knob

FrontBack

Fig. 3—Base of the microscope.

4 World Precision Instruments

Fig. 4—Back of the microscope base showing power connection, serial number and

fuse compartment

Fig. 5—Power switch and lamp brightness control on the side of the microscope

2. Locate the coaxial stage assembly. It is shown in Fig. 6. The captive mounting

screws are located on the side of it (Fig. 7).

Fig. 6—Coaxial stage assembly

PIMT201

World Precision Instruments 5

Fig. 7—Captive mounting screws on the coaxial stage assembly

3. Tip the microscope base over on its left side to reveal the location of the screw

mounts. Then, position the coaxial stage (Fig.8). Fig. 9 shows a close up of the

captive screws.

Fig. 8—Microscope on its side

Fig. 9—Close up of captive mounting screws

4. With a at head screwdriver, gently tighten the captive screws (Fig. 10).

Fig. 10— Fig. 10–Gently tighten the captive mounting screws.

6 World Precision Instruments

5. Locate the left extension stage plate bottom shown in Fig. 11 (bottom view) and

Fig. 12 (top view).

Fig. 11—Extension stage plate (bottom view)

Fig. 12—Extension stage plate (top view)

6. Push extension arm of the coaxial stage assembly inward so that you do not

damage it when you mount the left extension stage plate (Fig. 13).

Fig. 13—Extension arm of coaxial stage assembly.

7. Then, with the microscope base laying on its right side, locate the captive screws

and mounting holes for left stage plate (Fig. 14) and install the left stage plate

(Fig. 15).

Fig. 14—Left stage plate captive screws

Fig. 15—Plate installed viewed from below

Inhaltsverzeichnis

Andere WPI Mikroskop Handbücher

WPI

WPI PZMIII Bedienungsanleitung

WPI

WPI PZMIV Bedienungsanleitung

WPI

WPI INV-101 Bedienungsanleitung

WPI

WPI MF200 Bedienungsanleitung

WPI

WPI PZMIV Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung