ACME TRACK 10 Bedienungsanleitung

Features

E-10T/E-40T is Track Version, uniform light, sharp image edge, and

self-locking focus lens.

The product takes advantage of the heat pipe heat conduction and housing

feature to dissipate heat without fan to prolong LED life.

Specifications

Power Voltage: AC 85~127V, 50/60Hz

AC 175~264V, 50/60Hz

Power Consumption: 15W (E-10T)

30W (E-40T)

Light Source:

E-10T CW DXX: LTAW1202-012-007-5500

E-10T WW DXX: LTAW1202-012-007-3150

E-40T CW DXX: C117C1206-036-001

E-40T WW DXX: C117W1206-036-001

Color Temperature: 5600K±150K (E-10T/40T CW)

3200K±150K (E-10T/40T WW)

Beam Angle: 19°/26°/36°/50°(optional)

CRI≥95

Dimension/Weight: 273x231x128mm, 1.3kgs

10.7”x9.1”x5”in, 2.9lbs

Photometric diagram:

E-10T

273

231

128

Distance(m) 2 4 6 8

310 77 34 19

212 53 23 13

540 135 60 33

415 103 46 25

Distance(m) 6

Diameter(m)

СW/WW 1.31 2.59 3.91 5.19

Diameter(m)

CW/WW 1.87 3.73 5.59 7.46

1898 475 211 120

981 246 109 62

2002 501 223 125

Diameter(m)

CW/WW 0.68 1.34 2.01 2.68

1095 274 122 68

Diameter(m)

CW/WW 0.94 1.85 2.78 3.70

E-40T

How To Change The Gobo

At first, put the gobo by hand as the arrow into the gobo gel splint, and

insert the gobo gel splint into the slot of the unit, please turn the hand

knob to left or right in order to take out gobo gel splint.

Note: The diameter of the inner and outer rings of the gobo, the size and

thickness of the gobo gel splint are shown in the following figure:

Distance(m)

2 4 6 8

Diameter(m)

CW/WW 1.31 2.59 3.91 5.19

Diameter(m)

CW/WW 1.87 3.73 5.59 7.46

Diameter(m)

CW/WW 0.68 1.34 2.01 2.68

Diameter(m)

CW/WW 0.94 1.85 2.78 3.70

1170 290 130 70

1010 250 112 62

1842 461 205 115

1950 488 215 121

2920 730 322 180

2758 680 310 170

596 150 66 37

517 130 56 32

The Color Gel Splint Installation

At first, please push the Lock Cap button by hand as the arrow, and move

away the Lock as the arrow, then insert the color gel splint into the inside

slot from topside, and fasten the lock.

How To Change The Focus Lens

At first, please push the screws on both side of the fixture by hand as the

arrow, and move away the focus lens silently by hand as the arrow.

Then insert the focus lens as the arrow silently, and insert the screws in

place by hand as the arrow, and fasten the lens.

Installation

First fix the track on the ceiling with the screws，put the dial on “OFF” of

the twist switch and rotate the tumbler switch 90 degrees clockwise.

Three wire Connector

Tumbler Switch

Twist Switch OFF：

Tumbler Switch:

Twist Switch

Rotae 90degreesclockwise

Put the three wire connector into the track groove, the lamp body is fixed.

Then rotate the tumbler switch 90 degrees counter clockwise and make

sure the twist switch on“ON”.

After the lamp body is fixed, it can be energized.

Reference Diagram for choice of connectors

Troubleshooting

The fixture does not work, no light

1. Check the connection of power and main fuse.

2. Measure the mains voltage on the main connector.

Fixture Cleansing

The cleaning of internal and external optical lenses and/or mirrors must be

carried out periodically to optimize light output. Cleaning frequency

depends on the environment in which the fixture operates: damp, smoky

or particularly dirty surrounding can cause greater accumulation of dirt on

the unit’s optics.

Clean with soft cloth and use normal glass to clean liquid.

Always dry the parts carefully.

Clean the external optics at least every 20 days. Clean the internal

optics at least every 30 days.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME DMX512 Dynamic Scan Bedienungsanleitung

ACME

ACME CHIRON Bedienungsanleitung

ACME

ACME LED-PS10 Bedienungsanleitung

ACME

ACME Spider FC Bedienungsanleitung

ACME

ACME BW-54-10FC II RL Bedienungsanleitung

ACME

ACME Theatre Spot 150 Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME Thunderbreaker Bedienungsanleitung

ACME

ACME ColorTec 250 LED-CC60 Bedienungsanleitung

ACME

ACME LED-PS10D RGBW Bedienungsanleitung

ACME

ACME CRUX Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME Xperior 1500SZ Bedienungsanleitung

ACME

ACME Xperior 700SZ Spot Bedienungsanleitung

ACME

ACME Xperior XP-380 BEAM IP F Bedienungsanleitung

ACME

ACME IL-2420 II Bedienungsanleitung

ACME

ACME Colortec 250 Bedienungsanleitung

ACME

ACME Spartan Hybrid C Bedienungsanleitung

ACME

ACME iSolution Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

ACME

ACME Dragon Scan 50 LED-SC50B Bedienungsanleitung

ACME

ACME Dynamic 25 Roller LED-SC25B Bedienungsanleitung

ACME

ACME SABER HYBRID PRO Bedienungsanleitung

ACME

ACME TV LIGHT PANEL 2000 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

Alien

Alien RG STAR Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung