ACME Solar Flare Bedienungsanleitung

CONTENTS

1. Safety Instructions ......................................................................................... 2

2. Technical Specifications ................................................................................. 4

3. Control Panel ................................................................................................. 6

4. Color/Gobo .................................................................................................... 7

5. How To Set The Unit....................................................................................... 7

5.1 Main Function.......................................................................................... 7

5.2 Home Position Adjustment .................................................................... 15

6. Control By Universal DMX Controller ........................................................... 20

6.1 DMX512 Connection.............................................................................. 20

6.2 Address Setting ...................................................................................... 21

6.3 DMX512 Configuration........................................................................... 22

7. Error Information......................................................................................... 33

8. Troubleshooting........................................................................................... 36

9. Fixture Cleaning........................................................................................... 37

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will

not accept liability for any resulting defects or problems.

Unpack and check carefully that there is no transportation damage before using the unit.

This product is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃.

DO NOT connect the device to any dimmer pack.

During initial start-up some smoke or smell may arise. This is a normal process and does not

necessarily mean that the device is defective, and it will decrease gradually within 15 minutes.

Make sure there are no flammable materials close to the unit while operating to avoid fire

hazard.

Examine the power wires carefully; replace them immediately if there is any damage.

Unit’s surface temperature may reach up to 75℃. DO NOT touch the housing bare-handed

during its operation.

Avoid any inflammable liquids, water or metal objects entering the unit. Once it happens, cut

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

off the mains power immediately.

DO NOT operate in dirty or dusty environment, do clean fixtures regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires together twist other cables.

The minimum distance between light output and the illuminated surface must be more than 3

meters.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to

damage or malfunction. Please contact the nearest authorized technical assistance center if

needed.

Disconnect the mains power if the fixture is has not been used for a long time.

DO use the original packing materials before transporting it again.

DO NOT look directly at the light while the LED is on.

DO NOT start on the unit without LED enclosure or when housing is damaged.

Installation:

The fixture should be mounted via its Omega Quick Release Clamp bracket. Always ensure that the

unit is firmly fixed to avoid vibration and slipping while operating and make sure that the structure

to which you are attaching the unit is secure and is able to support a weight of 10 times of the

fixtures weight. Always use a safety cable that can hold 12 times of the weight of the fixture when

installing.

The equipment must be installed by professionals. It must be installed in a place where is out of the

reach of people and no one can pass by or under it.

2. Technical Specifications

Power Voltage:

AC 100~240V, 50/60Hz

Power Consumption:

1370W

Light Source:

SUL1000X

Color temperature:

6500K

Beam Angle:

5°50°

CRI:

Ra>70

Ra>90: Switch to high CRI mode with high CRI filter (Setting in 17channel of 34/25CH, 12channel of

29/20CH)

Prism:

4 facet prism rotating in both directions

Movement:

Pan: 540°

Tilt: 270°

Pan/Tilt Resolution: 16 bit

Fixation: Pan/Tilt lock

Color Wheel:

1 color wheel with 5 colors plus white

Gobo Wheel:

1 static gobo wheel with 8 gobos plus open

1 rotating gobo wheel with 6 gobos plus open, easy to replace

Control:

DMX Channel: 34/25/29/20 channels

Control Mode: DMX512, Art-Net, RDM

Firmware Upgrade: Update via DMX link

Construction:

Display: LCD display

Battery backup for user setup without mains connection

Data In/Out: 3-pin and 5-pin XLR

Power In/Out: PowerCON in

Protection Rating: IP20

Features:

Linear CMY color mixing + Linear CTO color correction

2 new material frost filters (mild & moderate), effectively improve the brightness under frost mode

Motorized linear iris

4 fast and smooth framing shutters, each shutter blade position and angle can be controlled

individually; Each shutter blade can block out light completely, the framing module can be rotated

at ± 45°

Dimension/Weight:

465x352x836mm, 46.3kgs

18.3"x13.9”x32.9"in, 102.1lbs

Photometrics Diagram:

3. Control Panel

Wire Version:

Powercon Version:

1. Display: To show the various menus and the selected function

2. Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

3. BATTERY DISPLAY

4. Firmware Upgrade(USB Slot): Used to upgrade the unit firmware

5. ETHERNET: Transfers fixture’s information to a main controller

6. DMX IN: For DMX512 operation, use 3/5-pin XLR plug cable to link the units together

7. DMX OUT:For DMX512 operation, use 3/5-pin XLR plug cable to link the units together

8. POWER (Wire Version): To connect to the mains supply

9. POWER (Powercon Version): To connect to the mains supply

10. POWER SWITCH (Powercon Version): Turns on/ off the power

4. Color/Gobo

RED

GREEN

PINK ORANGE

BLUE

CRI

DANGER!

Install the color wheel/gobo wheel with the device switched off only.

Unplug from mains before changing the color wheel/gobo wheel!

CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be

opened!

5. How To Set The Unit

5.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until

the required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically

return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit menu mode.

The main functions are shown below:

DMX Setting

To select DMX Setting, press the ENTER button to confirm, use the UP/DOWN button to select

Address, Channel Mode, Connect Option, Offline Mode, Network, Art-Net, Repeat On DMX or

View DMX Value.

Address

To select Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the

address from 001 to 479/488/484/493, press the ENTER button to store. Press the MENU button back

to the last menu or let the unit idle 30 seconds to exit menu mode.

Channel Mode

To select Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to select

(34)Framing, (25)Spot, (29)F-Wash or (20)Wash, press the ENTER button to store. Press the MENU

button back to the last menu or let the unit idle 30 seconds to exit menu mode.

Connect Option

To select Connect Option, press the ENTER button to confirm. Use the UP/DOWN button to select

Auto, DMX or Art-Net, press the ENTER button to store. Press the MENU button back to the last

menu or let the unit idle 30 seconds to exit menu mode.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME Spartan Hybrid Bedienungsanleitung

ACME

ACME LED-HC50 II Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

ACME

ACME LED-245/2 Bedienungsanleitung

ACME

ACME Diamonds II Bedienungsanleitung

ACME

ACME Neozone Bedienungsanleitung

ACME

ACME GLORV FRAMING XP-5000SZF Bedienungsanleitung

ACME

ACME IM-250 SP Bedienungsanleitung

ACME

ACME LED-PS10 Bedienungsanleitung

ACME

ACME Dragon Scan 50 LED-SC50B Bedienungsanleitung

ACME

ACME Building wash Bedienungsanleitung

ACME

ACME STORM Bedienungsanleitung

ACME

ACME BRIGHT Bedienungsanleitung

ACME

ACME STAGE PAR 400 ZOOM IP Bedienungsanleitung

ACME

ACME LED-MS600 PE Bedienungsanleitung

ACME

ACME Glamour 350Z Bedienungsanleitung

ACME

ACME ENERGY SPOT XA-400 SPOT Bedienungsanleitung

ACME

ACME Theatre Spot 150m Bedienungsanleitung

ACME

ACME FLASHDOT Bedienungsanleitung

ACME

ACME Ozone 3 Bedienungsanleitung

ACME

ACME Xperior 1500SZ Bedienungsanleitung

ACME

ACME Dotline180 Bedienungsanleitung

ACME

ACME Colortec 250 Bedienungsanleitung

ACME

ACME Solaris Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung