Accu-Scope 3002 Bedienungsanleitung



MANUAL



73 Mall Drive, Commack, NY 11725 • 631-864-1000 (P) • 631-543-8900 (F)

www.accu-scope.com • [email protected]

3002

MICROSCOPE SERIES



ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 2

CONTENTS

SAFETY NOTES ..................................................................................................................3

CARE AND MAINTENANCE................................................................................................3

INTRODUCTION..................................................................................................................4

UNPACKING AND COMPONENTS.....................................................................................4

COMPONENTS DIAGRAMS................................................................................................5

CONTROLS DIAGRAM.....................................................................................................6-7

ASSEMBLY DIAGRAM & PROCEDURE ........................................................................8-12

ADJUSMENT & OPERATION

BRIGHTNESS.................................................................................................................13

PLACING THE SPECIMEN...........................................................................................13

FOCUSING TENSION .....................................................................................................14

FOCUSING ...................................................................................................................14

CONDENSER ...............................................................................................................15

IRIS DIAPHRAGM.........................................................................................................15

INTERPUPILLARY DISTANCE.....................................................................................16

EYEPIECE DIOPTER ...................................................................................................16

LED LAMP SPECIFICATIONS, OPERATION, RECHARGING..........................................17

TROUBLESHOOTING LED LAMP.....................................................................................18

TECHNICAL SPECIFICATIONS ........................................................................................19

TROUBLESHOOTING...................................................................................................20-22

MAINTENANCE..................................................................................................................23

SERVICE............................................................................................................................23

WARRANTY.......................................................................................................................23

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 3

SAFETY NOTES

1. Open the shipping carton carefully to prevent any accessory, i.e. objectives or eyepieces, from

dropping and being damaged.

2. Do not discard the molded Styrofoam container; the container should be retained should the

microscope ever require reshipment.

3. Keep the instrument out of direct sunlight, high temperature or humidity, and dusty environments.

Ensure the microscope is located on a smooth, level and firm surface.

4. If any specimen solutions or other liquids splash onto the stage, objective or any other component,

disconnect the power cord immediately and wipe up the spillage. Otherwise, the instrument may be

damaged.

5. All electrical connectors (power cord) should be inserted into an electrical surge suppressor to

prevent damage due to voltage fluctuations.

6. For safety when replacing the LED bulb or fuse, be sure the main switch is off (“O”), remove the

power cord, and replace the LED bulb after the bulb and the lamp house has completely cooled.

7. Confirm that the input voltage indicated on your microscope corresponds to your line voltage. The

use of a different input voltage other than indicated will cause severe damage to the microscope.

CARE AND MAINTENANCE

1. Do not attempt to disassemble any component including eyepieces, objectives or focusing assembly.

2. Keep the instrument clean; remove dirt and debris regularly. Accumulated dirt on metal surfaces

should be cleaned with a damp cloth. More persistent dirt should be removed using a mild soap

solution. Do not use organic solvents for cleansing.

3. The outer surface of the optics should be inspected and cleaned periodically using an air stream from

an air bulb. If dirt remains on the optical surface, use a soft cloth or cotton swab dampened with a

lens cleaning solution (available at camera stores). All optical lenses should be swabbed using a

circular motion. A small amount of absorbent cotton wound on the end of a tapered stick such as

cotton swabs or Q-tips, makes a useful tool for cleaning recessed optical surfaces. Avoid using an

excessive amount of solvents as this may cause problems with optical coatings or cemented optics

or the flowing solvent may pick up grease making cleaning more difficult. Oil immersion objectives

should be cleaned immediately after use by removing the oil with lens tissue or a clean, soft cloth.

4. Store the instrument in a cool, dry environment. Cover the microscope with the dust cover when not

in use.

5. ACCU-SCOPE®microscopes are precision instruments which require periodic preventative

maintenance to maintain proper performance and to compensate for normal wear. An annual

schedule of preventative maintenance by qualified personnel is highly recommended. Your

authorized ACCU-SCOPE® distributor can arrange for this service.

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 4

INTRODUCTION

Congratulations on the purchase of your new ACCU-SCOPE® microscope. ACCU-SCOPE®

microscopes are engineered and manufactured to the highest quality standards. Your microscope will

last a lifetime if used and maintained properly. ACCU-SCOPE® microscopes are carefully assembled,

inspected and tested by our staff of trained technicians in our New York facility. Careful quality control

procedures ensure each microscope is of the highest quality prior to shipment.

UNPACKING AND COMPONENTS

Your microscope arrived packed in a molded Styrofoam container. Do not discard the container: the

Styrofoam container should be retained for reshipment of your microscope if needed. Avoid placing the

microscope in dusty surroundings or in high temperature or humid areas as mold and mildew will form.

Carefully remove the microscope from the Styrofoam container by its arm and base and place the

microscope on a flat, vibration-free surface.

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 5

COMPONENTS DIAGRAM

Iris Diaphragm

Adjustment Lever

Interpupillary Distance Adjustment

Binocular Viewing Head

Coarse Focus

Adjustment Knob

Eyepieces

Objective

Mechanical Stage

Illuminator Housing

On/Off Switch

Fine Focus

Adjustment Knob

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 6

CONTROLS DIAGRAMS

Diopter

Adjustment Ring

Interpupillary Distance Adjustment

Condenser

Adjustment Knob

Upper Limit

Stage Locking

Lever

Variable Light Intensity Dial

Coarse Focusing Knob

Fine Focusing Knob

3002 MICROSCOPE SERIES

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 7

CONTROLS DIAGRAMS (continued)

Y Stage Movement

Adjustment Knob

X Stage Movement

Adjustment Knob

Fine Focusing

Adjustment Knob

Coarse Focusing

Adjustment Knob

Tension

Adjustment Collar

On/Off Switch

Iris Diaphragm

Adjustment Lever

3002 MICROSCOPE SERIES

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 8

ASSEMBLY DIAGRAM

The diagram below shows how to assemble the various components. The numbers indicate the order of

assembly. Your microscope was preassembled by our factory technicians at our New York facility prior

to shipment. Should you need to disassemble/assemble your microscope in the future, please follow the

instructions outlined below.

When assembling the microscope, make sure that all parts are free of dust and dirt, and avoid scratching

any parts or touching glass surfaces.

Eyepieces

Objectives

Power Cord

Binocular Viewing Head

③

④

②

①

3002 MICROSCOPE SERIES

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 9

ASSEMBLY (continued)

Installing the Binocular Viewing Head

Loosen the lock screw and carefully insert the

binocular viewing head into the main body.

Rotate the head so it is facing forward, then

tighten the lock screw, as shown in Fig. 1 & 2.

Installing the Eyepieces

Remove the protective caps from the eyepiece

tubes. Insert the eyepieces into the eyepiece

tubes as shown in Fig. 3 & 4.

Fig. 1

Fig. 4

Fig. 2

Fig. 3

3002 MICROSCOPE SERIES

ACCU-SCOPE®73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com 10

ASSEMBLY (continued)

Installing the Objectives

Adjust the coarse focus knob until the

mechanical stage reaches its lowest limit

position.

Screw the 4×objective into the nosepiece from

the left or the right side, then rotate the

nosepiece clockwise and mount other objectives

by the sequence of low to high magnification as

shown in Fig. 6.

Installing the Glass Filter

Swing out the condenser holder ①(Fig. 7) and

insert the filter into the holder ②. Swing the

holder back in place.

Fig. 5

Fig. 6

Fig. 7

Andere Handbücher für 3002

Inhaltsverzeichnis

Andere Accu-Scope Mikroskop Handbücher

Accu-Scope

Accu-Scope 3052-LED Bedienungsanleitung

Accu-Scope

Accu-Scope 3000-LED-SPH Bedienungsanleitung

Accu-Scope

Accu-Scope 3078-HDR Bedienungsanleitung

Accu-Scope

Accu-Scope EXS-210 Bedienungsanleitung

Accu-Scope

Accu-Scope 3025 Series Bedienungsanleitung

Accu-Scope

Accu-Scope 3025 Series Bedienungsanleitung

Accu-Scope

Accu-Scope 3078-HD Bedienungsanleitung

Accu-Scope

Accu-Scope 3025 Betriebsanleitung

Accu-Scope

Accu-Scope 3075-GS Bedienungsanleitung

Accu-Scope

Accu-Scope EXC-120 SERIES Bedienungsanleitung

Accu-Scope

Accu-Scope EXI-600 Bedienungsanleitung

Accu-Scope

Accu-Scope Excelis HD Bedienungsanleitung

Accu-Scope

Accu-Scope 3012 Betriebsanleitung

Accu-Scope

Accu-Scope EXC-100 Series Bedienungsanleitung

Accu-Scope

Accu-Scope 3002-CB Forensic Comparison Series Bedienungsanleitung

Accu-Scope

Accu-Scope 3025-2 Betriebsanleitung

Accu-Scope

Accu-Scope 3061 Zoom Stereo Series Bedienungsanleitung

Accu-Scope

Accu-Scope 3055 Bedienungsanleitung

Accu-Scope

Accu-Scope EXS-210-24 Bedienungsanleitung

Accu-Scope

Accu-Scope 3052-GEM Bedienungsanleitung

Accu-Scope

Accu-Scope 3019 Bedienungsanleitung

Accu-Scope

Accu-Scope 3065 Bedienungsanleitung

Accu-Scope

Accu-Scope EXM-150 SERIES Bedienungsanleitung

Accu-Scope

Accu-Scope EXC-350-PH Bedienungsanleitung

Beliebte Mikroskop Handbücher anderer Marken

Thermo Scientific

Thermo Scientific Nicolet iN10 Leitfaden

National

National DC3-163 Bedienungsanleitung

KERN Optics

KERN Optics OPE-1 Bedienungsanleitung

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Bedienungsanleitung

Prior

Prior Lux POL Bedienungsanleitung

Opitec

Opitec Smartscoop 115615 Bedienungsanleitung

KERN

KERN OPO-1 Bedienungsanleitung

Topcon

Topcon SP-1P Bedienungsanleitung

Motic

Motic PA43 Bedienungsanleitung

Leica

Leica DVM5000 Benutzerhandbuch

MshOt

MshOt MZ62 Bedienungsanleitung

KERN Optics

KERN Optics OZR-5 Bedienungsanleitung

VWR

VWR VisiScope 384 Series Bedienungsanleitung

Nikon

Nikon ECLIPSE E200 POL Bedienungsanleitung

Leica

Leica DI C800 Handbuch

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Bedienungsanleitung

Olympus

Olympus SZ61 Bedienungsanleitung