ACME Xperior 1500SZ Bedienungsanleitung

XperiorTM 1200/1500SZ Spot

User Guide

Please read these instructions carefully before use

XP-1200/1500SZ

CONTENTS

1. Safety Instruction...............................................................................3

2. Installation.......................................................................................... 5

3. Technical Specification .....................................................................6

4. Description ......................................................................................... 9

4.1 Description of the fixture....................................................................................................9

4.2 Control Panel ..................................................................................................................10

5. Gobo and Lamp................................................................................ 11

5.1 Inserting/Exchanging rotating gobos...............................................................................11

5.2 Lamp...............................................................................................................................12

6. How To Set The Unit ........................................................................13

6.1 Power On Display............................................................................................................13

6.2 Main Function..................................................................................................................14

6.3. Home Position Adjustment.............................................................................................24

6.4. Error Information ............................................................................................................27

7. Control By Universal DMX Controller ............................................ 28

7.1 Connection......................................................................................................................28

7.2 Channel Mode Setting.....................................................................................................29

7.3 Address Setting...............................................................................................................29

7.4 DMX 512 Configuration...................................................................................................29

7.5 Lighting Library Download...............................................................................................37

8. Update Software...............................................................................37

9. Troubleshooting...............................................................................37

10. Maintenance and Cleaning............................................................39

XP-1200/1500SZ

1. Safety Instruction

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be

sure that they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty.

The dealer will not accept liability for any resulting defects or problems.

yUnpack and check carefully that there is no transportation damage before using the

unit.

yThe unit is for indoor use only. Use only in a dry location.

yDo install and operate by qualified operator.

yDo not allow children to operate the fixture.

yUse safety chain when fixing the unit. Handle the unit by carrying its base instead of

head only.

yThe unit must be installed in a location with adequate ventilation, at least 50cm from

adjacent surfaces.

yBe sure that no ventilation slots are blocked, otherwise the unit will be overheated.

yBefore operating, ensure that the voltage and frequency of power supply matches the

power requirements of the unit.

yIt’s important to ground the yellow/green conductor to earth in order to avoid electric

shock.

yMaximum ambient temperature TA: 40 . Don’t operate it℃when the temperature is

higher.

yDon’t connect the device to any dimmer pack.

yDuring initial start-up some smoke or smell may arise. This is a normal process and

does not necessarily mean that the device is defective, and it will decrease gradually

within 15 minutes.

yMake sure there are no flammable materials close to the unit while operating to avoid

fire hazard.

yExamine the power wires carefully; replace them immediately if there is any damage.

yUnit’s surface temperature may reach up to 85 . Don’t touch the housing bare℃-handed

Please read carefully the instruction manual, which includes

important information about the installation, usage and maintenance.

XP-1200/1500SZ

during its operation, and allow about 15 minutes for cooling the unit down before

replacing bulb or maintenance as it could be very hot.

yAvoid any inflammable liquids, water or metal objects entering the unit. Once it

happens, cut off the mains power immediately.

yDo not operate in dirty or dusty environment; do clean the fixture regularly.

yDo not touch any wire during operation as there might be a hazard of electric shock.

yAvoid power wires twist other cables.

yThe minimum distance between light output and the illuminated surface must be more

than 2.5 meters.

yDisconnect mains power before fuse/lamp replacement or servicing.

yReplace fuse/lamp only with the same type.

yIn the event of serious operating problem, stop using the unit immediately.

yNever turn on and off the unit time after time.

yThe housing, the lenses, or the ultraviolet filter must be replaced if they are visibly

damaged.

yDo not open the unit as there are no user serviceable parts inside.

yNever try to repair the unit by yourself. Repairs carried out by unskilled people can lead

to damage or malfunction. Please contact the nearest authorized technical assistance

center if needed.

yDisconnect the mains power if the fixture is has not been used for a long time.

yDo use the original packing materials before transporting it once again.

Caution

yTo prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or

moisture.

yHot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.

yDo replace the bulb once it is damaged, deformed or life-expired.

yDo not look directly at the light while the bulb is on.

yNever touch bulb with bare fingers, as it is very hot after using.

yDo not start on the unit without bulb enclosure or when housing is damaged.

Product Items

yUser manual

y2 x Omega clamps

XP-1200/1500SZ

2. Installation

Unpacking the fixture (for flight case pack only)

1. Stop the flight case via the brake sheet above the wheels.

2. Unlock the lock modules (1) and (2), open the cover board.

3. Prop the cover board with lid bracket and open the side

board.

4. Take out the fixture.

5. Unlock the lock module (3) take out omega clamps, safety

cable and gobo.

Installation:

1. Bolt each clamp (1) to the Omega holder with screw and lock nut through the hole in the

holder.

2. Fasten the omega holders (2) on the bottom of the base by inserting quick-lock

fasteners (3) into the holes of the base and tighten fully clockwise.

3. Hang the fixture to the support (4) through clamp and fasten the screws (5). Fasten the

safety cable (6) through the bottom of the base and over the support.

Fig.1 Fig.2

Attention:

yAlways ensure that the structure to which you are attaching the unit is secure and is

able to support a weight of 10 times of the unit’s weight without any harming

deformation.

yAlso always use a safety cable that can hold 12 times of the weight of the unit when

installing the fixture.

yMake absolute sure that the unit is firmly fixed in way that no vibrating or slipping would

XP-1200/1500SZ

occur during operation.

yThe equipment must be installed beyond the areas where

persons may walk by or be seated.

yThe rigging has to be operated by or under the guide of a

skilled person.

yThis unit is fully operational in two different mounting

positions, hanging upside-down from a ceiling, or set on a

flat level surface.

3. Technical Specification

Power supply

- 208~240V 50/60Hz

Power Consumption

- 1749W (230V)（XP-1500SZ）

- 1470W (230V) (XP-1200SZ）

Fuse

- 6.3A for PCB

-15A for lamp

Lamp

- HTI 1500 W/60/P50 (OSRAM)

Battery backup display

- Setting DMX address or other functions without connecting to mains power.

-Battery for LCD display charges automatically when the fixtures connects to the mains

power.

- No need to change battery.

Wireless control (for the unit with wireless receiver built-in only)

- Wirelessly controlled by W-DMX (option).

- Each W-DMX is sending out 512 channels of DMX.

-License free band of 2.45 GHz

Optical system

- High efficiency optical system, delivering extremely powerful output

- High quality dichroic lenses

- Beam angle: 12°~30°

XP-1200/1500SZ

Dimmer/Shutter

- Blackout, 0~100% smooth dimming, independent shutter and various strobe effect.

Color wheel

- Color wheel: 7 dichroic colors + open.

- Rainbow effect in both directions.

- Easy calibration and maintenance by magnetic home positioning.

Gobo wheel

- Gobo Wheel1: 6 rotating, indexable, easily replaceable dichroic glass gobos + open.

- Gobo Wheel2: 6 rotating, indexable, easily replaceable dichroic glass gobos + open.

- Easy calibration and maintenance by magnetic home positioning.

- Module design for easy assembly and service.

Effect Wheel

- 3/5 facets Prisms/ diagonal Prism / water effect glass

- Rotating Effect wheel

Movement

- Pan: 540° in 2.8 second.

- Tilt: 270° in 1.6 second.

- Pan/Tilt resolution: 8/16-bit.

- Automatic Pan/Tilt correction.

- Easy calibration and maintenance by magnetic home positioning.

- Pan/Tilt position lock for transporting protection.

Focus

- 2m ~ infinity.

Zoom

- Motorized linear zoom for smooth adjustment

of beam size and beam sharpness.

Iris

-Motorized, stepless.

Frost effect

-Variable, separate effect.

Protocols

- DMX 512

- Date input/output: 3/5 Pin XLR socket

XP-1200/1500SZ

Weight: 40.5kgs

Dimension: 557× 435×759 mm

Photometric diagram

XP-1500SZ XP-1200SZ

DMX Channels

Mode

Channel

Mode 1

24-CH

Mode 2

24-CH

Mode 3

32-CH

1 Pan Shutter Pan

2 Pan Fine Dimmer Pan Fine

3 Tilt Cyan Tilt

4 Tilt Fine Magenta Tilt Fine

5 P /T Speed Yellow P/T Speed

6 Shutter 3200K(CTO) Special Function

7 Dimmer Color P/T Macro

8 Color Gobo 1 P/T Macro Speed

9 Cyan R-Gobo 1 Color

10 Magenta R-Gobo 1 Fine Cyan

11 Yellow Gobo 2 Magenta

12 3200K(CTO) R-Gobo 2 Yellow

13 Preset Color R-Gobo 2 Fine 3200K(CTO)

14 Gobo1 Prism Preset Color

15 R-Gobo1 R-Prism CMY Speed

16 Gobo2 Iris Color Macro

17 R-Gobo2 Focus Gobo 1

XP-1200/1500SZ

18 Prism Zoom R-Gobo 1

19 R-Prism Pan R-Gobo 1 Fine

20 Iris Pan Fine Gobo 2

21 Frost Tilt R-Gobo 2

22 Zoom Tilt Fine R-Gobo 2 Fine

23 Focus P/T Speed Prism

24 Special Function CMY Speed R-Prism

25 R-Prism Fine

26 Frost

27 Iris

28 Zoom

29 Focus

30 Shutter

31 Dimmer

32 Dimmer Fine

4. Description

4.1 Description of the fixture

The head can be locked for transportation protection-the tilt lock button (4) is pressed and

the pan lock/unlock lever (6) is in lock position. To unlock the head, press the tilt unlock

button (5) and move the pan lock/unlock lever (6) to unlock position.

Caution: The head and arm must be unlocked before operation!

1.Arm

2.Front panel

3.head

4.Tilt lock button (Black)

5.Tilt unlock button (Gray)

6.Pan lock

7.Handle

8.Base

9.Antenna (for XP-1500SZ WT only)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME DOT Bedienungsanleitung

ACME

ACME Theatre Spot 150m Bedienungsanleitung

ACME

ACME Spartan Hybrid C Bedienungsanleitung

ACME

ACME LP-1600 BD30 Bedienungsanleitung

ACME

ACME LED-PS10 Bedienungsanleitung

ACME

ACME LED-WAV-10W Bedienungsanleitung

ACME

ACME Energy Spot PRO Bedienungsanleitung

ACME

ACME DIABOLO 500 Bedienungsanleitung

ACME

ACME LED-SC25 Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME Spider FC Bedienungsanleitung

ACME

ACME XP-5000WZ Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME IM-250 SP Bedienungsanleitung

ACME

ACME Gemini Bedienungsanleitung

ACME

ACME Solaris Bedienungsanleitung

ACME

ACME ASTRO LED-256D Bedienungsanleitung

ACME

ACME Dragon Scan 50 LED-SC50B Bedienungsanleitung

ACME

ACME Theatre Spot 150 Bedienungsanleitung

ACME

ACME Thunderbreaker Bedienungsanleitung

ACME

ACME BIG BANG Bedienungsanleitung

ACME

ACME STORM Bedienungsanleitung

ACME

ACME MP-12FC Bedienungsanleitung

ACME

ACME SABER Mini Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung